Is there a way to set pixels at 20ppi?

I'm using AI to produce tactile graphics [for the blind] on a 20dpi dot-matrix embosser. With so few available dots, aligning elements with the pixels is essential for consistent lines. I know how to set up a new doc for pixels, align with pixels, preview pixels etc,, but the largest option seems to be 72ppi. Is it possible to adjust this somehow? Or maybe someone has another way to deal with this problem?
Thanks!

Don't think you can go any lower than that in any normal design program as there always needs to be a common base reference for all internal calculations like image resizing, font rasterization etc. and traditioanlly it has always been assumed to be 72 DPI. Still, I don't think that it is a problem. Any such stuff no doubt would be handled by the printer driver of the device, meaning it would reinterpret your 72 DPI graphic as 20 DPI and map each "pixel" 1:1. You may just need to design at smaller absolute dimensions...
Mylenium

Similar Messages

Is there a way to set pixel aspect ratio for a project?

This is related to another post I made about using iShowU HD, a screen capture program (for screen casts). On their support page, they show example settings for FCP, but not for FCP X. I was wondering if someone could take a look at that page and decypher that for FCP X. One thing the specify for FCP is to set the pixel aspect ratio to "square pixels", as well as some other things. Also, is it good to use 30 fps?
This is the support page:
http://help.shinywhitebox.com/workflow/final_cut/
Thanks

Set capture size:
Set output video:
Set frame rate:
Set capture options:
Set video and audio format:
Set up the FCP X project:
1080p HD / ProRes 422 / 48kHz...

Is there a way to set markers at the clipping points?

Hi
is there a way to set markers at the clipping points?
thanks

Don't think you can go any lower than that in any normal design program as there always needs to be a common base reference for all internal calculations like image resizing, font rasterization etc. and traditioanlly it has always been assumed to be 72 DPI. Still, I don't think that it is a problem. Any such stuff no doubt would be handled by the printer driver of the device, meaning it would reinterpret your 72 DPI graphic as 20 DPI and map each "pixel" 1:1. You may just need to design at smaller absolute dimensions...
Mylenium

My husband and I are using the same computer. He has a ton of songs in iTunes that I don't want...but when I sync my iPod I get all of his songs too. Is there a way of setting up another ITunes account without having to untick all of the ton songs iTunes

My husband has a ton of songs in iTunes that I don't want on my iPod nano. Is there a way to set up a separate account on the same computer in iTunes? Do I have to un-tick all of his songs (would take forever!! And then he would have to tick them again)....when we sync our iPods?

No. Its not possible.
Alternatively, create another user account in your computer. Install iTunes in that account with the library you wish to sync.

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?

My wife and I share an iTunes account. Is there any way to set up a seperate one for her to sync her phone contacts, iCloud and music to without having to purchase all her music again and then share going forward?
It would be so much easier having seperate accounts but we have hundreds of her purchased songs on my account and she would need to be able to access these from her account. Possible?
Also, if we bought a song in future we would want to be able to both have access to it.
Alternatively, what is the easy way to sync two distinctly different contact lists to one iTunes account?
Thank you in advance.

FYI: iTunes account (used to make purchases) is not the same as iTunes library (iTunes on your computer with music, movies, etc.).
ecbclb wrote:
Will we have to create a seperate account for her, or can we all have the same one?
You can but you will not be able to limit what she syncs.
I would like to avoid 'checking' and 'unchecking' individual songs every time one of us tries to synch our ipods to the library.
I don't recommend using (only) the checkmarks to select what to sync.
Each of you can create your own playlists then sync only those playlists.
Then add/delete from your own playlists to change iPod content.
The only time I uncheck items is if I rarely/never want to sync them to anything, such as Christmas music or old audiobooks.
I suggest you each have your own computer login account. Then everyone has their own contacts, calendars, and everything else.
You and your husband can share an iTunes library and let your daughter have her own.

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way of setting up a sub account for her, or do I have to set of husband playlists and a separate set of wife playlists?

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way to set up a sub account for her, or do I have to set up a set of husband playlists and a set of wife playlists?

Sorry, but that's not possible.
You can share iTunes libraries on a network > iTunes: Setting up Home Sharing on your computer

Is there a way to set wireless network priority on iphone? If not, there should be!

Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone knows to always connect to the 5GHz signal if available, rather than trying to connect to the 2.4GHz signal which is on the other side of the house...

By default, the iPhone will prioritize Wi-Fi over cellular for data and when doing Wi-Fi, will latch on to the strongest signal it can associate (latch on) to. But all that is automatic, there's no evident control for manual adjustments. Other than deleting the Wi-Fi networks you don't like.

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So we don't want to share contacts or anything else, just photos... Thanks in advance

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So, we don't want to share contacts or anything else, just photos... Thanks in advance

If you turned off Contacts wouldnt that mean that the Contacts would no longer be backed up to iCloud as well? That would make it a pain when upgrading a phone to not easily pull contacts back down.

I am trying to use Find My Phone for people to follow me on the NYC Marathon next week. Is there a way to set up a temporary User ID and Password to give out to people for this purpose? I would obviously want to delete that log in info after the race.

I would like to use Find My Phone for friends and family to follow me during the NYC Marathon next week. Is there a way to set up or temporarily change my User ID and Password for this purpose?

New York Runners has an app that is specially designed to do exactly that. It's (or will be) available in the App Store.
http://www.nytimes.com/2011/10/27/sports/for-new-york-city-marathons-fans-a-cell phone-app-to-keep-in-touch.html?ref=technology
You might also look at apps like RunMeter. It will let you send updates by email, Facebook or Twitter. Glympse is another app that, though not designed specifically for runners, might also be useful.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Is there a way of setting up one more than one export preset to a funcion key?

Hi
is there a way of setting up Lightroom to export images in using more than one export preset at one time? When I have edited my photos I very often want to create a full res JPEG to upload to Zenfolio with no watermark, a medium res JPEG to go to Flickr and a 1500px image with a watermark for Facebook (I normally upload these last). I'm hoping Lightroom would also have a an option to set Function keys to trigger export presets for example.
I'd like to be able to stack export presets to help with my workflow.
Thanks
Jon

robcole.com - ExportManager
does what you want, as long as you don't need post-process actions in your export preset(s).
plugin | free | I wrote it..

Is there a way to set the iPhone to have a black screen with white text?

I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?

I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8

Is there a way to set pixels at 20ppi?

Similar Messages

Maybe you are looking for