Is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
Similar Messages
-
Dear Guys
I think someone knew my pasword and the did the changes.
i have been using ths id since long.
so one day when i was buy an app it said password is wron and try agian
so i did forgot password but its not sending and email to my mail
what to do and how to get my Apple ID
who should i contact for verification
please helphi
i have same problem from few days .the coustemer support advice me to contact the apple servises in the nearest countory ( i m Naw in Iraq). but the numbers avilable ae availabe for Suadia arabea and UAE just to call from inside
any body help me by provide me number of any apple servisees i cnt reached from here Iraq ....please ? -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?
-
why does my ipad mini keep glitching!! /:
Your iPhone doesn't require as much power to charge as your iPad needs so there is a possibility that the charge could have a problem even though you were able to charge the phone. If you can try a different power adapter and still have no luck, then the only thing left - IMO - is to contact Apple support and see what they advise.
BTW .... Copied from your first post ...
i then decided to do a reset or restore by pressing and holding the home button and the sleep/wake button down.
I'm not trying to be a nitpicker - but what you described is a hard reset and your post gave no indication that you tried a software restore - which I referenced in my post. That's why I suggested the restore.
Many times restoring the iPad to factory settings can help "revive" the device. If you have tried restoring according to the two support articles that I directed you to and still have no success, you are probably out of luck getting any further help on this site. That's all that you can try at this point at least AFAIK. -
One day I was going to download music from my laptop to my ipod, I was able to download all the songs I wanted but later when I try to charger my ipod it wouldn't let me. The next day I bought a new charger but it still didn't charger. I try pressing the power And home button at the same time but it still wouldn't turn on or charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.
What happens when you try to change them?
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplainFirstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult. -
The home button for my ipod touch 4th generation does not respond all the time, What do I do?
The home button for my ipod touch 4th generation does not respond all the time, What do I do?
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Maybe you are looking for
-
How to configure datasync proxy for a cluster
Hi, I am in the process of configuring Portal on a cluster and can not get the sync server to syncronize the data with the managed server's repositories. I configured "SyncServer" as a managed server and deployed a separate webapp "datasyncproxy", wh
-
My Hp pro book 4415s will not power up? We bought it in 2010.
I have a pro book 4415s notebook purchased in 2010. Although the power cable is new ...the laptop power light only flashes yellow yet the computer won't turn on
-
Create a table with all the months between two dates
Hi all, I have a purchase table recording individual purchases. One of the fields is my Date field (date of purchase). I would like to create a table 'All_months' with two entries ('month_no' and 'month') which will be based on the first and last dat
-
Screen Sharing vs Third Party viewer issues
My Facts: 1. Client Screen Sharing always works with a specific Unix host 2. The same client Screen Sharing sometimes works a sometimes does not with a specific Leopard host 3. Chicken of VNC client always works with the Leopard host in 2 Symptoms: W
-
hey guy i have a problem picking a graphics card that is compatible with my computer i have a pavilion a6030n specs are Chipset GeForce 6150SE nForce 430 Motherboard Manufacturer: ECS Motherboard Name: MCP61PM-HM HP/Compaq motherboard name: Nettle-GL