Is there any User Exit or BADI- Where LTAP-WDATU is as change parameter ,So during or after Transfer order creation GR date would be as per given logic not as current date
Dear All,
There is a requirement in which when the material (Not batch managed) is getting return from Non WM managed storage location to WM managed storage location than at the time of creating transfer order or after creation of transfer order would like to change LTAP-WDATU (GR date) automatically , So here i am unable to find the right user exit or BADI in which i can write the logic for same. Below is full description of the requirement.
Here we are following Removal strategy "FIFO" while picking the material (Not batch managed) from WM managed storage location (WMS1) & transferring to Non WM managed storage location (ODS) ( than from there it use to go to Production) , at certain times partial quantity use to come back from Non WM managed storage location (ODS) to WM managed storage location (WMS1) and while doing putaway of the same "GR date" use to change which was not the actual when the material 1st time comes to WM managed storage location (WMS1) (before getting transfer to Non WM managed storage location). So here i want the user exit or BADI in which i can write my logic so that GR date ( LTAP-WDATU) would automatically change while creating transfer order or after creation of transfer order as per the "GR date" of same material which last moved from WM managed Storage location (WMS1) to Non WM managed storage location(ODS) because as per FIFO material dated before that would not be exist in the warehouse.
Below is the flow of the material while transferring to production & returning from production.
WMS1 ( WM managed warehouse ) --> ODS ( Non WM managed warehouse) --> Production At the time of issue to production
Production --> ODS ( Non WM managed warehouse) --> WMS1 ( WM managed warehouse ) At the time of return from production
I hope i m clear on my requirement.
Thanks in advance.
1. You have to get a key from SAP to modify the two includes in which the user exits are present.
2. You have to enter statement 'INCLUDE z**. ' in both user exits in the MV45* includes. Then save and activate the MV45** includes.
3. You have to figure out the code that carries out the functionality described in your specifications.
3. Write the code in includes Z** .
4. Now the code written by you will be executed when you run the relevant SD transaction
Message was edited by: Sudhir Bhate
Similar Messages
-
Is there any user exit or BADI
Hi ,
Is there any BADI or userexit which will update some fields in BSEG while posting Invoice verification(MIRO). Please advice.
Regards,
Sam.Hi,
following is the list of user exits available in MIRO.
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
BADI : INVOICE_UPDATE
Hope this helps.
Reg,
Hiren PAtel
Don't forget to Reward points. -
Is there any user exit/ badi to populate the partner bank type for F-63.
Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ZFI_FOAP_CDITEMS_00001011 having BKPF and BSEG as only import parameters so I cant change the value for BSEG-BVTYP.
So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
Thanks in Advance,
Steevanhi,
Below r the user exit related to transaction F-63.
Check out if any of them will solve ur Query..
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Reward points if helpful,
Regards,
Brijesh -
Is there any user exit in CRM_MKT_JOB_WIZARD
Hi All,
Is there any user exit in function module CRM_MKT_JOB_WIZARD? We have a requirement, where user selects 'Immediately' while scheduling job, but still it should be pooled and run over night.
Thank you,
Regards,
Rajesh.Hello,
There is a very easy way to find any BADI setting a breakpoint in class CL_EXITHANDLER.
Everything explained here:
How to find out the BADI triggered in transaction crmd_mktseg?
Regards,
Nicolas Busson. -
Is there any user exit in IW54 before document saving?
Dear experts,
Is there any user exit in IW54 before document saving? I want to check some data before saving.
thanks
LanceOr BADI NOTIF_EVENT_SAVE (Change When Saving Notification)
PeteA -
Are there any user exit for ess travel?
Hi all
I want to ask,
are there any user exit for ess travel?
and if I want to know if we already had enhancement for back-end system (sap gui)
is it automatically applicable to ess too?
many thankscheck this
ESS: BAdi for Checking Mileage
Thanks
Bala Duvvuri -
Is there any user exit after saving the material doc
Hi,
Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
thanks,
lanceHi
Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
Regards
Ramakrishna -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco -
Any USER EXIT or BADI for modification in ME21N Asset Creation
Hi Guyz,
We have a requiremnt where we need to put some validaion/check in Asset Creation of ME21N,
Any possible BADIs or USER EXIT available for this modification.
Pease help.
Thanks
JaifHi Jaif,
For BADIs please go to SE24 put cl_exithandler diplay it and put the break-point execute the transaction for which you want to find out badi you will get the badi name in exit name parameter.
Regards
Sagar -
Is there any User Exit to update the SGTXT of table BSEG while doing F110
Hi,
I have a requirement of updating the item text of BSEG table while doing the payment run with transaction F110. Anybody tell me the user exit name if there is any.
Thanks,
srinivas.I responded in your other thread as well...
I suggest you to make use of BTE 00001120. You can find documentation
for the usage of this event in transaction BERP, enter process
interface 00001120 > execute > Keep cursor on the event 00001120 and
then click documentation.
Hope that helps,
Jon -
IS there any user exit when finish MIGO?
Hi,
I want change the material price when post goods using Migo,I find several exit,but It locked the material,I can't change material during this time,is there any exit after posing goods, or is it possible to call another program after migo?
Thanks in advance.
LanceDear Lance,
Do you already check for : ZXMBCU01-ZXMBCU03
Also in IMG path : MM>Inventory management and PI>Maintain customer exits and Business add-ins.
Regards,
w1n -
Is there any user exit to change the UOM of a material while creating sales
Hi experts,
I have a requirement to change the UOM of the item material in sales order while creating. Could anybody help me in finding the correct user-exit to change the UOM.
Thanks,
srinivas.Hi Ravish,
I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP". But it is again over writing in the standard program. What I need to do, to remain same UOM.
Thanks,
srinivas. -
User Exit or BADI in APO to change sales order relevant data while CIF
Hi Everyone,
I require User exit or BADI at APO side to change customer field kunnr of sales order after it enters APO through CIF.
My requirement is to replace KUNNR field with KDGRP field of sales order.
The data will pass through CIF in APO.
Is there any user exit or BADI for the same?
Sample code will be of great help.
Regards,
Kashyap.Hi ,
Resolved myself.
customer exit APOCF010
Regards,
Kashyap -
User-Exit or Badi for dangerous goods - master data
Is there any user-exit or BADI we can use while changing or saving dangerous goods?
We want to do a copy on other dangerous goods immediately after the change or creation of the dangerous goods master data.
But I can't find an user-exit which can be used before the changes are saved.
Can anybody help?
Thanks!Hi,
Please check SAP enhancement DG100001
You can use this SAP enhancement to define a customer exit to write change documents for dangerous goods master data and packaging data.
The customer exit is in the function group XD10. It is called from the function DG10_CHANGE_DOC_USER_EXIT.
If the system does not find a customer exit, a standard document description is called. This is stored in the include LDG1NU03
Hope this will solve your problem
Regards,
Keshav -
User exit or BADI for MIGO to Update a field in MSEG-KOSTL
Hi,
I want to update/change the KOSTL (Cost center) value before creating/posting the document.
Please let me know is there any user exits or BADI, which will export the MSEG structure.
Regards,
GaneshHi
I believe there isn't a BADI or EXIT allows to change item data, I usually use the exit to change the item text EXIT_SAPMM07M_001 (the BADI MB_MIGO_ITEM_BADI should be the same thing) where I change the data by field-symbols:
FIELD-SYMBOLS: <KOSTL> TYPE MSEG-KOSTL.
ASSIGN '(SAPMM07M)MSEG-KOSTL' TO <KOSTL>.
<KOSTL> = .......
Max
Maybe you are looking for
-
How do I change the phone number associated with messages on my Mac?
My computer is posting messges meant for my wife. How do I delete her phone number from my iMac Messages?
-
Webservice development in Webdynpro
Hi, I want to develop a webservice in webdynpro for consuming BAPI(BAPI_MATERIAL_AVAILABILITY). Can someone provide me the related document to reach this requirement? Thanks, Kundan
-
Help on XML output challenge needed
Hello, I need some help on getting different data from different relational tables into one XML output. Fe: I have 3 different sql queries with no strait relation. Now I want this as a xml document. How can I create a generic method to convert this i
-
¿Is it possible to hide a list in service request customized form?
Hi all. I've created two custom lists in authoring tool to the service request form. My question is : ¿ Is it possible to hide one or both ? Tks. Regards.
-
I'm working on a project with a database where database entries are deleted logically (a column deletets is set to the current time). How can I handle this with JDO/Kodo? Requirements: 1. Records with a deletets != null must not be read. Is there a g