Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Similar Messages

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

That exclamation mark is displayed when iPhoto cannot link to the original file. First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
Click to view full size
If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

I sent iTunes to trash. I was able to recover the program but have to "put back" songs one at a time. Is there any way to put back from trash using the "select all" command?

I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.

The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?

HT3554 Is there any way to enable my iMac to use an external mic after I have found that it is not compatible? Via some kind of device or upgrade?

I'm trying to use my Apple headphones a mic on GarageBand. After about an hour of researching, I've found that my iMac (Mid 2007) is not compatible with an external audio input/microphone. Is there any way I can make it so I CAN do this, maybe by installing some kind of software or doing an update or something? I'm a song recorder on a budget so these headphones are all I got for a mic. PLEASE HELP!!!!

AckFun wrote:
Ok so should I buy a USB mic then?
Check out the mics at Apple's Online store by clicking the store tab at the top of this website.

Is there any way to listen to music WITHOUT using the speakerphone or headphones?

I listen to streaming talk radio in my car, I usually have drive to and walk in and out of several office buildings throughout my day. I would like to be able to just put my BB up to my ear and pretend like I am listening to someone talk on the phone, when I'm really listening to the radio. Is there any way to do this? I hate having to fumble around with headsets every time I stop, and obviously I cant walk through a office building with the loud speakerphone/built in speaker blasting.

Sure there is.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there any way to create a circular buffer using the INSERT ARRAY function?

I saw the example using the REPLACE ARRAY function, but it uses too much CPU power on my laptop. I'm using it for a very sensitive application and saw that the INSERT ARRAY function used much less CPU power.
I am also not wiring the index on the INSERT ARRAY function so that whatever is read from the buffer is added to the array.
However, since it is not indexed, I don't know how to set the "write" index back to 0 when it reaches a certain sized array (ie 1000 elements). I was looking for an array property node, but couldn't figure out if one exists for the "current write index".
Can anyone help?
Thanks

I will try to answer this question to my best understanding. I apologize if I interpreted the question wrong.
You are using the "Insert Array" vi without wiring the index. By doing that, new elements will be added (appended) to the array.
If you just want to know the current index to stop your acquisition when the array reach certain amount of elements, then you can use the "Array Size" vi to keep track of the size of the growing array. Remember that Array Size = last index + 1 because the index start at zero.
A second option is that you may want to start over the array when it hits the maximum number of elements that you will allow. If that's the case, then you may want to re-initialize the array to a NULL state by stablishing a condition (for example, when the
size of the array is 1000, re-initialize). I provided an example attached to this message showing how this can be accomplished. In the example, an 1D array grows in size using the "Insert Array" vi and inserting a random number. When the array reach 4 elements, it is re-initialized. You can expand this example by saving the array first to a file or some other holder before re-initializing the array. The example is in LabVIEW 6.
Finally, if you want to replace the current values with new values, I think you do not have other choice but to use the "Replace Array" vi.
Hope this can be of help.
Regards;
Enrique Vargas
www.vartortech.com
Attachments:
array_example.vi ‏20 KB

Is there any way to track a stolen laptop using the mac address, or by triangulating the wifi, or even by checking to see if the macbooks serial number has been registered online anywhere?

A little info on my question,
I had it stoeln on June 22nd 2013. I had recently bought it so had not installed any software on it nor did I have registered with icloud. I had contacted police, registered it stolen with Apple (but then just discovered this week that apple do not have a database for stolen products, which makes no sense at all).
I have contacted all the major pawn shops and computer stores in town etc etc. I have recently discovered that each laptop has a unique MAC address whcih begs the question, is that traceable somehow? I have been made aware that the router strips the mac address before it connects it to the internet but does the isp log the laptops MAC address? If i contacted all the major isp in my country would they have the ability to search for the mac address of my latop and then link that with an ip address?
Any help would be great please!

karlgporter wrote:
Yeah but I registered it stolen with Apple first thing, then called local police etc. Apple told me on the phone that the serial has been logged as stolen, which I assumed would limit the computers use online.
Every machine has a unique serial number what I was getting at is there must be some way to track the serial number and for example if the theif logged onto facebook using a stolen machine, if there were a register of stolen equipment then red flags would pop up, you know what I mean?
Well, I hadn't heard of that before. If it's true, then what you say should also be true but the Mac would have to publish its hardware serial number over the Internet and I haven't heard of that either. The only Apple tech that is supposed to constantly track you is iCloud.
You said you assumed the database would limit use online but if that's only an assumption, you need to ask Apple what exactly the stolen database does. It is possible that the serial number might only get flagged if it comes into an Apple Store for service, if it ever does. You need to clarify this with Apple.

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa

I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

Have you been having some problems that make you think you may have malware installed?
Download and run Etrecheck. Copy and paste the results into your reply. Etrecheck is a diagnostic tool that was developed by one of the most respected users here (and recommended by Apple Support personnel) in the ASC to help identify the more obvious culprits that can adversely affect a Mac's performance.

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to overclock an A64 by adjusting the multiplier?

Is there any way to overclock an A64 by adjusting the multiplier?
I have an Athlon64 3200+ (Socket 754) and a MSI K8T Neo-FIS2R.
Seems to be a sweet overclocker, but my RAM cannot run at much more than the normal 200 (400) MHz, so FSB overclocking is no good for me.
/Salmoneus

hmm the a64 is locked so you cannot use a cpu multipier to have only cpu go faster..
i oc with the fsb....but noticed that i may actually be over running my power, at high oc's(233) if i unplug at least 3 hard drives, and some fans it will run microsofts memmory tester...but not with them in.
you may be able to oc if you drop your mem speed down in bios to 333 or 200.
so when you oc the memm will clib from there...i have seen good results from that.
one person was able to catch my 232 results from dropping down to 200 mem speeds.

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person?

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person? Obviously I want the gift to be a surprise (for my best friend specifically) so asking them if they received it would ruin that.

Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Similar Messages

Maybe you are looking for