Is there any BAPI calling only ABAP command SET UPDATE TASK LOCAL
Hi abapers
we have a requirement to run SET UPDATE TASK LOCAL befor calling BAPI_ENTRYSHEET_CREATE command by JAVA through JCO.
is there any BAPI that contains SET UPDATE TASK LOCAL command or simillar functionality.
Thanks & Regards,
Ramesh
You could write a wrapper RFC function module which calls your BAPI and also the SET UPDATE TASK LOCAL.
Regards,
Rich Heilman
Similar Messages
-
Is there any bapi/Function module to change only header text in fb02
Hi ,
I want to change only header text in FB02 .the header text will come from a internal table.My Requirement is
1. open a document in FB02
2.change the header text of the document.
Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
I Tried bapi_acc_gl_posting_post, fI_document_change..
is there any BAPI/FM for this???
Thanks,
ChallaYou can use SAVE_TEXT FM
Thanks
Seshu -
Is there any BAPI or function module to delete entries from a table (VBAK)
Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK sales document: header data
selection fields:
VBAK-LIFSK ≠ <BLANK>
VBAK-ERNAM = userID used by e-Sales / IVE
(EP-BATCH / EAI-BATCH)
VBAK-ERDAT <= Current system Date
VBAK-ERZET <= Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
ReddyHi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
s_lifsk FOR vbak-lifsk DEFAULT '10',
s_ernam FOR vbak-ernam,
s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
s_erdat like vbak-erdat,
s_erzet like vbak-erzet.
DATA:
BEGIN OF int_final OCCURS 0,
w_vbeln TYPE vbak-vbeln,
END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
INTO TABLE int_final
WHERE lifsk EQ p_lifsk
AND ernam IN s_ernam
AND erdat IN s_erdat
AND erzet IN s_erzet.
IF sy-subrc = 0.
LOOP AT int_final.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = int_final-w_vbeln
ORDER_HEADER_IN =
order_header_inx = int_order_header_inx
SIMULATION =
BEHAVE_WHEN_ERROR = ' '
INT_NUMBER_ASSIGNMENT = ' '
LOGIC_SWITCH =
NO_STATUS_BUF_INIT = ' '
TABLES
return = int_return
ORDER_ITEM_IN =
ORDER_ITEM_INX =
PARTNERS =
PARTNERCHANGES =
PARTNERADDRESSES =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
SCHEDULE_LINES =
SCHEDULE_LINESX =
ORDER_TEXT =
ORDER_KEYS =
CONDITIONS_IN =
CONDITIONS_INX =
EXTENSIONIN =
ENDLOOP.
LOOP AT int_return.
WRITE:/ int_return-type,
int_return-id,
int_return-number,
int_return-message.
ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy -
Is there any BAPI allowing to retreive dump information in details?
Dear all,
I would like to ask a question about dumps that are sometimes generated on SAP sytems.
Each morning, by using the transaction ST22 I can see the dumps that were generated during
the precedent day. I click on each dump label then in the menu System > list > save
I can save the dump file which includes technical information about the error (our
developers look inside in order to find out what went wrong that gernerated the error)
Now, sometimes there are actually too many dumps and saving each file by ST22 one by one
takes too much time.
I know ABAP programming language, I would like to ask is there any BAPI in SAP which could be called
and that provides the same details that you can have by ST22 about the generated dumps? I was thinking
to call inside a loop (as many times as there are dumps) this BAPI and write the datails about each
dump in DATASET and creates the files.
So, do you know any BAPI providing information about dumps?
Thank you very much for your attention,
Kind Regards,
DariyooshHello there,
Thanks for this information, I'm going to look into the function group in order to
see how I may use its function modules properly for my purpose.
Thank you very much,
Kind Regards,
Dariyoosh -
Is there any BAPI returning the affected organisational units to users?
Dear all,
I would like to ask a question about organizational units. Whenever I want to affect a user to a given unit I
use PPOME transaction. If I want to do this in ABAP level I use the function module RH_RELATION_WRITE.
I would like to know, is there any BAPI returning the affected organizational unit to a given user?
Thanks in advance,
Kind Regards,
DariyooshAlberto Sesma wrote:
You can use Function Module RH_STRUC_GET
>
>
> CALL FUNCTION 'RH_STRUC_GET'
> EXPORTING
> ACT_OTYPE = 'US'
> ACT_OBJID = user_name
> ACT_WEGID = 'US_CP_O'
> TABLES
> RESULT_TAB = LT_RESULT_TAB.
>
>
> You will get the related org units in LT_RESULT_TAB. There are other two table parameters in that function module that you may find useful.
>
> If the function does not return any valid data you may try with other values for WEGID. You will find all the possible evaluation paths in transaction OOAW.
>
> Kind regards
Dear Alberto,
Thank you very much for your answer. I didn't know this FM and it solved my problem.
For those who may be intered here is exactly I proceed. Suppose that in the table HRP1000 you have an
structure (type S) with ObjID = 50000342 and you wish to have the SapUserID of the affected persons.
DATA:
affected_users TYPE STANDARD TABLE OF swhactor,
user LIKE LINE OF affected_users.
START-OF-SELECTION.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
act_otype = 'S'
act_objid = '50000342'
act_wegid = 'A008'
act_plvar = '01'
act_begda = sy-datum
act_endda = sy-datum
act_tdepth = 0
TABLES
result_tab = affected_users
EXCEPTIONS
NO_PLVAR_FOUND = 1
NO_ENTRY_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT affected_users INTO user.
WRITE: / user-objid.
ENDLOOP.
Also in transaction OOAW we can have all possible values for the third argument of the module function (act_wegid).
For those who are interested, here are a few among many possible values which seem to be intesting for my
problem.
DFPS_DG1----
Organizational Unit of User
DFPS_DG3----
All Org. Units Above a User
ORGAS----
Closest Organizational Unit and structure
ORGASS----
Closest Organizational Unit and structure
PPLEORG -
Organizational unit of an employee or position
SAP_ORGP----
Organizational assignments of a user/person
SAP_USOG----
Organizational Assignments of a User
SAP_US_S----
Positions and Personnel Number of a User
US_S_S_C----
All positions and jobs of a user
WFM_ORGU----
Organizational Assignment of User
WF_ORGUN----
Organizational unit of a user/person (module id Ben./Pers.)
For example, let's say we have a userid named MYUSER01 and we would like to find all structures to which the user
is affected. Here is how I proceed.
DATA:
itab_user_structures TYPE STANDARD TABLE OF swhactor,
row_user_structures LIKE LINE OF itab_user_structures.
START-OF-SELECTION.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
act_otype = 'US'
act_objid = 'MYUSER01'
act_wegid = 'US_S_S_C'
act_plvar = '01'
act_begda = sy-datum
act_endda = sy-datum
act_tdepth = 0
TABLES
result_tab = itab_user_structures
EXCEPTIONS
NO_PLVAR_FOUND = 1
NO_ENTRY_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT itab_user_structures INTO row_user_structures.
WRITE: / row_user_structures-objid.
ENDLOOP.
Thank you very much for your help.
Kind Regards,
Dariyoosh -
Is there any way to run abap program in dialog process with process chain?
Hi.
I just want to run custom abap program in every 30min.
so I made process chain and connect abap program.
but it returns NOTHING when background running.
the program has ABSOLUETLY no problem when it's running DIALOG process.
custom program is modified from sap standard program for my use.
so complicated and hard to read that I cann't figure out what's problem in backgound job and even hard to debug in background process.
is there any way to run abap program in dialog process in every 30 min.?
or call BSP page or call function.
any solution will be helpful that excuting PROGRAM or FUNCTION or BSP PAGE in schedule job and should running dialog process.
thanks.
Lee.Hi,
did you try using sm36 transaction?
1Give these values in Gereral data
Create one sample job "SAMPLE JOB"
Priority "A"
Execu target - Your application server
2Click start conditon
schedule according to ur requirements.
3.Click Step button
Give your ABAP program name.
fill variants if it has any variants.
if it is useful assign points
Regard,
Senthil Kumar.P -
Is there any BAPI for closing projects through CJ20 transaction?
Hello Experts,
Is there any BAPI available for the CJ20 transaction to try close a project? I have been trying to locate one but haven't came across anyone. Please do let me know if in case any of you happen to know about 1 such BAPI.
Regards,
UdayHi,
A project definition can be changed using the BAPI "BAPI_BUS2001_CHANGE". To do this, the project definition (PROJECT_DEFINITION) and the new values must be entered in the structure "I_PROJECT_DEFINITION". In the structure "I_PROJECT_DEFINITION_UPD", the fields that are to be changed must be marked with 'x'. The other fields remain unchanged. Before the project definition is changed, the following is checked:
Is another project already being processed in the LUW ?
Can the project be locked?
Is the changed data still consistent (do the company code and controlling area match?)
If all checks are successful, the project definition is changed in the document tables.
for example:
CALL FUNCTION 'BAPI_BUS2001_CHANGE'
EXPORTING
I_PROJECT_DEFINITION =
I_PROJECT_DEFINITION_UPD =
" TABLES
" ET_RETURN =
" EXTENSIONIN =
" EXTENSIONOUT =
Thanks,
Dhruv Kumar Malhotra -
Is there any BAPI which combines web and SAP??
Is there any BAPI which combines web and SAP??
Hi Krishna,
<b>Good .. check the following documentation
BAPIs are technically nothing else but RFC-enabled function modules meaning that they provide us with external access to the SAP system.
However, BAPIs are more than "normal" RFC-enables function modules in that they generally access SAP business objects (like customer, sales order, etc.).
Usually, a BAPI corresponds to a certain dialog transaction dealing with a SAP business object (e.g. BAPI_USER_CREATE -> SU01 to create SAP users).
In web terms RFC is similar to HTTP and BAPIs are CGI applications.
RFC will normally provide sy-subrc 0 or >0. Most of the BAPIS will provide a return-structure.
RFC and BAPIs are remote enabled function modules. They are practicly the same. A BAPI is one step further as it usually is a self contained business function, such as "Create Purchase Order", or "Change Sales Document". BAPIs interface is very well defined and documented. BAPIs can be found in the BAPI browser via transaction BAPI. RFCs are just remote enabled function modules.
refer links,
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm</b>
Good Luck and thanks
AK -
Is there any Bapi for Physical Sample creation
Hi Folks,
Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a physical sample......
Any ideas or suggestions would be appreciated..
thanks
chaithanya.HI Chaitanya,
You can use : BAPI_BATCH_CREATE
it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
Regards,
-Venkat. -
Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.
Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export. -
Is there any BAPI or FM which updates or modifies FD32 transaction
Is there any BAPI or Function module which updates or modifies the fields of FD32 transaction screens
Hi, Srikanth
Please Have a look at this Link [BAPI for FD32 |bapi for FD32]
Please Search Before Posting
Hope will Solve out your Problem,
Best Regards,
Faisal -
Is there any BAPI's to get system information
HI All,
Is there any BAPI's to get system information like name which NWcomponent is installed, version, function modules which are implemented.
ITS VERY URGENT
ThanksHi,
bapi for getting the details of system inthe sense euipment i believe so try this bapi
BAPI_EQUI_GETDETAIL
BAPI_EQUI_GETLIST
Regards,
sana. -
Is there any BAPI or FM to update the scheduled dates of a production order
Hi Friends,
I would like to know if there is any BAPI or function module available to update
the Scheduled finish and Scheduled start dates (GLTRS,GSTRS fields from AFKO table) of
a production order.
I have searched the forum, but I could not find anything.
It would be of great help if anybody let me know about any Function Module / BAPI.
Regards
AdityaHi ravi,
in crm we have a t-code to cancel billing doc just execute and provide billing doc no and test run.
that automatically cancel the billing doc. CRMD_BILL_REV Cancel Billing Document
and here is the function module to cancel the billing doc..
BAPI_BILLINGDOC_CANCEL1 Cancel billing document.
if you want to more just fallow this links i think this might be help full to you..
https://help.sap.com/saphelp_sm40/helpdata/en/6f/f26863448111d5992400508b6b8b11/content.htm
Cancellation of Billing - Billing - SAP Library
let me know if there is any queries.
Thanks & Regards,
Srinivas. -
Is there any BAPI to update LFA1/LFB1?
Hi, Expert:
I wrote one customer program to upate the following two fields. Is there any BAPI I can use, because It's master data. we need create CHANGE POINTERS. we can't directly update them.
LFA1-SPERQ (2) Function That Will Be Blocked
LFB1-ZAHLS (1) - Block key for payment
Regards,
ZhangHi experts, I have to modify the master data also, but, the scenario for me is diferent. I have to update the withholding - tax information. I need to create new rows , and also modify others. I know that´s information is in the LFBW table, but i can´t find any bapi to update it. Any Idea?
Thanks in advance. -
Is there any Bapi to Connect to the Sql Serve
Hi ,
I have a requirement in which i want to connect to the Sql Server is there any BAPI for the same can anybody help me out .
Thanks in advance
Regards
ShankarHi.
Have you read the online documentation and searched for "native SQL". If yes, what are your specific questions?
Best regards,
Jan Stallkamp
Maybe you are looking for
-
Hi, I have a query with 2 master/detail tables joined to each other, I use a condition on a column (salesmen code) if i use SLS_CODE = 1 is much faster (since it is using the index) unlike SLS_CODE BETWEEN 1 AND 1 (since it aint using the index) OK!
-
Can anyone help me with setting up my Mac Air, to allow me to have an email template open up in Outlook instead of Mail when I click on an email address on a website?
-
Can you share apps between accounts when using the same PC
My wife and I have always shared my account. made it easy to purchase and share. Howeever, with iCloud etc its becoming increasingly obvious that seperate accounts might be needed. Can you share apps you purchase through differnt accounts when your u
-
Hi, Can I download anything from OTN without cost?Thanks.
-
I have already posed my question. I m having the latest version of Firefox and updated version of Windows 7 Professional.