Is there a way to use 'GET PERNR' without the selection screens?

I would like to use the GET PERNR event in a batch program without using the default selection screens.  I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period.  I've tried removing the screen number from the attributes screen, but still get these options.  Is this possible?

hi Kiran,
report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
this is from SAPHelp: "Report Category
Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
hope this helps
ec

Similar Messages

  • Is there any way I can get rid of the noise my iPod makes when I plug it in to charge without turning the volume of the whole IPod (4th Generation) down?

    I have a 4th generation IPod touch. Today I downloaded the new iOS 6.0.1 and I have a question. Is there any way I can get rid of the noise when I plug it in to charge? I had it set that way before, and I can't seem to figure out how I did it. I found when I turned down the over all volume it gets rid of it, but I don't want to change the over all volume. Thanks so much for you help and Happy Holidays.

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Is there a way to use old iphones without a sim card

    is there a way to use old iphones without a sim card?

    Yes but if it needs activating first then a Sim card must be inserted just during the activation process
    and can then be removed
    http://support.apple.com/kb/ht3406

  • Is there a way to use business objects in the program or function module?

    Hi Experts,
    Is there a way to use business objects in the program or function module.
    Thanks in Advance.
    Naval bhatt

    Hi Naval,
    Ofcourse you can use business objects in your programms/ methods.
    You can use function modules or macros (available from include <cntn01>) for using business objects in your application.
    refere following two links for startup information
    http://www.sap-img.com/abap/reading-attribute-of-a-business-object-in-abap.htm
    http://www.jt77.com/business-warehouse/work-flow-12619.html
    Regards,
    Abhijit

  • Is there a way of using remoteupdatemanager to install the Digital Publishing suite to Adobe inDesign?

    Is there a way of using remoteupdatemanager to install the Digital Publishing suite to Adobe inDesign, if not how do I install it to Macs running Adobe CC 2014? I need to do this remotely and silently using ARD to over 100 Macs.

    It's alo what mine looks like as well because I've not added anything At first I didn't know and no one would tell me. Then I just go used Tools menu. It far more complex to learn if you go to it Cold Turkey from using Menu bars which are vastly easier. It’s a shock to your system. But you learn to use tools menu evn though it takes far more time. You waste time clicking heading to find sub topics and sometimes items that should be grouped together are spread all over.  But, Hey Change is supposed to be good whether we want it or not.

  • I received a goggle play gift card for Christmas.  Is there a way to use this card in the ITune store ?  Or is there a way to convert the google card credit into Itune credit ?

    I received a google play gift card for Christmas.  Is there a way to use this card in the App store or Itune store ?  Or is there a way to convert the google credit into itune credit ?

    No - sorry.
    GB

  • Is there a way to have hardware acceleration without the text font change? + Eye straining firefox!

    Is there a way to have hardware acceleration without the text font change? I remember there was a way to go into settings before and getting hardware acceleration to work without the font change. Unfortunately I lost ALL my previous setting when uninstalling the beta ver Nightly and clicking delete settings :(.
    Also, I fixed a problem before where firefox was visually eye straining to me, I think it was some settings in anti-alias tuner, but I cant seem to find the right settings that puts less strain on my eyes, anyone know? Thanks ahead. Currently using FF7.

    Try to toggle some Boolean gfx.font_rendering prefs on the about:config page to disable some features.<br />
    Filter: gfx
    Others to try:
    * set gfx.direct2d.disabled to true to disable Direct2D
    *Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/

  • HT201263 My computer will not let me download the latest itunes, is there a way to restore ,y ipad2 without the latest itunes version?

    my computer will not let me download the latest itunes, is there a way to restore my ipad2 without the lastest itunes version?

    You don't provide enough info to answer.
    What computer model and what operating system?
    What version of iTunes is currently installed?
     Cheers, Tom

  • Apple remote not working, is there a way to setup Apple TV without the remote

    Apple remote not working, is there a way to setup Apple TV without the remote

    Welcome to the Apple Community Sylvia.
    There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

  • I'm using TestStand/Labview to do a string value test. Is there any way to use a variable in the edit string value test?? This forces you to hard code a string to test against.

    I'm using TestStand 2.0/Labview 6i to do a string value test. Is there any way to use a string variable in the edit string value test instead of an actual string?? This forces you to hard code a string to test against.

    Hi ART,
    You can also use the LimitLoader step to load your string into to step similar to the Numeric Step type.
    There should be an example of this in the Resource Library | TestStand
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Use GET PERNR without any screen default from Logical DB.

    Could anyone help me how to avoid using screen default from logical DB if using GET PERNR?

    Are u saying using this logic below  , im can avoid using GET PERNR?
    TABLES: RP50G,PERNR,PYORGSCREEN,PYTIMESCREEN.
    DATA: IN_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
          WA_RT LIKE PC207 OCCURS 0 WITH HEADER LINE,
          SEQNR LIKE PC261-SEQNR,
          RESULT TYPE PAY99_RESULT.
    DATA: M_START LIKE SY-DATUM,
          M_END LIKE SY-DATUM.
    FORM GET_PAYROLL USING P_PERNR M_START M_END.
    *This FM help us to get the Sequence number used for the
    *employee on the payroll.
      CALL FUNCTION 'CU_READ_RGDIR'
           EXPORTING
                PERSNR          = P_PERNR
           TABLES
                IN_RGDIR        = IN_RGDIR
           EXCEPTIONS
                NO_RECORD_FOUND = 1
                OTHERS          = 2.
    *We read it using two dates, which corresponds to the month *we need
      READ TABLE IN_RGDIR WITH KEY FPBEG = M_START
                                   FPEND = M_END.
      SEQNR = IN_RGDIR-SEQNR.
    *This FM actually reads the payroll and get the information
    *we need.
      CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
           EXPORTING
                CLUSTERID                    = 'XX'
    *In CLUSTERID use the country of your choice
                EMPLOYEENUMBER               = P_PERNR
                SEQUENCENUMBER               = SEQNR
                READ_ONLY_INTERNATIONAL      = 'X'
           CHANGING
                PAYROLL_RESULT               = RESULT
           EXCEPTIONS
                ILLEGAL_ISOCODE_OR_CLUSTERID = 1
                ERROR_GENERATING_IMPORT      = 2
                IMPORT_MISMATCH_ERROR        = 3
                SUBPOOL_DIR_FULL             = 4
                NO_READ_AUTHORITY            = 5
                NO_RECORD_FOUND              = 6
                VERSIONS_DO_NOT_MATCH        = 7
                OTHERS                       = 8.
    *We just need to read the result table.
      LOOP AT RESULT-INTER-RT INTO WA_RT.
        CASE WA_RT-LGART.
          WHEN '9010'.
             MOVE WA_RT-BETRG TO T_ANYTABLE-SOMEPAY.
        ENDCASE.
      ENDLOOP.
    ENDFORM.

  • I have forgotten my password on my ipod touch 4th generation is there a way i can unlock it without the password?

    i hve forgotten my password on my ipod 4th generation is there a way i can unlock it without entering the password?

    Welcome to Apple Communities
    You can't disable FaceTime remotely. If you activated Find my iPhone in the device, go to iCloud and Find my iPhone. You can block or erase your iPod if it's connected to Wi-Fi, but you won't be able to track it

  • HT3986 Is there a way to install my drivers, without the install disc, or a way to get another install disc?

    I have a 27 inch, 2011 Mac. Its running Mountain Lion X, and I want to install Windows 7 via boot camp. I understand without the install disc, my mouse and keyboard won't work (or maybe it's just keyboard, as I have a Cyborg mouse). Without the disc - is there a way to get the required drivers, or a way to get another disc?
    Thanks!

    There is no install disk for Mountain Lion, you download the Windows Support Software using Boot Camp Assistant (as you are creating the partition)
    Backup your machine first, then Read This before you start.

  • Is there any way to use my iphone through the computer?

    Today at work, my phone screen, which was already cracked, got messed up to the point where the screen is getting false touch signals. It is resonating from the top left of the screen and traveling down the fracture and making the phone impossible to use. I can barely open the lock screen, and there is no way to access any of the apps (including the actual call aspect). I want to know if there is a way for me to be able to use my phone through my computer, at least to be able to access my contact list and turn off an alarm I had set for tomorrow which I would prefer not to go off,since I would never be able to actually deactivate it...
    My problem makes it impossible to even shut off the phone, and since I use it as my house phone as well, it would really be amazing of there was some way to work it through the computer. I also am wary about letting the battery run dry because I want to be able to see if people are trying to contact me.
    Any help is appreciated, thanks!

    This is not a feature of the iPhone or iOS.
    Replace the screen or device.

  • Is there a way to use a path as a selection marquee?

    Is there a way to take path, closed, and select everything that falls inside? or crosses it?

    Nope. I've been suggesting that for years as a better interface for both "lasso" selections and cutting paths.
    If Illustrator's Javascript model provided a function for path intersection and "collision", (similar to FlashScript's ability to detect path collisions) scripting such a solution would probably be trivial. But there is no such function provided.
    Such a function could be leveraged for other features, too. For example, imagine integrating it with Symbols. You're drawing a map. You have a Symbol of a tree. You draw a path in the shape of the forest, and issue a command to randomly position any desired number of Instances of the Symbol.within the path. (Compare the speed and ease of that to the tedious and difficult-to-control Symbolism tools.)
    You can do cumbersome workarounds, but so far, any I've come up with proove too sluggish. For example, you could semi-automate this with a combination of Script and Actions:
    1. Draw a path.
    2. Fill it with a Pattern Swatch (or Create Object Mosaic)
    3. Expand the fill (or Ungroup the Object Mosaic)
    4. Replace the resulting Groups (or Object Mosiac paths) with Instances of a Symbol.
    5. Use the Random setting of Transform Each to somewhat "randomize" the placements.
    But even that does not guarantee intersection with the original path.
    I have used similar routines to script the creation of pseudo halftones and diffusion dithers. But for much detail the scripts are very slow.
    JET

Maybe you are looking for