Is there a way to test for network connectivity (and a way to simulate it)
Is there a way to test for network connectivity, which API to look into? Also, is there a way to test that code in the simulator, that is, to turn off the network in the simulator.
Thanks
A peek in the docs would help- there is a TON of information there.
You might also try the Reachability sample app for ideas:
http://developer.apple.com/iphone/library/samplecode/Reachability/index.html
Similar Messages
-
What is the best way to test for collisions between objects?
I am in the process of developing my first game, my first decent game that is. I understand how to develop the background and tileset for the game, but have yet to figure out an effective way of testing for collisions. As in you try to move the character into a wall, or another object on the level.
If I divide the level into tiles, it won't be to hard, but I am thinking I want to have the hero be able to move all over the place, not just from square to square.
Any suggestions or ideas will be greatly appreciatedIf I divide the level into tiles, it won't be to hard,
but I am thinking I want to have the hero be able to
move all over the place, not just from square to
square.Err...
So if the hero is not on a square, the hero is not on a tile and consequently is not on a visible aspect of the game world?
I suspect that you wanted the hero to be able to move in any direction, not just the standard cardinal directions.
If you're using tiles to represent the game world, then the solution is simple - check to see if there's anything "solid" already on the target tile. If there is, abort the move and report it as a collision. If there isn't, permit the move.
It's only when you have a tile-less world that you actually have to determine if the leading edge of your hero crosses the boundary of an item (or border) that he shouldn't be allowed to cross. Doing so is complicated enough that I would simply suggest that you search the forum for third party collision detection packages that you can borrow. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
PRCD-1135 : There is no listener defined for network
When trying to add service to the cluster it giving error.
{oracle}107: srvctl add service -d ORCL -s abc11 -r ORCL1,ORCL2,ORCL3 -P BASIC -y AUTOMATIC -e SELECT -m BASIC -z 3 -w 1
PRCD-1135 : There is no listener defined for network 10.16.144.0/255.255.252.0 to be used by service abc11
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node3941119 wrote:
When trying to add service to the cluster it giving error.
{oracle}107: srvctl add service -d ORCL -s abc11 -r ORCL1,ORCL2,ORCL3 -P BASIC -y AUTOMATIC -e SELECT -m BASIC -z 3 -w 1
PRCD-1135 : There is no listener defined for network 10.16.144.0/255.255.252.0 to be used by service abc11
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node3srvctl status LISTENER
srvctl config LISTENER
srvctl config SCAN
srvctl config SCAN_LISTENER
There is still a regular LISTENER in addition to the SCAN_LISTENER
also how do you have remote/local_listener configured?
Please review: http://www.oracle.com/technetwork/products/clustering/overview/scan-129069.pdf -
Is there an Apple Hardware Test for PowerPC G5?
Is there an Apple Hardware Test for PowerPC G5? Is it on disc, downloadable from Apple?
You can call Apple support to find out if they still have original OS X disks available for your system. Apple has been letting the disk inventory run out, so they may or may not still have them. Last I recall they were charging around $60 for the set.
If the disks are not available, TechTool Pro would be the commercially available hardware test tool that is available: http://www.micromat.com/index.php?option=com_frontpage&Itemid=104 -
Looking for best way to test for a program
I like test path better. My problem is through all the different versions of office they cant all install to the same directory. Research time.
I'm writing a script that will automatically install Outlook 2010 if Office 2013, 2010, 2007, or 2003 are not installed. It's part of a script I already have each tech has to run locally due to management decisions(that I have no control over). Right now I prompt the tech if they want to install it. Then test for the installer and install it.
PowershellDo{$outlook = read-host "Would you like to install Outlook 2010? y/n" IF ($outlook -eq "y") { If (Test-Path -Path C:\Update\outlook2010) { saps -filepath C:\update\outlook2010\setup.exe -wait } Else { Write-host "Outlook is not in the update folder!" -ForegroundColor Red } }ElseIF ($outlook -eq "n") { Write-Host "Please make sure there is an email client." -ForegroundColor Yellow }}While ('y','n' -notcontains $outlook)What I would like to do is remove the prompt as it's a volume license...
This topic first appeared in the Spiceworks Community -
Can I create a custom setup test for Adobe Connect Pro?
I was wondering if there was a way to create a custom setup test for Adobe Connect Pro? We are using Adobe Connect to teach some web courses and we need them to complete the Adobe Connect test as well as some other software setup tests. Due to the fact that we are using a company wide account for Adobe Connect the "Send Results" button on the setup test doesn't reach me (I am the one in charge of making sure all students have taken all the setup tests). Typically we have them take a test and then return back to the main 'test' page where they select whether or not the test worked.
In the end I figure I have two options:
1. Change the test so that it emails the responses to the email of my choice, i.e. a custom version of the setup test. (Not sure if this is possible as we use a company account)
2. Completely remove the "Send Results" button from setup test and just rely on the student manually entering whether the test worked or not.
Please help!The timecode effect can only show whole frames so there is not a setting for 23.97. I'm not at my editor at the moment, is there an option for 'drop frame' in the timecode settings, this is how timecode is displayed for non whole number frame rates.
-
im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?
Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur. -
On my Ipad Revel is giving me the following error:
"there was an error contacting the server. please check your network connection and try again."
The Ipad is connectd to the internet and it's the only app not working. This has been going on for 6+ months.I'm having the same problem on an iPhone and an iPad, while another iPhone and iPad are working perfectly, all on the same account. The Mac app is also working fine. I've reinstalled the apps on the iDevices and checked to make sure the region is set (it is) and all apps are up to date. What seems to happen is the app syncs perfectly, the blue progress bar shows the sync is complete, but the app continues to try to snyc, periodically flashing the connection error. If I quit or force quit the app or even force a restart of iOS 7.04, then open Revel, it immediately begins to sync, updates with no problem, but the sync icon continues to spin until I quit. Each time I activate the iDevice, I'm greeted by a message from Revel that the sync was interrupted. I open the app and it's back to the endless syncing and error messages.
Update: The problem continues. Message was edited by: lumierefl -
Is there a setting that allows for simultaneous downloading and watching of a rental movie on ATV?
Apple TV has no storage, it is caching the movie and needs to load a portion before playback starts. The time it takes is dependent on your network.
What is your current connection via speedtest.net?
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet -
in use:
vRO 5.1
eclipse 3.7.2
vRo plug-sdk 5.1
steps:
1.create a plug-in project from samples(choose solar system)
2.find the dar package and upload it by vRo configuration
3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
problem:
Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default
How to solve it??
Thanks so much!!There was problem from crm side...its working now..
-
What is the easiest way to check for internet connection in C#?
Hi!
I searched a lot but I didn't get my answer. I'm looking for the easiest way to check for internet connection. Can you help me?
Thanks a lot.Hi Pouya Ebrahimzadeh,
I suggest you could connect a site to check if it can be opened.
Public Shared Function CheckForInternetConnection() As Boolean
Try
Using client = New WebClient()
Using stream = client.OpenRead("https://msdn.microsoft.com/")
Return True
End Using
End Using
Catch
Return False
End Try
End Function
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating. Ps my friends here has such a problem too
Ukraine is there. It's been there for a while. I even see it now.
-
Revision: 13640
Revision: 13640
Author: [email protected]
Date: 2010-01-19 15:07:11 -0800 (Tue, 19 Jan 2010)
Log Message:
First checkin of unit tests for FLV tags and their parser
Modified Paths:
osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
Added Paths:
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/FLVTestHelper.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVHeader.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagAudio.as
Property Changed:
osmf/trunk/framework/OSMFTest/org/osmf/Thanks for posting this!
I would only mention that your definition is incomplete for this -
Contextual selector A type of Style Sheet Selector that
and that it's most often referred to now as a Descendent selector, not a contextual selector. It's basically the same as the Compound selector that you have already defined.... -
when i try to sign on to to I message I get the error message. IMESsage activation, could not sign in. Please check your network connection and try again. I have a network connection and can access the internet. what do i need to do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
Maybe you are looking for
-
No Movie in File Error - hard drive issues
I am editing an extensive project on FCP7 on a 2011 iMac with 3.4GHz i7 and 8GB RAM running OSX Lion 10.7.5. I am using two G-Raid Lacie external drives (4TB each) that are connected via firewire. Editing has been smooth for many months until...today
-
Acrobat 10 won't start anymore
Love how you spend thousands to get the latest software from Adobe, and then when you simply need to open a PDF file right before a presentation, the application won't open. Found one discussion that advises to uninstall and the reinstall. Seriously
-
Insert values to one table based on a value inserted into another table
Hi, I've got a form based off a report which creates a new project. I've added an additional process to this form to insert four new values into another table as soon as the new project is created and the PK for that project is generated. This was wo
-
I use my Macbook as a part of a sound system and after I hook my Macbook in using the headphone jack it won't let me use the internal speakers after I unhook it. I went into my sound settings, and my only output option is digital out. Help seems to g
-
CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?