Is there any Tool for successfully migrating the Infopaths data connection from old URL to new URL?

Hi Support,
In my Project we are trying to migrate sharepoint 2007 Infopaths to sharepoint 2013 Infopaths(there are some 20000 infopaths).Here we want to change the Data Connection from old to new connection.
So please let me know if there is any tool to migrate sharepoint 2007 infopaths data connection to sharepoint 2013 infopaths data connection.
Thank You in Advance for your help.
Regards,
Pradeep

Hi Pradeep,
As far as I could search, there is no built-in feature to batch updating InfoPath forms, I’d suggest you consider script or third party tool. Here are the links that might help:
http://sharepintblog.com/2011/06/07/updating-infopath-form-templates-and-data-connections-with-powershell/
http://www.dotnetfunda.com/articles/show/2829/migrating-infopath-2007-form-to-2013-forms
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

  • Is there any tool to check whether the proper data is inserting or not?

    Hi,
    We have different products A,B and C.
    whenever user crates an account under these products some X,Y,Z table gets updated.
    If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
    If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
    p.s : if this thread is not related to this forum .. where can I post?
    Thanks,
    Praveen

    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
    If you want to restrict the columns to specific values then you can use constraints.

  • Secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    Hold down Option key while clicking on menu bar and Save as will appear.

  • Is there any list for out of the box portlets that come with portal installation.

    Is there any list for out of the box portlets that come with portal installation?
    Ramesh

    Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
    Portlets Created Upon Install
    The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
    Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
    General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
    Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
    Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
    Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
    The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
    Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
    Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
    You can also install the following functionality as part of the Optional Enterprise Web Components:
    [url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
    [url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

  • Is there any tool for developing Postscript code ?

    Hi Friends,
    Is there any tool for developing Postscript code ? (or)
    Is there any IDE for Postscript ? (or)
    Thanks & Regards,
    Navaneeth Sivappan

    Hi Navaneeth,
    > is there any tool for developing Postscript code ?
    An interpreter (GS or Dist), an ascii text editor and your PS skills ;-)
    > is there any IDE for Postscript ?
    Take a look in this Sourceforge project...
    http://sourceforge.net/projects/wxghostscript/
    ...is a Ghostscript debugger.
    MaRC anToni Malagarriga i Picas
    T·(34)938721642 | (34)667517069
    (][ www.femfum.com
    PostScript&PDF Tool Developers
    Desenvolupadors d'Eines PostScript i PDF

  • Are there any tools for data encryption and decryption ?

    Hi,
    i am using oracle 9i R2, i want encrypt my data. Are there any tools available in market.
    Please let me know the ways to do data encryption and decryption.
    Thanks in advance
    Prasuna.

    970489 wrote:
    using DBMS_OBFUSCATION_TOOLKIT.Encrypt /DESEncrypt we can't secure our password...So i am looking for an another alternative.As Blue Shadow said, what are you really trying to achieve?
    Encrypting a password is itself not secure. Anything that can be encrypted can be decrypted. That is why Oracle itself DOES NOT encrypt passwords.
    Surprised??
    Here's what Oracle does with passwords, and what others should be doing if they have to store them.
    When the password is created, the presented password - clear text - is concatenated with the username. The resulting character string is then passed through a one-way hashing function. It is that hashed value that is stored. Then when a user presents his credentials to log on to the system, the presented credentials are combined and hashed in the same manner as when the password was created, and the resulting hash value compared to the stored value.

  • Is there any tool that can display the internal structure of a F4F file?

    Dear all,
    I want to view the internal structure of an f4f file, Is there any tool that I can use to do that?
    Thanks,
    Xuedong

    check the table AUFM (Goods movements for order)
    pass inputs to all the key fields.
    and another table AFPO
    try to use these tables.
    regards,
    sateesh.

  • Is there any Tools for Code coverage for SQL Azure Database projects

    I need to capture data base code coverage for all the manual and automated test. this is for Azure DB, is there any tools available for the same? Please advise

    Hi,
    In order to code coverage for SQL Azure, use Microsoft Test Manager.
    This Link helps you in understanding and step by step procedures for manual testing.
    http://msdn.microsoft.com/en-us/library/vstudio/hh698492(v=vs.110).aspx
    Along with the above link also refer to
    http://msdn.microsoft.com/en-us/library/jj156172.aspx
    http://msdn.microsoft.com/en-us/library/jj156144.aspx
    Girish Prajwal

  • Is there any way to find out the serial number to an old ipod that i cannot find?

    theres a recall on the od ipod nanos the 1st generation ones and i purchased one and im not sure when and currently i am unaware of the whereabouts of the ipod. is there any way to find out the serial number without actually finding the ipod to confirm when i purchased it? thank you any help will be appreciated.

    iPod: How to find the serial number

  • Is there any tools for move messages from errorqueues in WLS 8.1.5?

    Hello!
              I have created a JMSDestination (MyQueue) in my wls 8.1.5.
              I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
              In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
              If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
              If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
              Very nice!
              But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
              Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
              Best regards
              Fredrik

    Have a look at this
              http://www.hermesjms.com/confluence/display/HJMS/Home
              We use it and it works very well for handling messages on error queues.
              Some messages we automatically re-queue using a modified version of this
              code here
              https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S134/eventsubmit_dosetissueview/foo/resultpos/1/nbrresults/285/action/ViewIssue/tab/2/readonly/true
              Hope that helps.
              Pete
              Fredrik Andersson wrote:
              > Hello!
              >
              > I have created a JMSDestination (MyQueue) in my wls 8.1.5.
              > I have also created an other JMSDestination (MyErrorQueue) in my wls 8.1.5.
              >
              > In the wls it is possible to specify an "Error Destination:" for a JMSDestination. In my wls I have specified MyErrorQueue as error destination for MyQueue.
              >
              > If anything goes wrong during consuming message from MyQueue the message will be moved to the error destination MyErrorQueue.
              >
              > If this situation ever occur, for eg. there is a cable connection loss or something. The error destination will save me alot of trouble.
              >
              > Very nice!
              >
              > But now I wonder if there is any tool or function i wls 8.1.5 that helps me move the message back to MyQueue from the error destination, MyErrorQueue, when the problem is solved.? For eg, when the broken cable is replaced.
              >
              > Or do I have to write such a application my self? Seems strange since the concept of error destination exists.
              >
              > Best regards
              > Fredrik

  • Are there any tools for optimizing placement of Airport Base Station

    I have both a Airport Extreme B/G and a Airport Extreme N unit. I also have several Airport Express units on the network. Does any one know of any tools (Hardware or Software) that can be used to identify the best physical placement of Airport Units in a multi-story building. I need to find where the connections are breaking down and where the dead spots are located. My network works but has random problems and now that I have an Apple TV the problem is worse. If I cluster everything together in one room it works like it should. Once I place the units where I need them it breaks down.
    There must be some tools that are available that can assist in the physical placement issue.

    You can use something like AP Grapher to determine where wireless network coverage is working well.

  • Is there any tool monitoring messages in the pipeline?

    I wonder whether there is a tool which can tell the time each queue spends in each step of the pipeline?
    e.g. how much time a queue spent on client determination, on xml conversion, ...
    Thanks!

    I wonder whether there is a tool which can tell the time each queue spends in each step of the pipeline?
    Pipeline step means the Receiver Determination, Interface Determination etc.....so you can find this time in SXMB_MONI itself.
    SXMB_MONI --> Open Message Processing entry --> Performance Header --> Under Performance Header --> SAP:Timestamp --> For every step you will have the respective timestamp......I think the value after decimal indicates miliseconds (not sure on this part)
    Regards,
    Abhishek.

  • Is there any API for pushing update patch related data from qualysguard in SCCM database?

    The problem is that, my company want to integrate SCCM with qualysguard. The qualys will scan for missing patches and will generate a patch report. From this patch report
    required data will be extracted and pushed into the SCCM database.I have sorted out the issue of extracting data from qualys, but I am stuck up at the point of pushing patch data in update repository. I tried searching for some API which could push data in
    database of SCCM, but unable to find. I thought of making my own script to run the sql query but this will ultimately screw the database of SCCM since there may be 60-70 table dependency.
    Please suggest any SCCM API which can help me to push data in its database(particularly in the tables interacting with the update repository). 

    We had looked into doing something similar, and this post is the closest we found.
    https://community.qualys.com/thread/11816
    Basically you will need a middle-man between Qualys and ConfigMgr to house the data. This may be a new database, or a whole seperate platform. I expect this could easily be done with SQL and SSRS.
    Also note, database edits to the ConfigMgr database are
    not supported  by Microsoft, I would recommend using a central system to pull data from Qualys and ConfigMgr without modifying either.
    Daniel Ratliff | http://www.PotentEngineer.com

  • Is there any solution to getting around the icloud problem? Someone suggested putting in new apple id? Does that help? I need my email!

    Is there any solution? Can we make a new apple id and then sign in? Does anyone have any idea how to get around this? INSANE that apple has no further information or communication for it's loyal users.

    Here is some information on the applecare +:
    http://www.apple.com/support/products/iphone.html
    It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

  • Is there any Function Module will give the Transactional data of a cube?

    Hi Experts,
    I have one Infocube Zco3_BILT , I need to write a routine (BADI Program)on top of this info cube  to fetch a characterstic value in the infocube.
    F table  & Etable wont give any characterstic values.
    Is There any SAP provided FM to give characterstic values of the Infocube.
    Thanks in advance.
    Regards
    Mohan

    Hi Mohan,
    this is correct since the values are stored in different tables (fact, dimension etc) due to star sheme modelling. As far as I know there is no standard function module for this issue.
    However ABAP report RSDD_SHOW_ICUBE might help. This is the report for transaction listcube, all relevant data is build up, there you should find all necessary steps and standard reports/modules to fetch the required characteristic value. Although I do not know the exact requirement you will probably have to work with SID values.
    Perhaps this will help resolving your issue.
    Best Regards,
    Marcel

Maybe you are looking for