Is there and easier way to do keywords?

I love the idea of assigning keywords to my photos, but as soon as I foun that I have to enter in each keyword in the preferences pane before I can use it I am now not looking forward to it. I was hoping that I could just enter in my keywords on each photograph seperated by a comma or something. Is there an easier way to do this?

Maybe you could use a Keyword Assistant
bd

Similar Messages

  • Is there and easy way for Position control using analog input?

    Hi Everyone,
    I would like to set one of the axis with stepper motor using analog feedback to keep the set position which is coming from the analog input.
    In other words I would like the stepper to move when the analog input changes. I need it as a "background service" so the rest of the motion could be easily controlled from the NI-Motion Assistant.
    Is there any easy way to do this? Even complicated is ok but the control should be done by the NI Motion card not the PC processor.
    Thanks,
    Andras

    Hello Andras,
    please use the link below to get the motion example.
    http://zone.ni.com/devzone/cda/epd/p/id/353
    Kind regards,
    Elmar

  • Magic Mouse: Is there and easy way to keep switching scroll on and off

    I'm afraid I'm not very adventurous with Magic Mouse. The only feature I use is One finger Scroll - with intertia. Its great for web surfing. Trouble is its a nightmare for programmes like illustrator and inDesign where the page leaps about in a crazy way at the slightest touch. So, I currently spend all day going to System Preferences - Mouse - to switch the Scroll feature on or off. Does anyone know a better way of doing this? Is there a keyboard command? Could I set something up in Automator? The ideal would be on the mouse itself: Two taps turns it on, two taps turns it off. I've just downloaded an app called BetterTouchTool which I though would be an answer to my prayers - but I can figure it out.
    Any ideas, anyone?

    Thanks Capfred
    I've tried switching off inertia - but I prefer it for websites. Inertia is much faster and more fun to use. Annoying thing is, I never had this problem with the old Mighty Mouse because it was easy to avoid touching the little scroll ball when I didn't want to. My body language is obviously not cut out for Magic Mouse because sometimes when I'm reaching for it my finger must slightly slide across it before I grip it firmly. This isn't a problem on most websites because the only option is to scroll up and down. But in Illustrator and inDesign, this causes my carefully centred page to go flying left or right and I have to use a keyboard command to re-centre it.
    I'm sure I can't be the only one to have this problem!

  • HT1660 is there an easy way to delete the whole itunes library and and start again. I notice there is only an add file/folder button but no remove facility

    I recently upgraded to the iphone 5 and managed to sort the transition out with little trouble but noticed when I tried to put my music on that Itunes has messed with album info and either it or me has generated several copies of the same albums over the years and it makes it quite dificult to sort it all out before reloading on the phone. To stop the chaos I had hoped to clear the library and start again but cant find a way to do it. I was hoping to sort all my music out in original files and consolidate them into a proper folder. HOw do I do this. I notice there is an add fole and folder button but no take away??? is there an easy way?

    Use Shift > View > Show Exact Duplicate Items as this is normally a more useful selection. You need to manually select all but one of each group to remove. If you have multiple references to the same files then don't send to the recycle bin. Use my DeDuper script if you don't want to do it by hand. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • I am looking to "move out" of my computer and into my wife's, is there an easy way to accomplish this task, keeping all my files and setting up a second user?

    I just bought a new external 3TB hard drive for this task and want to keep my items seperate from hers for both our sanity.
    I figured that I would do a time machine back up and use that to do the move part of things.
    But as to setting up the new user on her computer I am just not sure if I can "tell" the computer to only use the new drive for my stuff and only acces the new drive for all things related to that new profile.
    More then anything else I want to be able to say that all things that are hers have not been touched/acccesed/deleted by any of my actions. And that I am "confined" to the new drive.
    I hope this makes sence.
    Mr Geef

    I have a feeling there are music files in my folders that are not linked to iTunes but can't figure out how to import them without going through all 8800+ files. Is there an easy way to import all the files without losing the current playcounts
    AFIK there isn't an easy way of linking up to a lot of dead tracks and retaining play counts etc, except by finding the dead tracks and repairing each link individually. The only exception to this is if there is a simple error in the path that can be fixed by a search and replace on the xml library file, then rebuilding the library. However it doesn't sound as though that would be a solution for you.
    This MacMuse tip has a way of finding dead tracks if that helps.
    http://discussions.apple.com/thread.jspa?threadID=121967
    It is much simpler to sacrifice the playcount information and just reimport your iTunes Music folder. Then you can eliminate the dead tracks with a script. One of the forum members has written one that you can find here:
    http://home.comcast.net/~teridon73/itunesscripts/

  • Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

    is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed.
    my process has been (i am open to suggestions for other free and EASY services/methods):
    garageband : create & edit audio. add 1400x1400 image.
    share to itunes.
    drag file to desktop.
    upload .m4a file to google drive.
    create a link post in wordpress using "podcast" tag & create "podcast" category.
    click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
    i copy this url.
    go to itunes store > then "submit a podcast"
    itunes gives me the error message "we had difficulty downloading episodes from your feed."
    when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
    i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
    still the same error message.
    i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
    wordpress seems to be encapsulating the rss, what am i doing wrong?
    this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

    if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

  • HT201302 I have over 1000 photos in my camera roll, and I have saved them to my computer.  Is there an easy way to delete some or all of them to clear out space on my iPhone?

    I have over 1000 photos in my camera roll, and I have saved them to my computer.  Is there an easy way to delete some or all of them to clear out space on my iPhone?

    The quick way is when you imprort them to an app on your computer, usually there is the option to delete everything on the phone that was imported.  If you declined that option, then you have to do it one by one or manualy select in edit mode.

  • HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?

         after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?  thanks.

    thanks for the reply.  guess i'll have to do that.  apple, not really happy with what you've done with this latest update.  have not been able to enjoy my music in my car since the update.  most of us dont mind changes that progress timely, but this was much more than just a progression.  this was a complete change.  and not a good one, at all.  thanks to the two people that replied.  appreciate it.

  • If I've downloaded my music to an itunes library from an external hard drive and I have several duplicate songs, is there an easy way to delete the duplicate songs? Or, do I have to go through my entire library song by song to delete duplicates?

    If I've downloaded my music to an itunes library from an external hard drive and I have several duplicate songs, is there an easy way to delete the duplicate songs? Or, do I have to go through my entire library song by song to delete duplicates?

    In iTunes, File>Display Duplicates

  • Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

    Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • Is there an easy way to switch mini dvi between monitor and tv?

    I would like to be able to connect my mini's dvi output to a either a monitor or my tv. I am not trying to get a display on both simultaneously. With a DVI to DVI cable between mini and monitor and a dvi to hdmi cable between mini and tv I think that I can swap dvi connections at the mini, but that looks like a pain. Is there an easier way to do this?
    I am about to order the dvi to hdmi cable. Is the mac mini's dvi port hot plugable or do I need to put the mini to sleep or shut down? Thanks,
    Owen

    Welcome to Apple Discussions!
    Without some extra hardware, you can't. The mini, like all Macs, looks for data from the display to determine what settings it makes available to the user, so with two displays connected and feeding their available configurations, the mini will get very confused! Even if the two displays have one or more common settings that will actually work, each time the mini boots or wakes and detects the display, one or other (or both) are likely to go blank.
    There are adaptors you might consider, such as those from Gefen, but they are not inexpensive. Have a look at http://www.gefen.com/kvm/dproductlisting.jsp?listingCategory=Switchers&productTy pe=dvi for a list of available switching options, though beware that for the most part, the need being met is for TWO sources and ONE display, not your ONE source and TWO displays.

  • Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

    Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
    iMovie '08, Mac OS X (10.5.8), FCE 4

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • HT5312 I want to change my rescue email address. When I get to step 4 above no Password and Security to click. Is there an easy way to do this?

    I want to change my rescue email address.I've followed the instructioins to step 4. I have no 'Password and Security@ to click. Is there an easy way to change it?

    Welcome to the Apple Community.
    It should be here.

  • If I have say 200 photos in an EVENT and I use 50 of them in an ALBUM and months later I'm happy with the ALBUM and want to trash the 150 extras in part to save space on the hard drive, is there an easy way to find which photos to delete?

    If I have, say 200 photos in an EVENT and I use 50 of them in an ALBUM, and months later I'm happy with the ALBUM and want to trash the extra 150 photos, is there an easy way to know which 150 photos to trash? My idea is to not have hundreds of photos taking up space on the hard drive.
    Thanks.

    Various ways:
    Easy one: Flag the ones you want to keep (do this in the Album - Select All and Flag)
    Then:
    File -> New Smart Album
    Event -> contains -> Name of the Event
    Photo -> Is Not -> Flagged
    will find the unwanted 150.
    Regards
    TD

  • HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

    When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

    Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

Maybe you are looking for

  • Office 2013 RMS Client Configuration - Your Machine is not setup for IRM

    Hi All, I have successfully setup a test AD RMS farm but stuck at trying to configure Office 2013 to work with this. The farm configuration is as below DC: Windows 2003  AD RMS Server: Windows 2008/ SQL Server 2008 R2 Client: Windows 7 64 bit with Of

  • CONDITIOIN VALUE NOT REQUIRED TO INCLUDE IN PO NET PRICE

    HI, I have scenario that i don't want to include the condition value into PO net price while doing GR. Regard Kashif

  • Sybase Input Parameter ?

    folks i am trying to execute a sybase stored procedure it expects one input parameter , below is the stored procedure name and the input parameter, sp_case '@sCase_ID' From my program if i pass in <b>Case_ID</b> to this stored procedure , It's compla

  • Keybard and Mouse Preferences Not Saving

    We have an OS X server running with remote home folders for a number of different users. Some users have enforced preferences on them. However, on accounts that should have no enforced preferences the keyboard and mouse preferences are getting re-set

  • Drill down charts  Hierarchy in Pie Char  not working need to instal Patch

    Hi Folks, We are Using Buisness Objects 3X version,  Our Client Requirement is to drill down the Hierarchy thro Table and also he needs to see in Charts. We dragged the Chart in the Report also,  while we drilling down in the Table,  it is working fi