Is there a way to open the last file I used in InDesign/Illustrator/Photoshop when I open the app

I want to create a shortcut (Win7) that will automatically open the last file I used in the above apps when I open the app. Is there a command line switch like /r or /l that does that?

Thanks, your point is well taken... It would be nice, though, to have the ability to sort a "Last Used" column in iTunes and select a bunch of apps to remove in one shot.

Similar Messages

  • HT1752 I recently purchased an old iMac G3 Macintosh. I was wondering, is there a way where I can update it without using an external disc? I've seen the newer Apple products with the dock, if I update my iMac G3, will it have that, and if so, how can I d

    I recently purchased an old iMac G3 Macintosh. I was wondering, is there a way where I can update it without using an external disc? I've seen the newer Apple products with the dock, if I update my iMac G3, will it have that, and if so, how can I do that?

    I was wondering, is there a way where I can update it without using an external disc?
    If you mean the iMac does not have an internal optical drive capable of reading DVDs, the only option requires another Mac with a DVD-capable drive and FireWire ports. Your iMac G3 will also require FireWire ports. Not all G3 iMacs have Firewire. FW started with the Summer 2000 models with 400mHz and faster processors.
    With FireWire, you can use FireWire Target Disk mode to install from a retail OS install DVD in another Mac. If you supplemental info info tells us if you have another Mac with a DVD reader and the FW ports, we can walk you through the process.
    If the iMac has a tray-loading drive, I'd forget it. They are very limited not only in the OS max (10.3.9) but also in RAM capability. Starting with the slot-loading iMac G3s, the max RAM increased to 1 GB (2 X 512MB modlules). Tiger likes 1GB RAM.
    Understand that pre-Intel Macs are getting harder to use. Even with 10.4.11, your choice of browsers is limited (TenFourFox is the most viable option) and the G3s  rudimentary video hardware means web browsing will be choppy at best.
    If you are in the USA, you can try calling the Apple Store (1-800-MY-APPLE) for an OS disk. As recently as Jan 20, someone posted here that they were able to buy Tiger by calling. It was not clear whether the disks were replacement system install/restore disks or full retail install, but it's a free call.
    When you do "About this Mac" to check teh OS verion, also look at the processor speed and tell us what that says. That can help with recommendations for an upgrade path.

  • Is there a way to load a movie file created using FlattenMovie() function ?

    Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
    The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

    Hi telsenbroich,
    Have a look at this response
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Is there a way to save an image file as a jpeg and add -web or -print to the file name?

    I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name.  This way I can easily see which files are lower resolution for web posting or high resolution for printing.

    Jason,
    I helped somebody do a very similar thing about a week ago.
    The trick is to use the Batch command's ability to construct a file name.
    Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
    The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
    The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
    Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
    Then rename "*-x.jpg" to "*-web.jpg".
    See http://forums.adobe.com/thread/1038992?start=32
    The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
    I hope the disagreements in that thread don't cause too much disruption.
    If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

  • Is there a way to make a mobile number clickable in an inDesign PDF document, that will open a Texting or Instant Messaging Application?

    Thoughts are to allow groups of individuals mobile numbers to be shared across larger organizations, from within a PDF document, that the mobile numbers would be clickable, and open up a Text or instant messaging application on either the computer, tablet, or smart phone, for instant communication.

    1st, more information will help people help you... Information FAQ http://forums.adobe.com/message/4200840
    2nd, did you do as directed in next link, to be sure your sequence and video match?
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    3rd, what... exactly... are you editing?
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/
    4th, buying a 2nd hard drive now does not mean you can't move that drive to a new computer
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339 is a good drive

  • Is there a way to split a Muse file so that 2 or 3 developers can work on the project?

    I would like to know if using both Muse and Business Catalyst we can split the work so that 2 or 3 developers can work on the project?  I know that we can use folders for each developer however by doing so it creates an index.html in each of the folders.
    Has anyone been able to create an environment for multiple developers on the same project?

    Hi Gaurav,
    I appreciate the reply.  The thread you provided is not quite what I was looking for.  I have a site that I would like 2-3 Muse developers to work on.  They would each get a piece of the site and we would somehow pull it together into one cohesive program.  For example we have an association made up of 20 villages.  One developer would work on the individual village pages, another on the overall structure of the association and a third work on the Amenities.  Everyone would need to be working at the same time using MUSE.  I don't think we want to be doing any development in BC.
    Anyone else out there who is doing something similar?

  • Is there a way to upload a .pdf file to use for my newsstand app?

    I am making a newsstand app, but i would like to know if i can put a .pdf, or prefearable and InDesign interactive .pdf into xcode. Or is there another better way to put my magazine content into newsstand. Please Help.

    Welcome to the Apple community.
    Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

  • How to get the update file without using Nokia Sof...

    The network connection is unreliable and downloading the firmware update using PC Suite for my Nokia E90 proves difficult. Does anyone know how I can get the firmware version 300.34.84?
    The trouble is Nokia's Software Updater does not accommodate any slight interruption to the connection during the update process. I will update this discussion with what version of PC Suite I have once I get that info.
    Any help is kindly appreciated

    In fact, it is not Possible to get the update file without using Nokia Software Updater or you should search the net to find the update files in another place and even you get them, you can not use them with NSU.
    You can Update your Device with:
    1 - NSU (Nokia Software Update)
    2 - FOTA (Firmware Over The Air) for FP2 devices ONLY.
    3 - Nokia Care Center
    there is not other way to upgrade.
    Hope useful for u.
    regards
    Nokia N79 4GB
    SW Version: 32.001 RM-348 MEA

  • How can i do the upload file function using tomcat library??

    how can i do the upload file function using tomcat library??

    Did you read the document for the library?
    If you can't figure it out, why don't you ask the people who provide the library?
    This has nothing to do with JavaMail.

  • When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

    When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

    Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * https://support.mozilla.com/kb/Firefox+hangs

  • Is there a setting such that the application closes (quits) when the (last) file is closed? Why does the application remain active when there are no files for it open?

    I honestly did try to find my own answer, but cannot.  Not sure why a simple question would have its answer so difficult to find. I'd just like the application to simply close after the last file is closed.  It seems strange to have the application remain active.  Thanks for your help.

    It's also a bit strange that even though I searched throughout the community for questions like this......so that I wouldn't take up space for something already discussed........that immediately after I posted my question, the "
    More Like This" side window comes up that describes questions just like mine. 
    So, sorry to have bothered anyone with having to read another duplicate question.  I see that the answer to my first question is "No", and there's likely not a good answer for "Why".
    Thanks anyway.

  • __Is anyone else having CS5 open the last file automatically (whether they want it or not)?

    Is anyone else having CS5 open the last file automatically (whether they want it or not)? - some of the time it appears this causes a crash as well!
    Is there a way to turn this off?

    I betcha you are a recent convert to Lion!
    It's a system wide "preference"; fortunately, there is an option somewhere in your System Preferences (*not* Illustrator's) to switch this totally annoying, bug-infested, problem causing "new improved what-the-xxxx-were-they-thinking" new feature off.
    I did that SO fast after installing Lion, I can't even recall where to change it. I NEVER ever want it back ON again, so no loss there.

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • How do you stop the last file from opening on launch?

    InDesign CS5 insists on re-opening the last file I had open everytime I launch the app. I have tried making sure that all documents are closed before quitting ID with no success. I have looked through the prefs but can't seem to locate anything that changes this. I am on a Mac running Lion (10.7.4) and have looked for an OS level solution but haven't found anything and no other app is behaving like this. I did search in these forums and haven't found an answer.
    Anyone out there have any idea or is this an isolated occurrence? Thanks.
    Mike

    Nevermind. Found the answer -

  • Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

    Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

    The only thing I can think of is to set the number of days to sync messages, shown below. But I'm not sure if this is what you're after. If it is go to Settings > Mail, Contacts, Calendars select the email account you wish to change.
    This will then only sync emails from the last week for example. In the screenshot all email messages would be synced to the iPhone.
    Message was edited by: Michael Bratley

Maybe you are looking for