Is there a way to republish the entire website instead of just the changes made?

Okay, hopefully I can explain everything clearly here.
I am hosted by bluehost.com
I am on a mac.
I am using iweb version 3.04.
Here is my website: alleycatfacepainting.com
So, I am having a problem with a particular page. After 2 hours of being online with bluehost, we discovered that when I republish in iweb, it does not seem to replace the old files in bluehost. The only way to see the changes is to delete the bluehost file and then republish. The problem is, I would have to rebuild the entire page in order for it to show up as a fully functioning page online because iweb seems to only publish the changes you make, rather than the entire page or entire website.
What I want to know is...is there a setting I can change so that my entire website gets uploaded when I publish rather than just the individual change?
Or...is there a way to trick iweb into thinking its never uploaded that website before?
Thank you for your answers.

It is kind of strange that the files are not being overwritten. If you publish to a local folder and upload with an FTP app you should be able to set this to over write the old files.
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

Similar Messages

  • Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

    To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
    I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
    Are there any settings in about:config that will allow me to make these changes?
    EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

    This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    .urlbar-textbox-container {color: inherit !important;}
    .urlbar-textbox-container-children {opacity: 1 !important;}
    .urlbar-over-link-box {opacity: 0 !important;}
    </nowiki></pre>
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  • How do I Disable protection on an entire website instead of just one page?

    "Firefox has blocked content that isn't secure"
    How do I allow it?
    In this article-
    https://support.mozilla.org/en-US/kb/how-does-content-isnt-secure-affect-my-safety?as=u&utm_source=inproduct#firefox:mac:fx28
    It tells you how to bypass the protection on a single page and you can do it on a page by page basis. But I am using pearson labs for schools and it blocks the media on the exams. I can only access the exam once. I can't reload it for ever new page or I get locked out before i am finished. Is there a way to enable all of pearson labs?

    The developers did consider adding the ability to make a "per server" exception, but ultimately that was not added (maybe because different pages on a site can have different levels of data sensitivity and/or different sources of mixed content, so it would undermine safety).
    Unfortunately, I think you might need to temporarily disable mixed active content blocking during the time you use this site if you cannot reload pages.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box that appears above the list, type or paste '''mixed''' and pause while the list is filtered
    (3) Double-click the '''security.mixed_content.block_active_content''' preference to switch it from true to false
    (4) Keep this tab open and switch it back when you are finished with the trusted site

  • Is there a way to revert the changes iTunes made to the information for many of my songs?

    I was going through my songs to add further details and album artwork. The box that pops up when many songs are being amended at once came on my screen but I simply thought it to be iTunes doing something I need not worry about. I eventually looked to the top of the screen and, when before Accidental Mersh's "Mirror Israeli" was playing, iTunes showed the band playing "Mirror Israeli" to be Songs for Walter. I switched to the artist tab and over half of my 4k+ songs have been edited to be of the album Songs for Walter by Songs for Walter. Aside from going through each individual song/ album and changing it, do you think there are any ways to change them back?
    Additional information: I updated iTunes maybe four hours ago to the latest version. And, no, I did not shift-click all of these songs.

    This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    .urlbar-textbox-container {color: inherit !important;}
    .urlbar-textbox-container-children {opacity: 1 !important;}
    .urlbar-over-link-box {opacity: 0 !important;}
    </nowiki></pre>
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  • Is there a way to fix the change in copy and pasting email addresses?

    In the past, whenever I've copied and pasted email addresses, for example, copying the email address from one email into a form field on a Web page, Address Book, or even the search field in Mail, only the email address would get pasted in. Now, since I've upgraded to Snow Leopard, it seems, the name and email address is getting pasted in like this: "NYTimes.com" <[email protected]>.
    It seems when pasted into the search field like this, even Mail has trouble finding other emails with the same address, which is often what I use it for. Is there a settings fix for this or am I just going crazy?
    Thanks,
    Bob

    I found it in Mac tips
    Thankfully, Apple included a hidden preference to revert to the 10.5 behavior of copying only the e-mail address. Quit Mail if it’s running, then enter this command in Terminal (in Applications -> Utilities):
    defaults write com.apple.mail AddressesIncludeNameOnPasteboard -bool NO
    Restart Mail, and Copy Address will once again do just what it says, which is the preferred behavior for my use of Mail. If you try this and decided you prefer the default version, quit Mail and run this command in Terminal:
    defaults delete com.apple.mail AddressesIncludeNameOnPasteboard
    Thanks to the fine folks at ecamm network for digging this one out and writing about it on their blog.

  • Is there a way to convert an entire PDF doc (not just one page) to two-tone (blue)?

    I know how to convert a page at a time to blue, but need to be able to do entire documents.  Is it possible?

    It would be best to convert in the program that was used to originally create the PDF file. Or you can use a PDF file editor.
    Photoshop is not a PDF file editor. Photoshop is a PDF file rasterizer .

  • Undoing the changes made to DSO

    Hi
    One of our developers had modified one DSO and its transformation etc long time back and since the change was put on hold did not transport it to Quality or Prod. Now we have to make other changes and transport these. Is there any way to identify the changes made before, other than manually comparing with Prod and removing one by one.
    Is there any table which has change version or some other info.
    Please let us know.
    Thanks In Advance
    Aparna

    Hi Aparna,
    Not sure about transformations, but you can get for the DSOs by a roundabout technique. In your DEV box, go into SE11 and open up the active data table of the DSO.
    Then, follow the menu path Utilities --> Versions --> Version Management. A new screen will open up, and at the top there will be a button called Remote Comparison. Click it, and then enter your production system's ID in the Target Sys field.
    It will then show you a list of differences between the production and the development DSOs. This should avoid the manual comparison bit for all the InfoObjects, though you'll still have to check manually for stuff like Nav Attribs, DSO properties etc.
    Regards,
    Suhas

  • Report for the changes made in Purchase Order

    Hi Friends,
    In my location, changes are made to the purchase orders as and when required. Is there any report which shows the changes made to the Purchase Orders?? I am aware of the Item changes option in the Purchase Order.
    Thanks in advance..
    Regards,
    Phani

    Hi,
    You have to develope an own ABAP report for this, based on the change tables CDHDR and CDPOS
    CDHDR - Header Change
    CDPOS - Item Change
    EREV - Version Change
    Check the link
    Purchase order change log
    Regards
    KK
    Edited by: Kishore Kumar Galla on Apr 5, 2010 1:16 PM

  • Want to know how the changes made in the sap ui5 using NWDS

    Hi Everyone,
    Kindly tell me the way to effect the changes made in the application developed in sap ui5 using NWDS. Because after changing something the effect is not comming to the output.
    Kindly help in this matter.
    Regards,
    Soumya

    Hi Chandra,
    Thanks for your reply.
    I am using SAP AS Java of NWDS 7.3 to deploy the application developed in SAP UI5. Below is the sceen shot of that,
    But after deploying if I change any portion that is not reflecting.
    Thanks and regards,
    Soumya

  • Is there a way to download an entire shared photo stream to your iOS device from the url?

    I recently dropped my iPhone, resulting in a pretty total breaking of it. Luckily, apply care is awesome and I got my phone replaced the next day. My only issue is that I lost the ~3000 photos I had taken on a recent trip to Japan. These photos were saved on a photo stream that was then shared with others that went on the trip, however. My question is: is there a way to download that entire stream back onto my iPhone? Where I am I do not have internet access a lot of the time, and would like access to those photos all the time, as I would be able to if they were saved on my phone.
    Thanks

    Hello Jmask09,
    Indeed, photos can be downloaded to your iPhone. Videos, however, cannot be downloaded to your device.
    Can photos and videos be saved or downloaded from a shared album?
    Yes. After photos are shared, anyone who can view the shared album can download and keep them permanently. Videos can only be downloaded to a Mac or PC. On an iOS device, videos are streamed from iCloud and can't be downloaded.
    On a compatible iOS device, you can save photos to your Photos tab or Camera Roll.
    iCloud Photo Sharing FAQ
    http://support.apple.com/en-us/HT202786
    Cheers,
    Allen

  • When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

    When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

    I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
    If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
    Please continue reading about bookmarks and some related extensions at
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
    * http://dmcritchie.mvps.org/firefox/kws.htm
    If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

  • I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the crop

    I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the cropped image?

    Are you copying the cropped images directly from Aperture's Browser window and then pasting into your family tree?
    It would be safer to export the cropped faces as new image files to a folder on your disk, and then drag them from there to the "Family Tree" window.
    To export select the cropped image versions in Aperture's browser and use the command "File > Export > Version". Select a suitable export preset from the pop-up menu, for example "Jpeg fit into ..." and select a folder to export to.
    Regards
    Léonie

  • Is there a way to import your entire music library from an iPod classic into iTunes on  my PC?  PC was wiped out and my iPod is the only complete library copy I have.

    My PC hard drive was wiped out and I am rebuilding my Windows 7 system.  The only complete library I have of my music is located on my iPod classic.  Is there a way to import the library from my iPod into a  new iTunes library on my PC?  I was told if I connect my iPod to the PC, ITunes will try to sync with the iPod and wipe out the library on the iPod.

    Here is a User Tip from fellow Support Community member turingtest2:
    TT2's iOS device to build iTunes library
    Cheers,
    GB

  • Is there any  way to Mask the Name when  a select statement is issued?

    Dear all,
    Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
    e.g if Name: CHIEV SONG MEE
    If user issue a statment select * from customers;
    The Result Should come something Like this:
    Name
    CHXXV SXNG MXX
    Thank You

    user3029023 wrote:
    but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
    For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
    Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
    If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
    No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
    It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

Maybe you are looking for