Is there any way to switch back to ios 5,

I have found that ios 6 has slowed my ipad 2, even made it glichy. the internet has been disconecting randomly, and even shuts down itself the odd time since installing it.

There is no Apple Supported downgrade path...
Try This...
Close All Open Apps...  Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Similar Messages

  • Is there any way to get back to iOS 6.1.3? Far too many bugs with iOS 7

    Is there any way to go back to iOS 6.1.3 on iPhone 4? I'm sick of the bugs that have come with iOS 7. My phone is slow, it randomly calls numbers when it's in my pocket even though voice dialling has been disabled and the amount of crashes I've had have been ridiculous. It is so unstable. Is there anyway to change or is it time I considered jumping ship and going to Android?

    Nope... Many other post in here with same question... Sorry

  • Is there any way of going back to ios 6? 7 too slow on 4

    I downloaded ios 7 for my iPhone 4 yesterday and it's basically ruined my phone, the speed and performance of the phone is ridiculously slow, I find myself typing without knowing what I'm typing until it finally catches up... Is there any way of me going back to ios 6? Or just speeding up 7 on my phone? If there's no way then I don't know why Apple have made ios 7 compatible with iPhone 4's.
    Any help will do! Thanks.
    Johnny Murphy

    Try turning Background App Refresh off.  Mine iPhone 4 immediately picked up speed when I turned that off.  It's not as quick as 6.1.3 but very close and definitely usable. 
    iOS 4 turned my iPhone 3 into a brick and it took me quite a while debugging this iPhone 4 after installing iOS 6.  Keep searching the discussion groups for possible answers.  You might install an app like System Activity Monitor which will show you if one application or process is hogging processor time and thus slowing down the phone.  You might have to google the process to find which app it is associated with, but this will give you a clue.  There is an answer.  You can't downgrade--at least not that I'm aware of--so keep working on finding the answer. 

  • Is there any way to go back to ios 7 from ios 8? I dont like it.

    I Recently downloaded IOS 8 onto my Iphone 5s and im not teally fond of it. Is this a permanent change or can i go back to ios 7?

    Yes it is permanent change. Apple does not allow you to downgrade once you have updated to the current iOS.

  • Is there any way to go back to IOS 5.0?

    I hate IOS 6. It is the worst. So is there anyway to revert to 5?

    There is no legit way at all to go back.
    Sorry.

  • Is there any way to revert back from IOS 6?

    IOS 6 doesn't play well with iPhone 4.  Apple maps are a waste of time, it's running really slow and crashes all the time.
    Bit of feedback for Apple on Apple maps - you need a map for navigation, not so you can see cities in pretty 3D?  map an App for the 3D! Give us something useful and accurate.  You really should have given us the option to choose between default mapping applications instead of taking it all out of our hands.

    Thanks for replying - I didn't know you could create a link to google maps. 
    Though using a map in safari is very difficult on a small screen.
    If I want to link to the map from an address in a website, email or message won't the phone always default to opening the apple map?

  • HT5262 Is there any way to 'Restore' back to iOS5 after mistakenly upgrading to 6?

    Is there any way to "Restore" back to iOS 5 after mistakenly upgrading to 6?

    Well, so much for using the "Maps" app on my overseas vacation starting next week.  I wonder how soon they will fix that?

  • I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

    I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

    If you had previously been backing up to iCloud (or a computer with iTunes), you would possibly have a backup.  That said, if you can't turn the phone on, you cannot create a backup of the device now.  Sorry.

  • IS THERE ANY WAY TO SWITCH TO A UK ACCOUNT TEMPORARILY SO I CAN DOWNLOAD ONE APP THEN SWITCH BACK TO A US ACCOUNT?

    IS THERE ANY WAY TO SWITCH TO A UK ACCOUNT TEMPORARILY SO I CAN DOWNLOAD ONE APP THEN SWITCH BACK TO A US ACCOUNT?

    Follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID.
    3. Tap View Apple ID.
    4. Enter your password.
    5. Go to Country/Region in the popup window to change to the desired store.
    See also: http://support.apple.com/kb/HT131

  • Tiny Hotmail - Accidentally switched to "PC view" and can't switch backnd any way to switch back

    While reading Hotmail on my iPhone, I accidentally hit a button called "PC View," and my view changed to something that looks like my Hotmail on my laptop, but it's so tiny that it's illegible, and it isn't well organized for a mobile device.  But I can't find any way to switch back to the other view.  I have refreshed the window, closed it, and returned, and I've clicked on everything I can see, but nothing seems to work.  I can't use my mail with this view.  This is a stupid user error, I know, but there must be some way to recover.  Can anyone help?

    I would delete this question but don't see a Delete button.  I didn't exactly get an answer to the question, but did learn that I should set up Hotmail in a different way so that I never see the screen with the tiny text.  RESOLVED

  • Is there a way to switch back to the old color scheme for the keypad? The new black-on-white color scheme is more difficult to see and use for the visually impaired.

    Is there a way to switch back to the old color scheme for the keypad? After upgrading to ios 6, the keypad switched to a black-on-white color scheme.  I have a severe visual impairment and found the previous white-on-black color scheme much easier to see and use. 
    The inverted colors option doesn’t make things look all that better.    My dad, who does not have any serious vision problems, has put off upgrading his iphone because of the color scheme changes.    

    I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
    I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

  • Is there any way to switch between using two different phones?

    I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
    Is there any way to do that sort of thing with Verizon?
    I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut).  So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?

    Michael_F wrote:
    So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
    yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
    4G SIM Information | Verizon Wireless

  • Is there any way of getting back from a wrong clicked free trial to add my serial number correctly?

    Hi
    On purchasing a new imac I copied the apps across & on opening CS6 was requested to load serial numbers, through tiredness I added the seria; number from CS5.5 and therefore not recognised for the CS6, then when about to enter again through tiredness I must have clicked free trial and now have the CS6 in that format.
    Is there any way of getting back to that initial box to load the correct numbers & get out of trial as although it works I need it set up correctly?
    Any help appreciated

    Sorry, cant see this visible on menu or drop downs, did run through all menus before posting, could just be tired from 3 weeks straight.
    If this is not an option does that mean I am set up ?

  • Is there any way to create backing bean, After page gets created?

    Hi
    Any one can please answer to my quick question !!!
    Is there any way to create the backing bean ,after a jsf page gets created using ADF ..?
    When i first time created the jsf jppx page i unchecked the option to generate backing bean, but later some time I would like to have backing bean for the newly created page. so is there any way to create backing bean ...?
    Thanks in Advance

    Have your page in the visual design mode then go to the Design->Page Properties menu and you'll be able to select auto-bind on the second tab.

  • When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

    For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
    The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
    The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
    This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
    This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

    Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
    You can use "Firefox > History > Restore Previous Session" to get the previous session.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
    You can set the warn prefs on the <b>about:config</b> page to <b>true</b> via the right-click context menu or toggle the value with a double left-click.
    * browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
    * browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
    * browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
    * browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

Maybe you are looking for

  • SQL quick challenge

    Hello All, I have two tables: Positions_tbl (Start_Position, End_Position) X_Positions (X_Name, X_Position) I need to find how many X_Position lies between each (Start_Position, End_Position) Thank you! Edited by: OMD on Feb 21, 2013 9:24 AM

  • Best practice to update inline/publish folio?

    Hi there Think all is in my question I have an online application with an online folio and I need to update the same folio with a new version. What is the best practice to organize my work ? DId I have to continue working in Indesign with the same ID

  • Leopard Install on Brand New MacBook Pro?

    Hey guy's, I got my first Mac today. A lovely brand new Macbook Pro. I got a copy of Leopard in the box and have run an upgrade. Was this right? As the computer is new with nothing on it and I have nothing to import of another Mac onto it should I ju

  • My MacBook Pro is giving me this message "Your photo library is either in use by another application or has become unreadable"

    Hello, My MacBook Pro is giving me this message "Your photo library is either in use by another application or has become unreadable" I connected my GoPro camera then my computer frooze & I could'nt click anything so I shut down the computer & when I

  • Replication DS6.2 - DS5.2 stops working after some time

    Hello! After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint. I have 2 masters DS5.2 and two masters DS6.2. Replication is working fine for some days. E.g. last time the replication