Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence.  I'm having to adjust the easing of each keyframe individually. 
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor?  It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Similar Messages

  • Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

    Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
    I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
    Thanks!

    Hi John,
    Have you tried repairing Reader and checked?
    Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
    Regards,
    Anoop

  • Is there a way to set the default length of appointments/events to 1 hour?

    Is there a way to set the default length of appointments/events to 1 hour?

    No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
    http://www.adobe.com/go/wish

  • Is there any way to set the default for *.doc document so that Pages opens them automatically?

    I have a number of Ms Word documents because I used to have Word for Mac before the last OS release.  Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
    Now Pages will open these files.  Is there any way to change the default for *.doc files so that a double-click will open them in Pages? 
    (Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

    Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
    Walt

  • Is there a way to set the default reminder to "two days"?

    When I switched from iCal to iCloud Calendar I lost the ability to have all reminders set to 2 days!  Is there a way to set this as the default for iCloud Calendar?

    That's only possible with events.

  • Is there a way to set the default media kind in itunes

    I hate having to change every movie I make and add to itunes from home video to movie.  Does anyone know a way to change the default media type.  There must be a way using terminal.

    I don't know about making it the default.  You need some kind of mp4 atom editor and if you got it to do it via Terminal as default then you wouldn't be asking here, you'd be answering all the programming question on the forum.   It's probably coded in the iTunes application itself and inaccessible.  There's a bunch of editors out there.  I could name a few but I run a 12 year old computer and a 5 generation old operating system so they probably no longer exist for you.  I don't know that it would be any easier than doing it in iTunes unless you needed to convert batches of files at a time.

  • Is there a way to set the default view for the App Store to only show Apps for iPads when the Store is launched?

    I'm a new iPad owner and would like to set the default view for myself to show only Apps for the iPad when I launch the the App Store app. Showing apps for iPhone seems a waste of real estate for me and time spent searching for a particular app since I do not own an iPhone.
    Thanks for any assist. :-)

    Hi ..
    That's not possible as yet but you can provide feedback to Apple here.

  • Is there a way to set the default Initial View to Bookmarks Panel and Page on word documents that I save as PDF?

    When I save my word 2013 documents as Adobe PDF I have to open the PDF up, go to File>Properties>Initial View>Navigation Tab and then set the initial view as Bookmark Panel and Page; it gets pretty tedious.
    I use Save as Adobe PDF rather than Print to Adobe PDF Printer because I like being able to have the security settings automatically set.
    I just want to be able to save my word document as Adobe PDF with the initial view already set as Bookmark Panel and Page, and with security, so I can send it out immediately.
    Is this possible?
    Thank you.

    Use the Firefox Android Addon - Phony
    *https://addons.mozilla.org/en-US/android/addon/phony
    for more
    *https://addons.mozilla.org/en-US/android/

  • Is there any way to specify the default version of LabVIEW?

    I have a sinking feeling that the answer to this question is "no."  With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here.  When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8.  I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.

    eaolson wrote:
    I have a sinking
    feeling that the answer to this question is "no."  With more than
    one version installed, is there any way to set the default LabVIEW
    version for opening a VI? I have both 7.1 and 8 installed, and usually
    only use 8 to open an example or look at something posted here. 
    When I do that, it resets all the OS hooks so that the default action
    for opening a VI is to open it in version 8.  I've even gone so
    far as to create actions to open files in 7.1 and 8, but it always
    resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.
    Add
    in the LabVIEW.ini file of those versions you do not want to rewrite
    the registry on startup to point to themselves for VI files, the
    following:
    RegisterExtensions=False
    Of course the VersionChooser utility mentioned earlier is even more convinient.
    Rolf Kalbermatter
    Message Edited by rolfk on 06-28-2006 08:21 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

    When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
    Is there a way to set the default Source Range to something besides Sequence In/Out?
    My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
    I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap". 
    For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
    Now here's that same in/out in "Lighter Appearance":
    Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
    Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
    So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
    Thank you!

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

  • Is there a way to set a default solution .runsettings file in VS2013?

    This is a question my coworker asked over on StackOverflow
    [here], but hasn't received a single comment or answer. Thought I'd repost it here since I know the VS guys are more likely to see it here...
    I'm using VS2013 with the built-in unit test framework. I've created a .runsettings file that sits in the Solution Items folder. When I select Test -> Test Settings -> Select Test Settings File, I am able to choose my .runsettings file and it works
    as expected.
    When I exit out of VS2013 and then re-load the project, I have to re-select the .runsettings file. Is there any way to set the default .runsettings file at solution level so it gets persisted?

    Hi,
    I can’t get your issue on my side(VS2012 Update 4 machine and VS2013 Update 1 RC machine). If you are using VS2012, please upgrade it to VS2012 Update 4. If you are using VS2013, please upgrade it to VS2013 Update 1 RC.
    When I restart VS and re-load the project, the .runsettings file is still selected
    with the Select Test Settings File menu option and .runsettings file is still used when I run the unit test.
    I doubt that there is anything wrong with your VS. As I mentioned above, please reset your VS settings through Tools->Import and Export settings->Reset all settings…
    If no help, try some other devenv commands to fix:
    1.devenv.exe  /safemode
    2.devenv.exe  /resetskippkgs
    3.devenv.exe  /installvstemplates
    4.devenv.exe  /resetuserdata 
    devenv.exe can be located under your VSlocation/Common7/IDE
    What your need is to put it to run prompt and add commands to it.
    If the issue still exists, please repair or reinstall your VS.
    Meanwhie, if you have some anti-virus software running when you work with VS, please close them to check the reuslt.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Acrobat or Reader: Is there a way to set the print scaling default at the application level?

    Is there a way to set the Page/Print Scaling to a default at the application level? For Acrobat and Reader?
    Thanks,

    Often asked, but that feature retains the last used local setting.
    You can however, change the default for Documents, individually, in their Properties > Advanced tab

  • Apple Mail, is there a way to change the default time-out?

    This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
    I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
    Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
    I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
    Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
    Things I have tried:
    I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
    I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
    Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
    Any help would be appreciated.
    Kraig

    I already thought of that one.  I deleted my account from there.  But it didn't default to the other one.  It just told me I needed to add an account.  Thanks tho

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

    # Question
    In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

    If you need to adjust the font size on websites then look at:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 10.0 r45
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

Maybe you are looking for

  • FTP adapter ESB

    Ok im trying to use an FTP adapter to grab a file from my unix server and bring to my local computer. I setup the correct connection to my unix server in the oc4j file i simply put an ftp adapter out on my workspace and i define that first adapter as

  • Firefox bookmarks toolbar doesn't show

    Firefox's bookmarks toolbar doesn't show properly for me on start-up of FF and opening any new FF windows: The top image is what my Firefox (3.0) looks like when I start it, the bottom image is what it should look like. However the bookmarks toolbar

  • Servlet and Interface

    Hi, Why would I have to instantiate a object for interface to access and execute it's method from Servlet? For ex: Servlet A refers to Interface B which has method bb. The implementation class is C. Inside Serverlet A, if I refer to (refer to below l

  • Digital camera movies? iPhoto/iTunes?

    Hi I have many small movies from my digital camera which are stored in iPhoto. I want them to be synced to AppleTV. So far the only solution I see is to export them manually for AppleTV and import them into iTunes. Is there an easier way? why does Ap

  • My iPhone 3GS battery lasts about 30 minutes

    What can I do about my iPhone GS battery?  I went to Apple store & they told me to remove & then update the software.  I did.  Now it's even worse!  Help!