Is there an easier way to work with adobe after effects and final cut pro x

I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro... Is there a secret to easy working between FCPX and adobe after effects?
Thanks

You'll go from FCP X to and from Motion a lot easier than AE. Motion does pretty much anything AE does, most of the time faster and easier. Without Motion, you can't do custom templates. You can't customize the encoding of files without Compressor. Why would you want to remove them from your system? Leave them, use AE if you want along side of them. But I'd learn Motion first. Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

Similar Messages

Is the AVGA GTX 980 works with adobe after affect and premier

Is the AVGA GTX 980 works with adobe after affect and premier need to upgrade my video card thanks

What is AVGA? Did you mean EVGA?
Yes the GTX 980 works with Premiere. After Effects only uses the GPU for one function so it does not really matter much

Playing Russian Roulette with Firewire 400 drives and Final Cut Pro

oh boy! this has been a fun week!
I would love to ask the advice of the group about checking the firwire
ports on my computer, and also on the separate external drives.
Here is what has been going on.
Final Cut Pro 5 starts up and then starts to pinwheel.
but in short here is the result, I have recently lost 2 external
FIREWIRE 400 drives, one by LaCie that is my newest drive of the
group, it is 160gb 2 port FW400, and another by ProMax which also has
2 FW400 ports. the lacie was the first to go and is just not mounting
and does not show up using any of my Disk Utility software (even the
heavy duty stuff like DATA RESCUE II or Disk Warrior), I am thinking
that both ports are bad(maybe fried by another bad port on my tower?)I
can hear it when i boot it up and it sounds normal with the same
routine sounds, but it just doesn't mount, nor show up, so is this the
ports?fried?
Now, on my tower I have the following setup - 2 FW400 ports that are
STOCK that came with the TOWER G4 when I bought it. There is also a
FIREWIRE 400 card which has 3 ports. In the past I have used all the
ports for drives, and for a printer and a scanner in my studio.
Everything mounted and worked properly. Then,recently I moved the
drives and the tower to another location(in the room and no I didn't
drop or shake anything) and replugged everything in again, probably in
different slots but upon boot the external firewire drives didn't mount.
I had to UN PLUG them and then RE INSERT them by trial and error(which
I thought normal as I have done this when using these drives with my
laptop, until I got them to mount. they all did mount. However, once
up an running I started Final Cut Pro 5, and it started to get a
PINWHEEL for more than reasonable and if forced me to RESTART the
computer.
The next time, one of the HARDDRIVES (the LaCie 160gb) was no longer
mounting, and I tried to change firewire ports and on the stock and
also on the card for fear that the 3rd party card might be faulty.
I even ran APPLEs HARDWARE Utility and it gave no results as to
anything faulty on the firewire ports. It just said they were there.
Both stock and the PCI firewire card.
Next, I tried to mount this LaCie 160gb onto another computer, with no
results.....it now acts as if both ports are faulty, again, I hear the
drive spinning and going through its initial startup, which sounds
exactly like the other drive, but it never mounts. which is odd...what
is your idea about this drive? and how to save it?
is there a way to take the drive out of the casing and test it in my
other LaCie160gb that is currently working?
2nd, this is where it gets funky, then upon starting Final Cut Pro,
the pinwheel reappeared now with another firewire drive a PROMAX 160gb
that was plugged into the STOCK FW 400 port (on the tower) starting to
show a RED light(not good), however, after restart, I didn't see the
PROMAX drive mount, but I was able to load it up with DATA RESCUE II,
and it is doing a QUICK SCAN to save the DATA on that disk......
now I have backed up most of this data, but the problem now is not the
data, it is whether or not to even plug any of my other drives into
any of these FW ports until I can test them for faultiness.
A friend told me of another friend having a problem where a firewire
port was frying drives as soon as they plugged them into the certain
port. How can you figure this out without re-acting like 'Deerhunter?'
This feels like playing Russian Roulette......if you get my drift?
How do you check any ports for such foul play?
Thanks in advance for your support....
makin

well, now I am finding out that the culprit is I think the POWER MAC g4 itself.
For it has been blowing the firewire ports over time by frying them with power.
Has anyone had this happen?
My Power Mac g4 will not shut down.
It powers itself back up.
I end up having to press the POWER button and holding it, but this sends power to the firewire ports and I can hear them turning on.
so all this time I had just dealt with the issue
Apple had seemed to blame it on a 3rd party MATROX card in the PCI slot.
But, now that has long been taken out of the equation.
The only thing left is that the 17inch MONITOR is plugged into the POWER MAC and for some reason it is keeping a charge?
Can anyone help me in this matter?
As this has haunted me for 5 years with this machine, and I have probably fried more drives than I care to mention.
I just want my computer to SHUT DOWN when I tell it to.
is that too much to ask?
Might the POWER SUPPLY be at fault?
What in God's name could keep this ******* of a computer from shutting down?
I have no USB hubs or keyboards hookedup
the only thing is the MONITOR itself....that you can press its button to shut down etc.
I would be honored to know what this is as APPLE CARE never could figure it out
I didn't want to go through the hassle of taking out the RT MAC card, and just either left the machine on, or Unplugged the thing....
that is a nasty way to shut down a computer is it not?
much thanks to any one who can help me to figure this out?
thanks
singleton

Any experience with Adobe After Effects?

Has anyone experience with Adobe After Effects and FCE. Does it work together?
WA

They will work together. There is no export to or send to function or no XML function to go to AE but the media will work in AE and the finished product can be brought into FCE.

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Is there an easy way to reinstall my adobe cs6 suite web design and premium

Is there an easy way to reinstall my adobe cs6 web design and premium

Download CS6 from Download CS6 products
Install then enter your CS6 serial number to license it.

Is there a way to run Motion and Final Cut Pro on Separate Machines?

Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
-Matt

I do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

Plz give me work flow of film editing in Final Cut Pro..

Hello Everyone...
I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
I tried few options like using FCP & Cinema Tools..
1. Captured 25fps clips and cofirmed to 24fps in cinematools.
2. In FCP the Timeline frame rate is 24fps
But I am not able to understand..
1. What is Database?
2. Cant we capture 24fps in FCP?
3. How to Synchronize captured clips with Cinema Tools database?
4. How to link the captured clips in to Cinema Tools database?
5. Where do I enter the KN Start & KN End?
6. What about Pull List & Cut List?
Please give me the details of film technics in Final Cut Pro....
Thanks in advance....

I knew I'd find this same post here. That makes three versions of trhe same list of questions.
Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
bogiesan

Very disappointed with G5 and Final Cut Pro

At work we bought a G5 last year for Final Cut Pro to edit plain DV video downloaded from a MiniDV camcorder via Firewire. The machine has 4gig memory, 6800 graphics, and is running FCP 5.0 with all of the Software Updates installed. The G5 is supposed to replace a much older PC that is running Adobe Premiere 2.0 on Windows XP. Even though the PC only has a single Pentium 4 CPU and older ATI X800 graphics, it does FAR more real-time effects than Final Cut Pro does on the G5. Why is this?? Almost everything I do, from titles to minor effects will appear instantly on Premiere Pro, real-time, no rendering needed. But almost everything I do on the G5 will show me a big red X until it has rendered. If I add a title, I still have to wait for it to render. If I add a light blur effect, I still have to wait for it to render. This is very annyoing and very depressing, we spent a lot of money on the G5. In reality, at least for us, it is slower than the older PC it is supposed to replace forcing us to spend a lot of time staring at those big red X'es while Final Cut Pro renders.
Are we doing something wrong? Or is this the case with all dual processor G5s running Final Cut Pro 5.0?? Is there anything we can do to speed up rendering or enable actual real-time effects/titles?

Welcome to the family.
Are we doing something wrong? Or is this the case with all dual processor G5s running Final Cut Pro 5.0?? Is there anything we can do to speed up rendering or enable actual real-time effects/titles? < </div>
Simple failure to understand your new tools. Open the manual, run the tutorials. Study carefully the sections on how to set up all of your preferences for DV. It's easy and when you're done you're going to feel really silly.
If your company intends to make money with FCP you must invest time to understand what you bought since you bought it without bothering to test drive FCP on a G5. If you liked Premiere on Windows, you may never enjoy using FCP on Macintosh. The switch can be devastating. You could be one of those poor souls who just doesn't get it. Turn your system over to a more open minded person on your staff.
bogiesan

Quicktime 7.5 and Final Cut Pro is there a problem?

Quicktime 7.5 and Final Cut Pro is there a problem with this version of Quicktime?
i cant capture at all now! I can control my camera but no capture or footage in the window?
I can capture using IMovie fine!

Alister, there's no problem with it on my Mac, nor none that I know of ... I think you must have an install specific issue.
Check your camera setting matches your currently chosen Easy Setup ... in fact, close the Log and Capture window, then go ahead and re-choose the appropriate Easy Setup for your camera and I/O hardware, then choose View menu > Refresh A/V Devices, and then reopen Log and Capture ...
... still no go? if not then post pack with complete details of your hardware and software, your camera, the recording format, any I/O equipment that is in the mix etc.

Compatibility issues with Final Cut Express and Final Cut Pro

I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.

{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

Panasonic HDC-SD9 and Final Cut Pro, they finally WORKS!

I finally get the Panasonic HDC-SD9 and Final Cut Pro to get along.
http://37prime.com/news/?p=99
http://37prime.wordpress.com/2008/04/11/panasonic-hdc-sd9-perian-to-the-rescue/
Perian 1.1 to the rescue.

The solution has been around for about three weeks now.
http://discussions.apple.com/thread.jspa?messageID=7141858&#7141858
It always good to do a quick search for solution using the search dialog box.
glad it's working.

Is the 3rd party plug-in 'Synthetic Aperture Color Finesse' which comes with Adobe After Effects, free to use?

Is the 3rd party plug-in 'Synthetic Aperture Color Finesse' which comes with Adobe After Effects, free to use? 'Synthetic Aperture Color Finesse' installs its documentation in the plug-in’s subfolder in the Plug-ins folder.
I cannot locate anywhere on the Adobe site which specifies that this plug-in is free to use for educational institutions.
Can anyone assist please?
Regards
Susan O'Reilly
Staffordshire University

Yes, it's free and inclusive with every AE install.
Mylenium

Is there an easy way to switch mini dvi between monitor and tv?

I would like to be able to connect my mini's dvi output to a either a monitor or my tv. I am not trying to get a display on both simultaneously. With a DVI to DVI cable between mini and monitor and a dvi to hdmi cable between mini and tv I think that I can swap dvi connections at the mini, but that looks like a pain. Is there an easier way to do this?
I am about to order the dvi to hdmi cable. Is the mac mini's dvi port hot plugable or do I need to put the mini to sleep or shut down? Thanks,
Owen

Welcome to Apple Discussions!
Without some extra hardware, you can't. The mini, like all Macs, looks for data from the display to determine what settings it makes available to the user, so with two displays connected and feeding their available configurations, the mini will get very confused! Even if the two displays have one or more common settings that will actually work, each time the mini boots or wakes and detects the display, one or other (or both) are likely to go blank.
There are adaptors you might consider, such as those from Gefen, but they are not inexpensive. Have a look at http://www.gefen.com/kvm/dproductlisting.jsp?listingCategory=Switchers&productTy pe=dvi for a list of available switching options, though beware that for the most part, the need being met is for TWO sources and ONE display, not your ONE source and TWO displays.

Is there an easier way to work with adobe after effects and final cut pro x

Similar Messages

Maybe you are looking for