Is there a way to set wireless network priority on iphone? If not, there should be!

Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone knows to always connect to the 5GHz signal if available, rather than trying to connect to the 2.4GHz signal which is on the other side of the house...

By default, the iPhone will prioritize Wi-Fi over cellular for data and when doing Wi-Fi, will latch on to the strongest signal it can associate (latch on) to. But all that is automatic, there's no evident control for manual adjustments. Other than deleting the Wi-Fi networks you don't like.

Similar Messages

Is there any way to set auot text replay in iPhone?

is there any way to set auot text replay in iPhone?

No, because you can't set a columns view default.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Is there a way to take a picture with my iPhone and NOT hvae it go into my photostream?

I take a lot of pictures that I use for reference, and then throw away later. I would like to not have to throw them away from my photostream also. Is there a way to tell the iphone not to send to the photostream?

If you have more than 1 mac on a local network there... you can access firewire drives attached to other Macs if they are first set up to "allow windows guests" under system preferences>SharePoints. Windows 7 conveniently sees these "other macs" and their windows-friendly drives in windows Network view. My FW drives are easy to read and write too even though the are formatted Extended (Journaled).
I'm not sure if there is any downside to this method... such as long file paths becoming broken down the road in back up situations. I have used these Mac drives in a network setting for awhile without consequence.
Mike

Is there hardware for the car to tell me my iPhone is not there?

I seem to leave the house and forget my iPhone. Is there any blue tooth hardware I can keep in my car that will tell me I do not have my iPhone?

There's this device which claims to do that:
http://www.amazon.com/Bringrr-Bluetooth-based-reminder-feature-USB-chargeable/dp /B004AU8ZLM
I know nothing about it myself, though the user reviews look positive.
Regards.

Is there a way to set my camera on my iPhone 5 to take a higher resolution picture

How can I take a higher resolution pic on my iPhone 5? Please help and it seems like when I upload my pic to the computer or share via email or other media, the resolution is really low. Please help.

The iPhone always takes photos at its highest resolution. If you share by anything other than copying to your computer via USB or sending via email the resolution will be reduced by the transfer medium. Email gives you a choice of resolutions, however, many email providers will not accept photos at the camera's highest resolution.
It's also possible that you don't understand how resolution is measured. Image file size has very little to do with image resolution.

Is there any way to recover data previously stored on iPhone but not backed up on iCloud?

I just accidentally restored data through iCloud from my old iPhone to new iPhone and lost all data previously stored on the new phone. Is it possible to recover the lost data at all?

Have you backed up the new phone's data anywhere? iCloud or iTunes? If not, then you are stuck with the restore you put on it....
Sorry,
GB

Is there any way to set a timer for particular playlist?

i would like to listen to a sleep playslist everynight without getting up to turn it on. is there any way to set it in advance?

this is not the problem. i know how to open iTunes when it starts up and to schedule the computer to shut down. what i want to is at 8 pm close all applications except iTunes, put the display to sleep and at 9 pm start playing a sleep playlist. i have been told many times not to look at the computer an hour before bed and i so i want to avoid having to look at it to start my go to sleep playlist.
i have looked at a number of programs but i don’t see one that does this yet.

Are there any way to recover the deleted images form iPhone 4

hello guy's
are there any way to recover the deleted images form iPhone 4
note : i haven't make any copy of the photo in my pc so i relay need for them
plz help

The Camera Roll is for temporary storage as with any other digital camera. Although photos in the Camera Roll are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, photos in the Camera Roll can and should be imported by your computer ASAP. If you didn't sync your iPhone with iTunes since these photos were captured by your iPhone and the photos in the Camera Roll weren't imported by your computer, the photos are gone.
Depending on how wealthy you are, you can contact a data recovery service to see if they can recover deleted photos from an iPhone's flash drive, but you will pay an arm and a leg for this. Such a data recovery service is not cheap and with no guarantee the data will be recoverable.

RE: Is there a way to have 2 network cards on the samemachine

Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way of setting up a sub account for her, or do I have to set of husband playlists and a separate set of wife playlists?

I have an iTunes account with my own music library. My wife wants to have her own music library. Is there a way to set up a sub account for her, or do I have to set up a set of husband playlists and a set of wife playlists?

Sorry, but that's not possible.
You can share iTunes libraries on a network > iTunes: Setting up Home Sharing on your computer

Is there a way to have 2 network cards on the samemachine

Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2 ip
addresses, and the connection between the two is the unix box and only the
unix box. I have a pc connected to the 2nd network card and I want it to
connect to the nameserver that is listening on a well known port on the
first network card. We don't want to turn IP forwarding between the two
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env 1?
If the first scenario is the case and you are connecting to the nodemgr for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name it
will register using the IP for the primary network card associated with the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to get
anything other than the primary card.
I would also suggest that you do the following. After everything is up and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not havea
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds witha
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple
ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to set firefox so it only allows access to only one website / (ip address).

Is there a way to set firefox so it only allows access to only one website / (ip address) and block traffic from everything else (the entire web) other than the one site I want to allow? The site I want to allow is a corporate web application that will only work in firefox. We as a business run a windows server and all client desktops run Internet Explorer with security setting controlled by group policy. We have already locked down the security setting in firefox so users can’t bypass the proxy server settings.

I have a proxy server set up (Symantec.cloud). Fire fox is “locked” so users would find it difficult to bypass it.
I have a file: '''local-settings.js '''
This is located in: C:\Program Files (x86)\Mozilla Firefox\defaults\pref
The content of this file is:
''pref("general.config.obscure_value", 0); // only needed if you do not want to obscure the content with ROT-13
pref("general.config.filename", "mozilla.cfg");''
I also have the file: called: '''mozilla.cfg'''
This is located: C:\Program Files (x86)\Mozilla Firefox
The contents of this file is:
lockPref("network.proxy.type", 5);
All that is working fine, users can’t easily change the connection settings.
So all that is good and works…
What I would also like to do is set firefox so access is limited to 1 IP address and nothing else is allowed (the whole internet is blocked, except this one IP address).
You suggest using a PAC file - I was unsure how I would use a PAC file, (I have never written one) and do not understand how I would implement one? Please help.

JDBC & setQueryTimeout - or is there another way to set query timeout?

I am trying to set query timeout for TimesTen using jdbc library. But it seems like TimesTen jdbc library does not support setQueryTimeOut. Is there a way to set it without having to set it statically in the DNS?
I tried to set the SqlQueryTimeout in the connection string but it doesn't work either:
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=bleh;TCP_PORT=17013;TTC_Server_DSN=blah;TTC_Timeout=0;SqlQueryTimeout=5;");
Thanks for your help!

Thanks for replying. I don't know have good knowledge on Cache Connect. I will have to read on that first.
It seems like TimesTen does not support jdbc setQueryTimeout. Calling this method on TimesTen jdbc library will return false: supportsQueryTimeout().
I created a test class for testing the SqlQueryTimeout. I set the TTC_Timeout to 400 seconds and SqlQueryTimeOut to 5 seconds. So after 5 seconds it should time out.
The way I test it is by putting a break point before executing the query, do a route add DBServer to an un-connectible gateway to simulate the network delay/connection problem and then continue after I added the route.
After executing the query, instead of timing out after 5 second, it will wait for a few minutes before timing out.
The code for testing the timeout is as follow:
public class TTTest {
     public static void main(String[] args) throws ClassNotFoundException {
     Class.forName("com.timesten.jdbc.TimesTenDriver");
     try {
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=server;TCP_PORT=17013;TTC_Server_DSN=server_dns;"
     + "TTC_Timeout=400;SqlQueryTimeout=5;");
     System.out.println(connection.getClass().getName());
     Statement stmt = connection.createStatement();
     //com.timesten.jdbc.JdbcOdbcStatement stmt = (JdbcOdbcStatement)connection.createStatement();
     System.out.println(stmt.getClass().getName());
     System.out.println("Query started " + new Date());
// Pause here, put a route add and continue
     ResultSet rs = stmt.executeQuery("select count(*) from mse");
     rs.next();
     System.out.println("there are " + rs.getInt(1) + " rows");
     rs.close();
     stmt.close();
     connection.close();
     } catch (Exception x) {
     x.printStackTrace(System.err);
     System.err.println(new Date());
}

Is there any way to set read timeout on JDBC connection?

When the network connectivity between the machine
where Database is running and where the application is running breaks,
the query executed using the old connection handle is not timing out.
Is there any way to set read timeout on JDBC connection. ?
FYI, Oracle JDBC thin Driver is used in our application.

Set the tuning parameters with Embedded OC4J Server Preferences>Current Workspace>Data Sources>jdev-connection-DBConnection1 node.
Select the Tuning tab.
The Inactivity Timeout parameter specifies the number of secs of inactivity after which a connection gets disconnected.

Is there a way to set wireless network priority on iphone? If not, there should be!

Similar Messages

Maybe you are looking for