Is there any function to check whether table exist in the dictionary
In the program, i want to dynamicly check whether the table exists in the dictionary, and return the result to me.
hi
good
i dont think there is any such function to check the presence of the table.
bcz you can check it directly in se11 rather than using any function.
thanks
mrutyun^
Similar Messages
-
Is there any tool to check whether the proper data is inserting or not?
Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
PraveenIs there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints. -
Is there any way to check rc.conf without restarting the machine?
Hi everybody,
I've VPS running with Arch. It was preinstalled with very, very old versiol so I've upgraded everything, updated rc.conf by hand but still never restarted completely. So my question is - is there any way to check that the server will boot up without issues? Is there any way to check that rc.conf is completely valid?peets, thanks! It seems to be ok at this point.
tomk, understood... Well, I'll paste it here maybe somebody could look throught for some possible incompability problems from old version:
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Vilnius"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=()
MODULES=()
USELVM="no"
HOSTNAME="server"
DAEMONS=(syslog-ng network netfs crond sshd nginx mysqld @postfix php-fpm @svnse
rve @pure-ftpd)
lo="lo 127.0.0.1"
INTERFACES=( "lo" "venet0" "venet0_0" )
venet0="venet0 127.0.0.1 netmask 255.255.255.255 broadcast 0.0.0.0"
rt_venet0="-net 191.255.255.1 netmask 255.255.255.255 dev venet0"
rt_default="default gw 191.255.255.1"
ROUTES=( "rt_venet0" "rt_default" )
venet0_0="venet0:0 79.98.27.163 netmask 255.255.255.255 broadcast 0.0.0.0"
The most important is to bring networking up after restart :-) last lines from "lo=..." is from old rc.conf so I'm not sure if this is compatible with newest Arch.
Thank you for help, guys!
Last edited by InfernalH (2009-06-13 15:24:37) -
Is there any functionality to check duplicate records of vendor master
Dear all,
In creation of vendor master, there is probability of creation of same vendor twice by the user by ignorance.
Do we any check in SAP so that we cannot create the vendor if that vendor already exists.
For instance, based on vendor name can we put check so that system gives error message if that name already exists.
Kindly revert back with your suggestions.
Thanks,
KumarHi,
First of all you need to have the information ,what are all the fields that needs to be checked for identifying the master data as duplicate, ie name /adress/post code/bank details.
If you put only one 'name' only for checking the master data duplication then there might be cases where the two vendors having the same name . So i would suggest take more than one field for identifacation the vendors.
Best Regards
Suresh Addagiri -
Is there any Function module available for GR IR for purchase order
Hi
Is there any function module available in SAP to get the list of Goods Received and Invoice Reciept for a purchase order.
One way to create a custom fuction to fetch the details from MSEG and BKPF.
Can somebody suggest a better solution.
Thanks in advance.
Ruhi HiraWhich table in BAPI_PO_GETDETAILS exactly has these information ?
PO_HEADER_TEXTS
PO_ITEMS
PO_ITEM_ACCOUNT_ASSIGNMENT
PO_ITEM_SCHEDULES
PO_ITEM_CONFIRMATIONS
PO_ITEM_TEXTS
PO_ITEM_HISTORY
PO_ITEM_HISTORY_TOTALS
PO_ITEM_LIMITS
PO_ITEM_CONTRACT_LIMITS
PO_ITEM_SERVICES
PO_ITEM_SRV_ACCASS_VALUES
RETURN
PO_SERVICES_TEXTS
EXTENSIONOUT
NFMETALLITMS
Regards
Ruhi Hira -
Is there any function make lwuit - List line wrapping?
Is there any function make lwuit - List line wrapping when the string is too long to display?
Please Help~
Thanks a lot.did you check LWUIT [API documentation|https://lwuit.dev.java.net/nonav/javadocs/index.html] or their forum?
-
Is there any function to automatically adjust the voice volume in the multitrack
I'm trying to mix voice sounds and music files into one track. Sounds easy! But almost every music has its loud parts(for example the climax) and quiet parts. Therefore when i listen to the voice and the music at the same time, the voice files are sometimes relatively too quiet and sometimes to loud. I don want to adjust the volume pan one part after another because I have a lot of files to mix. Could you tell me is there any function I can use to automatically adjust the voice volume to make it always 'just a bit higher than the music'? Or can I read some documents about this problem?
Thank you very much!Sounds like you want to do what is called "ducking" & "side chaining".
First try using a compressor and or limiter on the voice tracks to get a more even volume.
Google: Audio Ducking tons of stuff on how to.
I myself have never tried this with Audition, or the compressors that come with it. I have done it in other multitrack software and older versions of Dave Browns Compressor.
Duff -
Is there any function to get baseline date
Dear all,
Is there any function to get baseline date according to the payment terms?
Thank you in advance.have a lokk here:
determine due date
A. -
Is there any function module to download abap data to a word document?
Hi all,
I know that the downloading to word can be done by ole automation...But is there any function module in sap which can do the same....?? please let me know your expert comments.......Hello Rich,
I have tried the function module word_ole_formletter ..but i am facing a problem...once i execute the program i can see that the data is coming to word document but it is coming in read only mode and again reverting back to a blank document as was befor the data is coming to word document..Can you suggest where i am going wrong...Also I tried to debug the function module but the break point is not coming to the function module .... -
Is there any why to check that the reports are functioning well in Webanaly
Hi Experts,
is there any why to check that the reports are functioning well in Webanalysis?
any Help in this issue ASAP is highly appreciated
Kind Regards,
Vam-cWhat do you mean by checking whether they are working?
You can always open the report and see whether everything is working ;)
Regards
Celvin
http://www.orahyplabs.com -
Is there any FUNCTION I can use to check the existence of a USER?
Hi,
Is there any FUNCTION I can use to check the existence of a USER? I dont want to write a function by myself to access usr01 directly.
Thanks in advance.You can use FM USER_EXISTENCE_CHECK
Thanks
Seshu -
Is there any function module to get the variables used in a query?
Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
LuisHi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis -
Is there any function module to convert the date format
Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*" IMPORTING
*" VALUE(DATE) LIKE SY-DATUM
*" EXPORTING
*" VALUE(FORMATTED_DATE)
*" EXCEPTIONS
*" INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
YYYY(4) TYPE C,
MM(2) TYPE C,
DD(2) TYPE C,
END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = DATE
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas -
Is there any function module or BAPI to create maintenance item.(Urgent)
Hi Experts,
I want to create an RFC which creates the maintenance item in the sap. The RFC is going to receive data from XI. So is there any function module or BAPI to create maintenance item? so that i can call that FM in my RFC.
Thanks,
Prasanna
Helpful answers will be rewarded.Check and implement your program accordingly:
*& Report ZMRS_BAPI_DEMO_ORDERS
REPORT ZMRS_BAPI_DEMO_ORDERS.
DATA: gs_method TYPE bapi_alm_order_method,
gs_header TYPE bapi_alm_order_headers_i,
gs_header_up TYPE bapi_alm_order_headers_up,
gs_return TYPE bapiret2,
gs_numbers TYPE bapi_alm_numbers,
gs_return_commit TYPE bapiret2,
gs_demo_order TYPE objidext,
gt_demo_order LIKE TABLE OF gs_demo_order,
gt_method LIKE TABLE OF gs_method,
gt_header LIKE TABLE OF gs_header,
gt_header_up LIKE TABLE OF gs_header_up,
gt_return LIKE TABLE OF gs_return,
gt_numbers LIKE TABLE OF gs_numbers,
gt_return_commit LIKE TABLE OF gs_return_commit.
DATA lv_not_successful TYPE c.
DATA lv_ref_cnt TYPE i.
IMPORT gt_method FROM MEMORY ID 'MET'.
IMPORT gt_header FROM MEMORY ID 'HED'.
IMPORT gt_header_up FROM MEMORY ID 'HUP'.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = gt_method
it_header = gt_header
it_header_up = gt_header_up
return = gt_return
et_numbers = gt_numbers.
CLEAR lv_not_successful.
LOOP AT gt_return INTO gs_return.
IF gs_return-type = 'E'.
lv_not_successful = 'X'.
ELSEIF gs_return-type = 'W'.
lv_not_successful = 'X'.
ELSE.
do nothing
ENDIF.
ENDLOOP.
IF lv_not_successful <> 'X'.
commit changes
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = gs_return_commit.
ELSE.
rollback changes
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
return = gs_return_commit.
ENDIF.
EXPORT gt_return TO MEMORY ID 'RET'.
EXPORT gs_return_commit TO MEMORY ID 'COM_RET'. -
Finding function to check whether this employee has changed Employee group
I'm finding function to check whether this employee has changed Employee group from Temporary to Regular during the year or not.
Is there any PY function can check as above condition?
Thank youHi,
You have to read IT0001 data for reading Employee Group or Sub Group Change. Use the FM HRREADINF* to read IT0001 Data.
Thanks & Regards,
Sandip
Maybe you are looking for
-
After iOS6 is downloaded via iTunes (ver. 10.7 (21)), I am getting the message that the downloaded version of IOS 6 is corrupt on "my iphone". Check Network connection and try downloading again. Anyway have any ideas how to correct this? I updates
-
What is the role of the Email Def field in 'Password Warning Task'?
I created a custom Email Def in DC and provided its name in 'Email Definition Name' field under Parameters. But when I ran the job, that email def was not picked for sending email. Instead a notification template 'Password Warning Notification' was u
-
RSS ScreenSaver - only first 4 items in feed displayed
I've done a search but have seen so solutions to this problem. I subscribe to the BBC World News feed and only the first 4 items in the feed get shown and repeated. How to get all items in a feed presented? Thanks.
-
my isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks
-
Nzrviewer trough 3.party helpdesksystem
We have recently installed a new helpdesk system. Before we used the zenworks control center to perforf remote management of users, and everything worked fine. Now when we click the remote desktop icon in our new system it will trigger the nzrviewer.