Is there any way to darken the gridlines in iCal?  I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

Is there any way to darken the gridlines in iCal?  I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

Similar Messages

  • Is there any way to lock the HDMI display on one desktop?

    Hello!
    My Macbook Pro HDMI-connection to my TV works great -- the only thing I wasn't able to figure out is if it was possible to lock the HDMI display on one desktop. I use five different desktops (spaces) and I'm using extended desktop(s) for my HDMI, but every time I switch to another desktop, whatever I'm watching on my TV switches to the extended desktop for whatever space I just switched to, meaning that my TV switches to blank screens. Is there any way that, even if I continue switching through desktops on my computer, I can keep my HDMI locked on the extended space for "Desktop 1," for example?
    Hope that makes sense. Thanks!
    -Ryan

    If you disable the "Change with buttons" setting, the buttons will still control the general volume (music, games, etc) but will NOT change the ringer or alarm sound settings (keyboard clicks also fall into this category but is not mentioned). This lets you use the volume up/down buttons to change the general volume level without changing the ringer and alarm volume levels...it keeps you from inadvertently turning down the ringer or alarm volume and missing calls and alarms.
    That being said, there's no way to totally disable the volume up/down buttons from doing something volume related.

  • HT6312 Unfortunately I updated to iCloud drive without reading this page! Is there any way to un-upgrade as it were to keep using my ios7 device and mavericks?  thanks

    unfortunately I updated to iCloud drive without reading the consequences.  Is there any way to un-update this....I still need to be compatible with ios7 and mavericks on my other devices, thanks!

    Sorry, no. The only way to restore this note is to restore from a backup that contains it.

  • Is there a way to darken the dates (numbers) on ical. After installing Lion I can barely read the dates of the month in ICal

    Is there a way to darken the dates (numbers) on the ICal calender. I can barely read mine after installing Lion.

    I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

  • Is there any way to prevent the OS from querying the Superdrive when start

    Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

    Is there any way to prevent the OS from querying the Superdrive when start
    No
    he OS queries the drive slot to see if there is a disc present.
    How can you tell? Based on the noise it makes?

  • Is there any way to retreive the FileName in the mapping

    Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
       I am using the adapter specific message attributes in the file sender CC.
    Thanks,
    Ravi
    null

    Yes you can retreive it.  Create an simple user defined function in the mapping and use the following code.
    Imports: com.sap.aii.mapping.api.*;
    Parameter: String filename
    Paramter: String filename;
    filename = fileName + ".DAT";
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    conf.put(key, filename);
    return filename;
    Or
    Just do whatever mentioned in this weblog:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    ---Satish

  • Is there any way to repeat the last action on a new selection?

    I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

    Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
    I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
    Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

  • Is there any  way to Mask the Name when  a select statement is issued?

    Dear all,
    Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
    e.g if Name: CHIEV SONG MEE
    If user issue a statment select * from customers;
    The Result Should come something Like this:
    Name
    CHXXV SXNG MXX
    Thank You

    user3029023 wrote:
    but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
    For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
    Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
    If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
    No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
    It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

  • Is there any way to identify the particular socket connection is closed ?

    Is there any way to identify the particular socket connection is closed or not ?
    Any methods ???
    How can the program knows the connection is lost or some thing ...
    Is the socket throws some excpetions when there is no active connection ???
    namanc

    If you get an IOException when you try to use the socket, the connection was obviously closed.
    The correct way for an application to know if the socket was closed is:
    1) the server sends a message indicating that the socket should be closed
    2) the client closes the socket itself

  • I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines.  Is there a way to darken the lines before using the image trace tool?

    I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines.  Is there a way to darken the lines before using the image trace tool?  Help!

    If the scan is in B&W, then play with the Threshold setting here
    If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All,
    I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
    I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
    I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
    Is there any way to get the height/width of image without importing it in the indesign document.
    Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
    At this point I am clueless where to search next.
    Any help will be appriciated.
    Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
    Thnx,
    D.

    You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
    Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
    For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
    Perhaps Quicktime could provide you with a platform independant solution.

  • Is there any way to specify the default version of LabVIEW?

    I have a sinking feeling that the answer to this question is "no."  With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here.  When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8.  I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.

    eaolson wrote:
    I have a sinking
    feeling that the answer to this question is "no."  With more than
    one version installed, is there any way to set the default LabVIEW
    version for opening a VI? I have both 7.1 and 8 installed, and usually
    only use 8 to open an example or look at something posted here. 
    When I do that, it resets all the OS hooks so that the default action
    for opening a VI is to open it in version 8.  I've even gone so
    far as to create actions to open files in 7.1 and 8, but it always
    resets my default action.
    I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
    Ugh. I hate it when software thinks it knows what I want better than I do.
    Add
    in the LabVIEW.ini file of those versions you do not want to rewrite
    the registry on startup to point to themselves for VI files, the
    following:
    RegisterExtensions=False
    Of course the VersionChooser utility mentioned earlier is even more convinient.
    Rolf Kalbermatter
    Message Edited by rolfk on 06-28-2006 08:21 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is there any way to set the default for *.doc document so that Pages opens them automatically?

    I have a number of Ms Word documents because I used to have Word for Mac before the last OS release.  Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
    Now Pages will open these files.  Is there any way to change the default for *.doc files so that a double-click will open them in Pages? 
    (Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

    Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
    Walt

  • Is there any way to make the sent folder in mail list emails "to" instead of  "from"

    Is there any way to make the sent folder in mail list emails in the "to" order instead of  "from".

    Sure open Sent folder.
    Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
    Click on the arrow and select "To" from the list.
    Allan

  • When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    No problem.
    This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
    You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on.

Maybe you are looking for