Is there any hardware acceleration for video playback

Hello,
Nice to hear about this framework
Will there be any other new features regarding perfomance and hardware acceleration for video plaback in this new framwork?
(except the existing FullScreen harware acceleration available in flash 9 )
Thanks!
Adrian

OSMF is a framework built entirely in Actionscript 3.0, which means that it can only take advantage of those features which are enabled by the underlying Flash Player. So no additional hardware acceleration. That being said, we work closely with the Flash Player team and the FMS team, so any new features they add should find quick support in OSMF.
Brian -- Adobe

Similar Messages

Hardware FAQ's - 2. Is there any size limitation for video recording?

2. Is there any size limitation for video recording?[/b]
Yes. The maximum file size of continuous recording is 4GB (i.e. the device will stop recording after hour for HD+, 2 hours for HD, and 4 hours for VGA). This limitation is due to the file system of the built-in memory (i.e. FAT32 has a maximum file size of 4GB).Will and can this be fix with a firmware upgrade? I would like it to last atleast 2hrs for HD+? Which is it's limit with memory and or battery?

I've been told that the method size problem occurs
especially with JSPs. Again, splitting is the
solution.Is that if the code is actually "in" the jsp? What I mean is, do you still get the problem if you use <jsp:useBean ... ? (so the code is seperated from the view, like it should be)

I want to communicate with J1850 system. Is there any hardware available for this?

I would like to communicate with a J1850 system. I am wondering whether there is any hardware available for this similar to CAN. Is there a possibility to find exampls for this kind of communication.

On Fri, 16 Jul 2004 14:02:48 -0500, Mudda wrote:
> I would like to communicate with a J1850 system. I am wondering whether
> there is any hardware available for this similar to CAN. Is there a
> possibility to find exampls for this kind of communication.
I'm still new in this area but I will try to help. AFAIK, J1850 comes in
two flavors: VPW and PWM. You can purchase an adapter that converts RS232
signals to those required by J1850 for about $100.
I suggest using an adapter from Scantool.net. I say this because I
have one and it's very easy to use. It's flexible enough to use with a
terminal (hyperterminal, minicom, etc.) or to interface with LabVIEW, as I
have done for you already. Go to OpenG.org for the download:
http://openg.org/tiki/tiki-index.
php?page=On+Board+Diagnostic+-+OBDII
Let me know if it works for you. The interface is a little weak but the
VIs should clue you in on how to handle communications. I plan to add
another update in a few days so check the site regularly. I would
appreciate your feedback.
-kevin

Is there any hardware differences for iPad Wifi, depending on countries ?

My company is a large worldwide group. Our marketing team would like to distribute iPads (Wifi only) to some sales people in several countries : Thailand, Malaisia, Vietnam, South Africa, Brasil, China, Turkey, Egypt, India, Russia.
They'd like to acquire centrally, in France the iPads, to configure them and to send them in the different countries. Those iPads are Wifi only. We've heard there were some hardware differences on new iPad - 3G, depending on the country (because of the 4G support and telco operator).
Is there any dirences between an iPad Wifi sold and shipped by Apple in France and in other countries ?
- What is the case for iPad 2 : one single worldwide model ?
- What is the case for the new iPad : one single worldwide model ?

WiFi is an international standard and universal around the world. There will be no hardware differerence as far as WiFi goes regardless of where the iPad is shipped. The iPad can use 802.11a, b, g and n and so wiill be compatible with any WiFi router supporting those standards, though some routers may use security/authorization methods that will not be compatible with iOS devices (any based on Java, for instance, for authentication to the wireless network).
Regards.

Is there any Vga adaptor for the Ipad 2 that is VIDEO IN rather than OUT?

Is there any Vga adaptor for the Ipad 2 that is VIDEO IN rather than VIDEO OUT? is for a student with visual impairment who needs to view the classroom digital board content from a very short distance, like the distance to an Ipad for example, so the Ipad would be ideal as an interactive monitor with typography and content easy to amplify.
At the moment, this student has a traditional flat screen monitor taking over the table next to him, so no other child can seat in it, and he has no opportunity to befriend and sporadically joke with anybody else. So much for "inclusion".
Please do let me know: [email protected]

Speaking as a teacher ... Why can't he have a student on the other side of him?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
I haven’t been able to find any.
Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.

Thanks for the rapid response to my enquiry.
I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
Regarding QuickTime.
Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
The experience has really put me off buying any additional video from the iTunes Store.
Back to DVDs.

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

Finaly. How to enable hardware acceleration for X-

After much discussion on this form and with my friends, I've finally cracked hardware acceleration for X-FI on Vista. It works by using Alchemy on a large scale and gives acceleration for everything you listen to. The breakthrough finally came through thanx to help and info I received from alexs3ds on this thread?http://forums.creative.com/creativel...message.id=645?It started as an emulation concept discussion and evolved in to this. It gives all your 3D audio effects and EAX in games without game by game transmutation and I have noticed a large quality and volume enhancement in normal music and film audio because even that is now accelerated. Here's a step by step guide on how to do it.[color="#ff0033">?[color="#3366ff">Download Alchemy and install. Get it here .[color="#3366ff">http://preview.creativelabs.com/alchemy/default.aspx[color="#3366ff">?[color="#3366ff">Open a?window in explorer and go to [color="#3333ff">Windows\System32.[color="#3366ff">?[color="#3366ff">Locate the file dsound.dll and right click on it then select properties.[color="#3366ff">?[color="#3366ff">Click the security tab then click advanced.[color="#3366ff">?[color="#3366ff">In the advanced security panel?that opens up, click the owner tab then edit.[color="#3366ff">?[color="#3366ff">Use this to set your user account name as owner. Use the other users and groups button if you can't see your account name select your user account name using the select users pane and add it. Make sure your user account name is set as owner.[color="#3366ff">?[color="#3366ff">Next you want to change permissions in the advanced security panel so you would click the permissions tab, click edit, on the panel that pops up click add and add your user account name. On permission entry panel, click full control under the allow line. Then ok everything and close every thing down till your back at the explorer.[color="#3366ff">?[color="#3366ff">Now rename dsound.dll to something like dsound.dll.bak. ( changing owner and permissions allows you to do this ).[color="#3366ff">?[color="#3366ff">Open up another explorer window and navigate to the Alchemy directory ie C:\program files\alchemy, highlight the dsound.dll file and the dsound.ini file and copy them.[color="#3366ff">?[color="#3366ff">Paste them into the system32 folder and that's it. Reboot your computer and you are now using hardware accelerated sound. ?[color="#ff0033">IMPORTANT NOTES YOU MUST KNOW[color="#ff0033">?This only supports 6-Bit samples. You can't use 24-Bit audio samples. You can however reverse the process and regain support. The Alchemy drivers can cause a bit of choppy sound now and then if you don't configure them right. See the Alchemy advanced FAQ for info. Plus, remember they are Beta. You can however update your system as and when alchemy updates. It's not known if every game will work with EAX or 3Dsound with this. To my knowledge?all, if not?most do.You can still edit and add game settings to the dsound.ini file. For help and info in getting the best quality out of your X-FI and a list of what XP software you can install off your driver disk that came with your card refer to this thread. http://forums.creative.com/creativel...essage.id=6029?Enjoy. Edit:- IMPORTANT UPDATE?This will only work if your card is set in game mode. It will not work properly in any other mode. See my post further down this thread for more details.Also important is that I have only been able to test this on Vista 32 ultimate. It is untested in any other version of Vista. Perhaps people who have it running on other versions of Vista could post this info and help put together a list. ?
Message Edited by Sensi on 05-09-200705:20 AM
Message Edited by Sensi on 05-09-200705:20 AM

It does work, however I discovered more?important conditions. You MUST have your audio card in game mode BEFORE you do this. The reason is that the alchemy file passes the audio to OpenAL in game mode only. IF YOU TRY TO RUN GAMES IN ANY OTHER MODE YOUR SYSTEM WILL CRASH WITH BSD. IF YOU TRY TO RUN MEDIA PLAYER IT WILL HANG. IF YOU RUN DIRECTX DIAGNOSTIC YOUR SYSTEM WILL CRASH WITH BSD. YOUR?CARD MUST BE IN GAME MODE. IF YOU TRY TO CHANGE TO GAME MODE AFTER THE SWITCH, YOU WILL NOT BE ABLE TO AS THE AUDIO PANEL WON'T LOAD. DO IT BEFORE YOU SWITCH. As for windows replacing files after reboot, that aint happening to me. I've looked everywhere and can't find any sign of?were replacement files would come form either. Not that I'm saying it isn't happening, Vista is supposed to have a security system that stops you from replacing core system files. It just ain't happening in my system. However, I do have various system hacks in place and one of them may be stopping this. Need to look in to this. Fact:- I'm sitting with this in system now ( got no intentions of going back cause the audio's great ). I've tested 0 up-to date games and all give EAX etc. Without transmutation. Audio sounds amazing compared to what it was before and video audio finely plays in sync ( hurray). Maybay I should add a warning to this mod that you must only try it if you know what you are?doing.BTW in case this has anything to do with it, my system is :-
Asus?am2 with nforce 4, amd am2 x2 dual core cpu, 2 gig dual channel ddr2 800, oem?SB X-FI and Vista 32 ultimate.
Message Edited by Sensi on 05-09-200705:04 AM

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

Are there any bluetooth adapters for ipod classic to use a speaker?

are there any bluetooth adapters for ipod classic to use a wireless speaker?

I know there are a few different bluetooth adapters out there that add bluetooth hardware capability, but I'm not sure of what's available for compatible bluetooth speakers.
Here is one such bluetooth adapater.
http://www.buy.com/pr/product.aspx?sku=218214010&sellerid=30193374
B-rock

Is there any way to limit video game usage in safari???

Is there any way to limit video game usage in safari???

Parental Controls might work for you > Mac OS X: Parental Controls

Is there any OutOfBox Connector for AS/400 ??

Hi,
Is there any outoffbox connector for AS/400 ?
http://download.oracle.com/docs/cd/E11223_01/doc.904/e10452/toc.htm
Is this OS/400 connector can be used for AS/400 also or do we have to write a custom connector?
Thanks,

Hi,
OS/400 is IBM's operating system for its AS/400 and AS/400e line of business computers. OS/400 refers to Software...AS/400 refers to Hardware..
To answer your question: Yes, you can use that connector
Regards
GK Goalla

Is there any standard report for GR / IR to see as on particular date

Hi ,
Is there any standard report for GR/ IR to see as on paricular date.
please help me. points will be given.
regards,
Hari priya

Hi,
Please go to MR11.
It may help you.
Regards,
Jigar

Is there any hardware acceleration for video playback

Similar Messages

Maybe you are looking for