Is there a way to open the mic using apple remote desktop

Is there a way to open the mircophone channel using Apple Remote Desktop so I can listen on anything thats happening at my computer at home? If not is there another software that would work?
You would have to launch software that would accept audio from the microphone and transmit it to you in some fashion. ARD does not transmit audio itself. Another remote control solution such as Timbuktu might transmit audio, so you could look into that, perhaps.
Also is there a way to use apple's software to control and watch a PC?
You can install a VNC server on the PC and ARD can then take control of the system. It can be tricky to find a VNC system that will work with ARD, though, so search this forum for "VNC" for possible options. One of the applications that support Microsoft's remote desktop architecture such as their own Remote Desktop Connection Client for Mac or iTap Mobile RDP will probably work better, though.
Regards.

Similar Messages

Is there a way to open the right click menu on the left side of your pointer?

Whenever I try to right-click an object that's located on the right side of the screen, the pointer always automatically click whatever entry in the right-click menu which just happens to be under the pointer the moment the menu is opened. I noticed that the reason this happens is because the right click menu always forces itself to open on the right side of the pointer, and when there isn't enough space, the right-click menu will open underneath the pointer. Since this is horribly inconvenient, is there a way to open the right-click menu on the left side of your pointer?

Are you saying you have an icon on the far right side and when you rt click on it, your pointer ends up opening wherever it lands? That is a two step process, or normally should be at least a two step process. Do you have a Mouse in your Control Panel? You should check, because there may be some properties with which you can play. For instance, I can switch primary and secondary functions on my mouse buttons by checking a box.
When I rt click on right side, the menu opens on the left.
When I rt click on left side, the menu opens on the right.
In order for me to take an action, I then have to move to an area in that menu and click.
I hope I understood your question correctly.

Is there a way to open the notification pane using magic mouse?

Is there a way to open the notification pane using magic mouse? i mean it would be great if i could two finger swipe to the right for the notification pane (two finger swipe left opens dashboard)
I have Magic Prefs if it helps

It doesn't seem like this is possible in 10.9.1. Can someone at Apple confirm or provide a solution?

Is there a way to open the /dev/ folder through Finder?

Is there a way to open the /dev/ folder through Finder?
I already have show all files on but it still doesnt show unless you use Terminal.

Joaquin684 wrote:
I need to acess the root_device for testing.
Testing what? Anything in /dev is entirely foreign to the Finder. Stay in Terminal for that stuff.

Is there a way to open the main browser when only the download window is open ?

Many times I have closed the browser by accident, or when to many windows are open and just cleaning up... normally this happens when a download is being done and then when trying to open the browser again it is not allowed for an instance is already running. Is there a way to open the browser back up just from the download window ?? This does cause the pausing and retry of the download of course, but when doing large files ... gigers, many times I have lost it completely, is there a way around this besides the obvious do not close ?

I know of no way to re-open Firefox in your case. However, you can set a preference that will give you a pop-up message when a download is in progress, then you have 2 options presented; continue with closing Firefox which will cancel the download or cancel closing Firefox and the download will continue. This way one last Firefox browser window remains open along with the download window.
To have Firefox warn you when a download is in progress and you choose File > Exit, change a preference:
#type '''about:config''' in the URL/location bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = browser.download.manager.quitBehavior
#right-click (OSX: Cmd+click) on that preference
#choose Modify
#enter a new value of 2
#click OK
#you may need to restart Firefox for the change to take effect
See:
* the attachment to this response in lower left corner (DownloadOnExitWarning.PNG)
* http://kb.mozillazine.org/Browser.download.manager.quitBehavior

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm

Is there any way to get the query used in discoverer from backend??

Hi All,
I am new to dicoverer.
Is there any way to get the query used in discoverer from backend??
Thanks,
Sachin

Hi,
you can view the SQL from within the discoverer menu:
in desktop: View-> SQL Inspector
in Plus: Tools-> Show SQL
The SQL in the DB tables is encrypted so it's a problem getting it from there.
You can export the workbook into SQL but it is not working for every worksheet (subquery, inline pivot tables...)
you can create a batch file to export them all using the output of this script:
select null,null,'echo off'
from dual
union all
select distinct
qs.qs_doc_name Workbook_name,
qs.qs_doc_details Worksheet_Name,
'start /wait <path>\dis51usr.exe /connect '||'&p_user_name'||'/'||'&p_password'||'@'||'&p_env'||' /apps_user /apps_responsibility "&responsibility" /opendb '||
chr(34)||qs.qs_doc_name||chr(34)||' /sheet "'||qs.qs_doc_details||'"'||' /export SQL "C:\Export Discoverer SQL\'||qs.qs_doc_name||'-'||qs.qs_doc_details||'.sql" /batch'
from eul_us.eul5_qpp_stats qs
where qs.qs_doc_name is not null
--order by 1,2
union all
select null,null,'echo off'
from dual
union all
select null,null,'exit'
from dual

Is there any way that to install and use firefox remotely on centos 6?

Hello everyone
i rent a dedicated server that using centos 6...I'm going to browse through the internet with that.can anyone tell me, is there any way that to install and use firefox remotely on centos?
(just like utorrent server)
tnx

Install a proxy server on the centos machine and configure your local Firefox to connect through that proxy.
If you really want to run Firefox on the centos machine, install a VNC server instead.
(Obviously, use Google if you don't know what that means ;)

Can I use Apple Remote desktop to connect over the internet?

I would like to use Apple Remote Desktop to connect back to my MacPro desktop at home while I am on my Macbook Air at work. Will I need a static IP from my service provider to do it.

Hi
It's not absolutely necessary but it would be more useful if you did have one. Most ISPs will require you to have a business class broadband service at your home rather than a residential one. These cost more (a lot more in some cases) than a residential service. Call your home location's ISP and discuss it with them.
If the cost is too much then you could go for a DynDNS account which is free. The details of this account would be configured in the whatever you're using as a firewall at your home's location. This assumes the firewall has the facility to add such an account. Thereafter it's just a question of configuring the port fowarding feature of that firewall.
A potentially 'big' problem though is whether or not your workplace will allow that kind of traffic out of their network. This would be something you'd need to discuss with them first.
HTH?
Tony

HT4399 I have a Mac Book Air and have purchased individually numbers and pages. I was given an excel file on a thumb drive and cannot open it. Is there a way to open the xcl file in numbers?

I have a MacBook Air, and have purchased individually Numbers and Pages. I was sent an Excel file on a thumb drive but cannot open the file. The message states that the Excel file is encryeted. Is ther any way to open a PC file on my Mac Book Air?
Pat and Bob

Excel does not use the .xcl extension for any of its native file formats? The only files I've ever seen with xcl as the file extension were associated with embedded application code projects.
If this is in fact an Excel file, but an encrypted one, you cannot open it (in excel or any compatible application) without the decryption password.

HT201272 Is there any way to open the apps on your computer once you have sync your phone

Is there any way to open an use the apps once u have transfered them on your computer
from your Iphone ??

No.
Apps are for iphone/ipod/ipad only

Is there a way to open the apple menu other than clicking on the apple

Are there alternative means to open the Apple Menu?

Press control + F2. If this doesn't work, press control + fn + F2. Then use the up and down arrow keys.

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

Is there a way to affect the URL used when running a report subscription?

We are using SQL Server 2008 R2. I am finding out that when running a report subscription to extract a file in csv format, an extra blank line is created at the bottom (i.e., extra line feed), and the mysterious BOM characters also get inserted at
the beginning. Both of these "features" are causing problems with a client's import of these files. Of course, it affects multiple clients.
I have done some research and have found information on how to edit the rsconfigserver file to render CSV files using ASCII and to not use Excel formatting. This removes both "features"/problems stated above.
However, editing the server config file will affect all csv extractions on that report server. Is there a way to control the URL of a specific report subscription to include these values (so only the reports that need the fix get it)? For example,
someone gave this URL as an example of how to add parameters including encoding in the URL. http://MyReportServer/ReportServer?%2fReport+Folder%2fReportName&rs:Command=Render&rs:Format=CSV&rc:Encoding=ASCII
Is there a way to have the report subscription run the report using a URL like this so it extracts it without the BOM characters? I was thinking a data driven subscription would allow me to set the values like this, but these parameters are only pertinent
AFTER the report is run and only needed for the final rendering. Not sure how to do this. Maybe it's not possible. If it's not, that's fine. I just need to write a proposal to our DBA's to talk them into making a couple edits to the server config
file.
Has anyone ever worked around this before in SSRS?
Thank you!!
Dana

Hi DanaSSRS,
According to your description, you want to have some report exported into CSV file with ASCII encoding when running a subscription. Right?
In Reporting Services, when we run the subscription, it will call the Render Extension as we configured in rsreportserver.config file, we can't set the Render format with ASCII Encoding on subscription level. As you said, the Render Extension we configured
in the rsreportserver.config will apply to all reports. In this scenario, you only want that extension apply to specific reports. For your requirement, we suggest you add a custom Render Extension in configure file. You just need to copy the CSV Extension
and add a <OverrideNames/> to override a new name. Then set the <Encoding> in <Configure>. And you can select this custom Extension when creating the subscription. This might be the most effective workaround.
Reference:
Customizing Rendering Extension Parameters in RSReportServer.Config
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Is there a way to open the mic using apple remote desktop

Similar Messages

Maybe you are looking for