Is there any IDES for  IS-U?

Hi all,
Does anybody knows if there is an IDES version for the IS-U SAP solution?
If Yes, which one is the current version? and Could you help me to find out about the minimum hw requirements to install it (in a Windows platform: CPU,RAM and Hard Disk)? Would be just IDES without any more data.
Thanks!
Jessica.

There is no IDES for SAP IS-U.
There are, however, Best Practices for IS-U, which might help you. Check help.sap.com under SAP Best Practices.

Similar Messages

  • Is there any IDE for compiling/debugging FlasCC apps?

    I want to use FlasCC for a large project, but I have no experience with GDB. Is there an IDE for FlasCC out there so I can do the compiling/debugging things (mostly debugging)? Or could anyone tell me how to configure one (like eclipse)?

    Since all iTunes content, with the exception of purchased ringtones, can be re-downloaded for free, your apps are already available from the "cloud" so to speak.

  • Any idea for high display resolution in application sharing server ?

    Hi.
    I installed EP6 SP 13 with KMC and configure collaboration feature.
    I tested application sharing and It works.
    Then, I found problem.
    Problem is that application sharing server doesn't support 1400x1050 display resolution. (only works till 1280x1024)
    Is there any idea for solving this issue ?
    Regards, Arnold.

    Hi Arnold,
    I'm afraid this screen resolution is not yet supported. The official supported screen resolution is 1024x768 ! but as you stated it <b>can</b> work wit 1280x1024. You could open an OSS ticket and ask the KM Development for plans on supporting higher resolutions in application sharing and let us also know.
    Hope this helps,
    Robert

  • Is there any tool for developing Postscript code ?

    Hi Friends,
    Is there any tool for developing Postscript code ? (or)
    Is there any IDE for Postscript ? (or)
    Thanks & Regards,
    Navaneeth Sivappan

    Hi Navaneeth,
    > is there any tool for developing Postscript code ?
    An interpreter (GS or Dist), an ascii text editor and your PS skills ;-)
    > is there any IDE for Postscript ?
    Take a look in this Sourceforge project...
    http://sourceforge.net/projects/wxghostscript/
    ...is a Ghostscript debugger.
    MaRC anToni Malagarriga i Picas
    T·(34)938721642 | (34)667517069
    (][ www.femfum.com
    PostScript&PDF Tool Developers
    Desenvolupadors d'Eines PostScript i PDF

  • My source audio isn't importing. Any ideas for how to fix?

    The audio is there. I've watched it in VLC, and the audio is there. Whenever I import the footage, though, it goes missing. Any ideas for how to fix it?

    Welcome to the forum.
    First, more information would be useful. See this FAQ Entry for what info will help: http://forums.adobe.com/thread/961741?tstart=0
    Also, when you Import your AV file, do you allow PrPro time to Conform the Audio portion? For more info on Conforming, Indexing and PEK file creation, see this article: http://forums.adobe.com/message/3892177#3892177
    Good luck,
    Hunt

  • When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    I too have the same problem.  The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video.  Apple needs to fix this!!!!!!!!!!!!!!!!   its a joke,  my iphone is all messed up after the last update as well.  at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues.  Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!,  there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem. 

  • Is there any Bapi for Physical Sample creation

    Hi Folks,
    Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a  physical sample......
    Any ideas or suggestions would be appreciated..
    thanks
    chaithanya.

    HI Chaitanya,
    You can use : BAPI_BATCH_CREATE
    it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
    Regards,
    -Venkat.

  • Is there any BAPI for BOM creation? which does by RCSBI010 / Batch Input.

    Hi Experts,
    I need to Upload the extracted Excel-file(.txt) for BOM creation, so, pls, let me know that, Is there any BAPI for this purpose. In detail the requirement is that,
    The suggested idea shuld work as like as pgm. RCSBI010
    thanq
    Edited by: Srinivas on Feb 14, 2008 6:18 PM

    Hi Srinivas,
    Try these Function Modules
    CS_BI_BOM_CREATE_BATCH_INPUT   - Create BOM Via Batch Input
    CS_BI_BOM_CREATE_BATCH_INPUT1  - Create BOM Via Batch Input (Corrected Session Handling)
    There are two BAPI's too, which can be used
    ALE_MATERIAL_BOM_GROUP_CREATE
    BAPI_MATERIAL_BOM_GROUP_CREATE - Creation of a material BOM group
    Hoe this helps.
    Edited by: Priyabrata Samanta on Feb 15, 2008 3:56 AM

  • I was thrown in the pool with my phone in my pocket.  I was in the pool for a minute or two.  I got out dried it off and stuck it in rice.  Is there any hope for my hope?  If not, is there a way to fix it?

    I was thrown in the pool with my phone in my pocket.  I was in the pool for a minute or two.  I got out dried it off and stuck it in rice.  Is there any hope for my hope?  If not, is there a way to fix it?

    alanfromwickford wrote:
    just to add, i'd remove the back case to allow mor rapid drying, but expect the wosts - because it's less disapointing if you then lucky
    What a colossally bad idea!  To anyone reading this thread DO NOT DO THIS!!!  Once anyone other than an Apple Authorized Service Provider (and that doesn't automatically mean your carrier, just FYI) opens up the device, then ALL options from Apple are gone, permanently.

  • Is there any support for my iphone 3g?

    my iphone 3g is broken for a months ago and is there any doubts for me to send it to apple for fixing?

    Apple does not repair phones, they replace them. If the phone is under warranty and has a defect, they would replace it for free, however with a 3G, being out of warranty, the out of warranty replacement is $149/US. It may be a better idea and cheaper for you to Google a 3rd party repair service in your area that would probably do it a lot cheaper. The advantage to the Apple out of warranty replacement is that it will have a 90 day warranty on it.

  • Is there any way for a basemap to be manipulated from the client side?

    Hello,
    Essentially, we have a basemap (+basemap A+) that contains boundary geography (i.e., county, tract, block boundaries) and we have a theme (+theme A+) that contains housing unit points.
    The idea is that theme A will be a layer that the user will be able to switch on/off. We know how to do this, but the problem comes in where performance is concerned.
    Previously, theme A was actually included in basemap A, and performance was not an issue, but the problem then was that the user was not able to turn that layer on/off.
    Also I have done everything I know in terms of caching as well as using the mapviewer API
    (e.g.,
    test_theme.setClickable(false);
    test_theme.enableInfoWindow(false);
    test_theme.enableInfoTip(false);
    test_theme.enableLabels(false);
    test_theme.enableAutoWholeImage(true);
    test_theme.setMinVisibleZoomLevel(5);),
    but rendering the theme on the client side is still way too slow (even at zoom level 5).
    So, my question boils down to this. Is there any way for a basemap to be manipulated by a user? I.e., Is there a way for a user to pass parameters to a basemap, essentially telling it which themes to turn on/off?
    I know you can specify which zoom level the basemap's themes are visible, but again, we want the user to be able to have control of when a certain theme is shown or not.
    Thank you for any help you can provide,
    John
    Edited by: user641525 on Mar 18, 2009 10:29 AM
    Edited by: user641525 on Mar 18, 2009 10:30 AM

    What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
    thanks
    LJ

  • TS1362 Everything works except the **** thing won't play. I push the play arrow or instruct it to play and it stays eternally paused. No problem buying things from these dogs,just can't play the when everthing pops up on screen.Any ideas for a hopeless ol

    Everything works on ITunes except play function.I can select as song I want but cannot get it off "pause."I tried going to controls and instructing it to play(no go) and clicking again and again on play arrow(which flips it to pause...).Any ideas for a very old,very frustrated non-tech guy???
    Please!! Thnaks!!!

    Replying to myself. Kept trying different areas of the ipod this evening, clicking various buttons, including some I'd never used before. All of a sudden I could see my Nano in iTunes. I quickly clicked on Restore before iTunes changed its mind about recognizing the iPod. Moved some songs onto it and it appears to be back to normal.  Keeping my fingers crossed. 

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

    Hi Experts,
    In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
    Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
    thanq

    hi
    check these links out
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    regards
    vijay
    reward points if helpful

Maybe you are looking for