Is there a way to work with two or more app at the same time on iPhone or iPad

Is there a way to work with two or more app at the same time on iPhone or iPad?

What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

Similar Messages

Is there a way to open different books on various apps at the same time like in android devices?

hello good peolpe, i bought an ipad mini retina for books reading and i would like to know if there is a way i can open a book with different apps like i do on android device where you can use various apps to open differents books at the same time, i would like to also know if there is a way to do the same thing but with power point and word files, and how can i open them on my ipad and transfer them, thanks every one for their time

Currently you can't. Maybe in iOS 8 that will be released soon.
 Cheers, Tom

Cannot work with two client side applications at the same time!!

Hi guys,
I developed two client side applications(applets). Locate the on Apache/Tomcat. There is also a Index.html file with two links, so when user clicks on each link the associated application will downloaded on his PC and ready to work. (In index.html I used window.open(�) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate browsers(IE5.5). And tried to work with them(minimized one and work with another). Soon I faced unexpected frizzing/locking or very slow running on both applications.
2-Then closed/killed one of them(killed IE). Then re-executed same application again. The application loaded with the last activated screen . Seems it never killed and it was still alive.
3- The only way to successfully working is one by one.
means execute & work with one, then kill that, and then execute and work with another.
To Debug:
When both applications were running(each on it�s own IE), I opened the Task Manager and saw there was only one IEXPLORER.EXE was running, also there was only one Java VM (a small bird icon) on right-bottom of the screen.
I believe this causes the problem. seems they both running in the same session. Since I opened two applications in two IE I was expected to see two IEXPLORER.EXE with two JVM. Am I right? Do you think so?
Any way, Now I am seeking to find the solution. My primary mind says probably I should not use window.open(..) in index.html to load the applications.
Would appreciate any command on this.

Cross post
http://forum.java.sun.com/thread.jsp?thread=184829&forum=31&message=589933

Is there a way to play to 2 blue tooth devices at the same time?

is there a way to play to 2 blue tooth devices at the same time from my ipad?

If you want to have 2 sets of headphones plaing at the same time, just get a headphone splitter. Here's a link to several that will work on your iPad......http://search.yahoo.com/search;_ylt=Ao7XF2KB2RaGRXX1SKOKmICbvZx4?p=headphone+spl itter+ipad&toggle=1&cop=mss&ei=UTF-8&fr=yfp-t-701

Is there a way to view different portions of a document at the same time?

Is there a way to view different portions of a document at the same time?

No. I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

HT204380 Is there any way to "FaceTime " between 3 or 4 users at the same time?

Is there any way to "FaceTime " between 3 or 4 users at the same time?

No. FaceTime is one on one only.

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

Is there any way to judge whether two streamings are casted by the same client?

Hello,
My app use two different streams to send video and audio from flash clients to the server.
So another client need to judge whether two streamings are casted by the same client or not.
Is there any way to do this?
For example, if it is possible to get ip address from netStream instance, it will be a solution.
Could anyone teach me this?
Thanks in advance!

From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
x
Subtract Composite Mode
Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
Blacks in the foreground image become transparent, while blacks in the background image are preserved.
Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
The order of two clips affected by the Subtract composite mode is important.
Difference Composite Mode
The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
The order of two clips affected by the Difference composite mode does not matter.

Is there any way to use bluetooth and force audio out at the same time?

I have an older treadmill that uses IFit which means a program on my phone controls my treadmill via an aux audio cable. I like using BT headphones so I don't have cords hanging. So...I'm trying to figure some way to either a) have iphone connected physically to treadmill but bt'ing music to my headphones at the same time or b) get iphone to communicate with two different bt devices simultaneously. (Treadmill can also be controlled via BT, but I still need the BT for headphones)
Any ideas would be great. I currently have cable running from treadmill to iphone and headphones via a splitter but it's a LOT of cord hanging which makes things difficult.

No. FaceTime is one on one only.

Can you have 2 apple tvs working with one computer - both active at the same time?

Can 2 Apple TVs - Generation 3 - work off the same computer?
I can't seem to get the 2nd Apple TV to find the network yet I have full signal and the Network name is correct.
Can they work at the same time using different content?

Hi SwedelostinAmerica,
Welcome to the Apple Support Communities!
The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
The following article explains Bluetooth pairing and usage. Please use it as a reference.
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Have a great day,
Joe

Is there a way to stream/publish RTMP, HDS, and HLS at the same time?

Can I stream/publish all methods at the same time? I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.

For your first problem, probably you need to insert something like this in your webpage to detect whether your webpage is being accessed from i-device or not..
if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i)))
deviceType = "iphone";
And it that is true, you may load following HTML in your video frame..
<head>
<body>
<center>
<video src="http://your-server:8134/hls-live/livepkgr/_definst_/liveevent/livestream1.m3u8" controls autoplay /> // HLS m3u8 url as src
</center>
</body>
</head>
otherwise if it Flash based device, load the osmf player .. with URL of .f4m (for HDS)
In case you want to serve on RTMP, load something like sample video player
sample index.html shipped with FMS in webroot folder may help you in this..

How to start two or more tasks at the same time?

Hi all,
I have few tasks setup to send analog and digital output to different channel with buffer and given sampling rate. I need to precisely control the timing of samples output to each channel. But if I start the task in labwindows
    DAQmxStartTask(taskHandle1)
    DAQmxStartTask(taskHandle2)
    DAQmxStartTask(taskHandle3)
they actually not start at the same time since they are exectued in sequence. I wonder how much time delay will be if I start each task in sequence. Also, is it possible to have 2 or more tasks started at the same time?
p.s. I think it will be easier if I could bind different channels to a single virtual channel but I don't think it is possible to create a signle virtual channel with analog channel and digitial channel.

RobertoBozzolo wrote:
I had success in doing something similar on the input side by sharing the same sample clock across the tasks with:
DAQmxCfgSampClkTiming (DigitalTaskHandle, "/Dev1/ai/SampleClock", 1000, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 1000);
In my application I had the power to have the same acquisition speed on all tasks, so that the sample clock could be same on all of them.
The conceptual framework is this one (pay attention to the step order):
Setup your AO task
Setup your DO task
Set the DO task to share the AO sample clock with the instruction given above
Start the DO task (IMPORTANT: it must precede the AO task start, so that DO task is started but does not generate samples)
Start the AO task
If you have different sample speed on the tasks, I suppose an alternative is to use a start trigger sharing some digital signal among them. I have seen examples that use a separate counter output as a start trigger.
Thanks a lot. It gives me a good information, I think that will help. I am encountering another sitution, if task1 is analog output with continuous samples with rate 100000 samples/second and task2 and task3 are a single digital sample (i.e. write only 1 sample to one digital line). In task1, I write continuous samples and there will be a spike (of 2.2V) at the time 1.2ms after the task started. And I want to write to the digital channels (task2 and task3) at 0.2ms before the spike was set in task1. In this case, there is only one sample written to DO task, so how does it work to use the sample clock source?
In your last suggestion, we could use tirgger but how does it help? Is there any example I can follow? Thanks.

FEBA - How to post two or more transactions at the same time?

Hi,
    one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
Thank you in advance,
Miguel

Hi,
I'm sorry for replying so late.
The solution I reached was to change the a few things in the standard.
Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
I hope you understand my English. I've problem with technical FI terms.
Here you are the code:
First I added a new contextual menu item:
CL_FEBAN_ALV_GRID=============CCIMP
call method e_object->add_function
    EXPORTING
        fcode = 'BS_POST_ITEMS'
        text = text-002.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    call method e_object->add_function
        EXPORTING
            fcode = 'ZBS_POST_ITEMS'
            text = text-Z02.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    call method e_object->add_function
        EXPORTING
            fcode = 'BS_KILL_ADVICE'
            text = text-004.
CL_FEBAN_ALV_GRID=============CCIMP
when 'BS_POST_ITEMS'.
    call method cl_feban_propagator=>raise_event
        EXPORTING
            i_event = 'POST_ITEMS'
            i_ref_to_item = l_ref_to_item.
*{ INSERT DHTK904078 2
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    when 'ZBS_POST_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'ZPOST_ITEMS'
                i_ref_to_item = l_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    when 'BS_LOCK_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'LOCK_ITEMS'
                i_ref_to_item = l_ref_to_item.
CL_FEBAN_PROPAGATOR===========CM001
    when 'POST_ITEMS'.
        raise event post_items
            exporting i_ref_to_item = i_ref_to_item.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    when 'ZPOST_ITEMS'.
        data: zvalor(1) value '' .
            export zvalor from 'X' to memory ID 'ZFEBA01'.
            raise event post_items
                exporting i_ref_to_item = i_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    when 'LOCK_ITEMS'.
        raise event lock_items
            exporting i_ref_to_item = i_ref_to_item.
Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
LNEW_FEBAF01
*     user parameter
        l_feban_position type c.
        field-symbols: <items> type item_tab_type.
*{ INSERT DHTK904077 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    data: zvalor(1) value '',
        zkwbtr type kwbtr,
        kwb type kwbtr.
    import zvalor to zvalor from memory ID 'ZFEBA01'.
    if ( zvalor is not initial ).
        if not i_ref_to_item is initial.
            assign i_ref_to_item->* to <items>.
            loop at <items> into h_item.
                select single kwbtr
                    into kwb
                    from febep
                    where kukey = h_item-kukey and
                        esnum = h_item-esnum.
                        zkwbtr = zkwbtr + kwb.
            endloop.
        endif.
        export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
    endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    refresh g_picked_items.
    if not i_ref_to_item is initial.
        assign i_ref_to_item->* to <items>.
        loop at <items> into h_item.
            move-corresponding h_item to h_picked_items.
            append h_picked_items to g_picked_items.
        endloop.
    endif.
    submit rfebbu00 and return
        user sy-uname
        with anwnd = r_doc->*-anwnd
        with s_kukey in s_kukey
        with s_esnum in s_esnum
        with buber = g_posting_area
        with mregel = '1'
        with function = 'C'
        with mode = g_mode
        with p_bupro = g_bupro.
*{ INSERT DHTK904077 2
*--> Miguel Estu00E9vez - 17/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    if ( zkwbtr is not initial ).
        select single kwbtr
            into kwb
            from febep
            where kukey = h_kukey-low and
                esnum = h_esnum-low.
                zkwbtr = zkwbtr - kwb.
        export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
    endif.
*<-- Miguel Estu00E9vez - 17/06/2008
*} INSERT
    refresh s_kukey.
    refresh s_esnum.
    clear h_kukey.
    clear h_esnum.
endloop. "loop over all picked items
call function 'CUSTOMIZED_MESSAGE'
    EXPORTING
        i_arbgb = 'NEW_FEBA'
        i_dtype = '-'
        i_msgnr = '110'.
RFEBBU00
* original transaction currency provided and posting area = 2.
        ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
    ENDIF. "INSERT - mpEURO
    CONDENSE ftclear-selvon NO-GAPS.
*{ INSERT DHTK903977 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    data: zkwbtr type kwbtr.
    import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
    if ( zkwbtr is not initial ).
        ftclear-selvon = zkwbtr.
        clear zkwbtr.
    endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
APPEND ftclear.
** Begin of comment C5053248
* perform druck_buzei_ftclear using ftclear-agkon.

How can I Resize Two or More Shapes At The Same Time?

I've got text over a rectangle over another rectangle. When I change my text, the size of the boxes needs to change and it's a drag ot have to do each one separately and constantly realign. Is there a way I can resize both of them at the same time tokeep the proportions the same?
Or is there a way I can enter #s to resize, so I could just enter the same #s for each shape?
Thanks,
Amanda

Here's an example of what Wyodor is referring to: text in shapes within another shape.. It goes one step further and adds the first shape+text into another shape but the concept is the same.
OT

Is there a way to code with multiple people at once on the same page?

In my class today we were tasked with building a web page and it would work so much better if we were able to work on the same pages all together at once.

There is no way to do this with DW, or any other coding environment that I've ever seen.
What does exist is a check-in/out system that allows multiple people to work on a single file, at different times. One person would check it out to make a change, save and check it in so the next could check it out and make their edits. That way an errant save from one person wouldn't accidentally overwrite the work of another who has it open on their machine.

Is there a way to work with two or more app at the same time on iPhone or iPad

Similar Messages

Maybe you are looking for