Is there a way to work on the same project from multiple macs?

I was hoping to save a project that I was working in to the Cloud and then downlpad it to my other Mac. Can't seem to figure it out.

Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

Similar Messages

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Working on the same project on different Macs

    Hi everybody! Greetings from Switzerland!
    I am prety new to FC pro 5 running it on a PowerMac 2,5 Dual AND on a powerBook 1,67.
    The problem is that I started to cut my powerbook and now I want to continue working on the project on my Desktop. Is there a good workflow to do this?
    Thanks for suggestions!
    Stephan

    Then get them off of there. They shouldn't be there in the first place. :^)
    Seriously, never capture to your internal system drive. You are more prone to dropouts. Get yourself an external firewire drive, 7200 RPM, 8MB buffer, and copy the entire contents of the FINAL CUT PRO DOCUMENTS folder onto it. Then delete it from your internal hard drive...AFTER you confirm they are all present and working by using your G5.
    Shane

  • I have just signed upfor family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    I have just signed up for family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    hi, the app is not "shared", it works as if you bought the app twice with different accounts, only you paid it once. they should have 2 different villages since they're on 2 different devices.

  • TS4083 My folders that message rules divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder for it to update. Is there a way around this? The folders update on my mac fine when i check mail

    My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?

    My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years).  I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely. 
    Is this what I have to do? 
    Thanks for your help!

  • Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

    I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

    If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

    I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
    I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

    No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
    If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
    going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
    If you have a Time Machine backup you may also be able to use that to retrieve them.

  • I am using the PCI-6110E/​6111E with the NI-DAQ software version6.7​.Is there a way to record at the same time analog and digital channels?I​f,ye

    s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,yes can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition
    stops by a trigger?.
    Thank you for your interest in advance

    s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.PALE wrote:
    >
    > I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is
    > there a way to record at the same time analog and digital
    > channels?If,yes can I have timestamps for each sample?I mean,is there
    > a notion of time information on this board?Finally,is there a way to
    > know ,in the double buffer's case,the number of samples in the
    > halfbuffer which is not full if the acquisition stops by a trigger?.
    Start by looking around the examples that ship with LabVIEW (if you are
    using LabVIEW).
    Also look around zone.ni.com for general data acquisition information &
    examples. A good site.
    Mark

  • OSB - many developers working on the same project?

    Hi,
    I was wondering if you can see any way multiple users could be working on and publishing to the same domain?
    Now if a couple of developers is working on the same project using Eclipse (OEPE), if one publishes, any other changes by other developers will not be visible on the osb server, as they will be covered by the publish.
    Do you have any ideas?

    You have to use version control on this situation.
    We had used version control with in our project and you can save work and time.
    Rules
    1. You have to take a local copy of the project and make modification and compile and test it.
    2. If any user wants to leave for the day then, he has to comile the source code and push it in to source control. There may be some chances where you will pull out his code as well because of dependencies, when you compile it may fail. So compile and push in to the source control.
    3. There is an option where you can put a lock on the project folder where you are working.
    Note: If your team is working on common dev server, then you can think about having individual server still you should use source controlMuch more available.
    Use source control tools.
    Thanks,
    Vijay

  • Can two different account work on the same project?

    I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.

    Hi Alexandre,
    At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
    - Abhishek Maurya

  • Is there a way to do a mass contacts drop from one mac to another mac?

    Is there a way to do a mass contacts drop from one mac to another? I've been trying to find our how to do one without any sucess other than airdropping them one at a time and that's not productive.

    Welcome to the Apple community Confousticated.
    Show all contacts, select the first in the list, shift-click the last in the list (this selects them all) drag to your desktop, transfer the file to the other Mac and double click it.

  • How to work on the same project on two machines at the same time and also exchange progress seamlessly using Adobe Premiere Pro CC 2014?

    We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses for the respective machines to make matters simple (at least we thought it would).
    Now when we share a sequence between the two machines, every time we have to import and re-link media. Also each sequence import comes with its own set of files, which are actually already present in the project. Basically the new sequences are looking to re-link the media to the original/ source files only and are completely ignoring the file structure present in the project.
    In all editing softwares, timeline/ sequence sharing is a very common practise when working on multiple machines. Why is it so tedious in CC 2014? Every time we share a sequence between the two machines the media gets doubled and tripled in the project. As a result the project file size is increasing perpetually. Already Premiere CC 2014 is extremely laggy and slow, and this stupid bug is making it more difficult for us to finish our work on time.
    Has anybody ever faced this issue? How do we solve it? We are willing to try out any workflow that you can suggest.

    Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
    Mylenium

  • Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

    Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

    No.

  • Users to work on the same project

    Hello,
    I'm like know how can I to allow all users to work on the same project, but this project was only read.
    Help please,
    Thanks.

    Not sure what you mean, you should create separate usernames and register them. This is in the documentation (user guide).
    Then you can have these users work on the project.
    Jean-Pierre

Maybe you are looking for