Is there any workaround for log LNs in read-only env. UNEXPECTED_STATE

I'm at 5.0.43 and encounter the same problem mentioned in The Berkeley DB Java Edition Package: BDB JE Library Version 11.2.5.0 (Release 5.0.55) Change Log
Fixed a bug that caused an exception such as the following, when opening an Environment in read-only mode. This occurred under certain circumstances when a clean shutdown (final checkpoint) was not performed when the Environment was last used by a read-write process.
I have below 2 questions:
1) I want to know if there's any workaround to this problem without having to upgrade BDB-JE.
2) Just want to make sure we will not have data compatible issue if we have to upgrade to the latest version
Thanks for your help.

This is a transient problem when opening in read-only mode. It does not cause corruption or a compatibility issue.
If you open the environment read-write and perform a normal shutdown (Environment.close), then it should be possible to open the environment read-only again.
However, it is possible that it could happen again if the read-write process exits without calling Environment.close. The only way to guarantee it won't happen again is to always call Environment.close in the read-write process before opening it read-only, or upgrade to the latest version of JE 5.
--mark

Similar Messages

Is there any apps for sms or text reader???

Is there any apps for sms or text reader???

Hi shishirtusi,
Thank you for your question, I understand that you would like to know if there is a browser available for the Firefox OS platform that asks for the desktop version of a site, instead of the mobile one.
There was a bug filed for this feature in the earlier devices of Firefox OS, however there is currently no ETA on when they will include this feature in the Firefox OS browser.
I understand that this news may be frustrating. However, the [Bug 833150 - Support "Request Desktop mode" in browser app in Firefox OS ] and other bugs for specific devices are bugs that I have found that shows it has been requested before.
There is also a place in Bugzilla to suggest features here [https://bugzilla.mozilla.org/form.fxos.feature] however I cannot estimated time when this will be available.

Is there any workaround for Bug 6644652 ?

Hi
This issue is documented in DBAppTables GTC Connector at Known issues:
"Bug 6644652
Reconciliation of account deletion is not supported. In other words, if a record is
deleted from the target database, then this deletion is not reconciled into Oracle
Identity Manager"
Is there any workaround that can be used ?
Thank You in advanced,
Ionut

EHLO!
Today I ALMOST finalized my delete-recon (is for AD objects, but I think it may work in many contexts). As the pals said, you have to use the createDeleteReconciliationEvent method from the operations API.
I had a big problem: I spent a day looking for a NullPointerException that was raised just when this method is called. I realized that there is not a problem itself, the exception was raised because I was launching from the Eclipse project! So, instead of develop all the stuff and then pass it to OIM, I had to maje the jar, put it into the ScheduleTask folder, and execute it with the Task Scheduler from the Design Console, or from the Admin Console.
For a brief:
1) make a class that extends com.thortech.xl.scheduler.tasks.SchedulerBaseTask
2) implement the execute() method
3) for creating the operator, you can call (tcReconciliationOperationsIntf)getUtility("Thor.API.Operations.tcReconciliationOperationsIntf") (getUility is inherited from SchedulerBaseTask)
4) Make some Map object, with key/value pairs. Keys have to be the same as they appear in the Reconciliation Fields of the Resource Object, and at least you have to put the required ones. Call the method, the first parameter is a String with the RO ("Xellerate User", "AD User", "Exchange", etc).
For example, you can make something like this:
               HashMap hm = new HashMap();
               hm.put("User ID", "drldap");
               hm.put("objectGUID", "12345679");
               try {
                    reconOps.createDeleteReconciliationEvent("AD User", hm);
               catch(Exception e) {
                    e.printStackTrace(System.out);
Hope it was helpful. Enjoy!
DrLDAP!

Is there any workaround for exporting 24 bit AAF of OMF in soundtrack?

Hi
Soundtrack pro seems to have only 16bit AAF export function. Is there any workaround to be able to export a multitrack session in higher bit (24bit industry standard) resolution, in AAF or OMF format?
I know Final Cut has 24bit AAF export funcion, but sending clips from soundtrack to Final Cut seems not possible. Only sending mastermixes to FC is possible. But I want to send individual clips to FC.
Or any other suggestions are welcome for solving this problem.
Thanks!
Xske

If Premiere offers you the option to use hardware encoding, then your card is recognized. There is normally nothing more to do. If I understand you correctly, you are concerned that Premiere is not using the card. There are 2 ways to check if it is:
1. Install someting like GPU-Z (google it, it's free) to monitor the GPU. Start to encode something that will actually use CUDA cores, and you should see some activity reported, given as a percentage. Keep in mind that CUDA is only used for some specific tasks (some effects, resizing) when encoding.
2. Export a file that will use CUDA when encoding 2 times, once with hardware encoding enabled, and then with software only. Is there a difference in the time needed to complete the export?

Is there any workaround for URL & TABS

Hi ,
1.I have the following case mentioned at :
URL region error when changing tabs
2. I would like to know if there are any workarounds for this case, due to we urgently need this functionality.
Thanks in advance
Etay G

Etay,
The question on the post you referenced was answered thoroughly and has nothing to do with the subject of this post.
If you have a new question, please post it here in full detail.
Scott

Is there any better way to publish a "read-only" panel on the web

Hi
I am new user in Labview. I am trying to publish some of our test result on the web. However. the current methods all have their disadvantages in my application
.monitor: I like this, but it is only supported by Netscape, which is not do popular anymore. I dont want push our customer to install it just for our demonstration.
.snap+refresh: Our application requires fairly fast refresh, 1 fresh/sec. the blank in during the refresh does not look nice.
Embed: I want to demonstration to be read-only, I dont want the custome gain any control over that. Also scroll bar shows in the embed mode is also something I dont want.
I am using LabView 6.1, if the problem has been solve in new version, I am glad to upgrade. Also is there is other better to meet my requirement, please help me.
Thanks
Message Edited by zach DDS on 10-05-2005 12:23 PM

Sorry, you must have edited your message. When I saw it, only the title showed .
Embedded is what you want. You can change the windows apperance (e.g. hide the scroll bars) by changing the VI properties.
Uncheck "request control" in the web publishing wizard, and it will be read only.
Works fine here in LabVIEW 7.1. I don't remember if 6.1 had any limitations.
LabVIEW Champion . Do more with less code and in less time .

Are there any workarounds for multiple PDF files created for a single Word 2011 document?

I am running...
Mac OS X Version 10.6.8
Word for Mac 2011
Adobe Acrobat X Version 10.1.0
I am working with 100 plus page Word documents that go back and forth between portrait and landscape layouts. When I attempt to create an Acrobat PDF document (or one using the native Mac PDF function), I end up with 10 to 15 separate PDF documents. One person suggested that I simple stitch them together, which is an inordinate amount of work as compared to how simple it is do on my PC with older versions of Acrobat and Word. However, I have noticed that the margins are way off and the pagination is off sometimes too. So even this workaround is not the answer. I last talked to Microsoft, Apple, and Acrobat tech support about five weeks ago. Each blaming the other two but saying they were working together to solve the problem. My recent searches of forums has not revealed any solutions nor have updates changed anything.
As I am anticipating the day when my old PC stops working, I am searching for a possible workaround or other solution for this problem.

Thanks for your reply.
The tip-off may be this. In Word 2007 on my pc when I print the document to a printer, Word generates 1 print file for the entire document. If I print to PDF, one print file is generated by Word and Acrobat creates a PDF from this file.
What I just discovered by accident was that when Word for Mac 2011 prints the same Word document to a printer it creates about 10 different print files. So instead of a 100 page PDF document I end up with 10 PDF documents of 1 to 30 pages depending where the page orientation shifts in the Word document. If you print to a printer that is not turned on, you can see all of the files stacked up in the printer queue. I suspect that Word for Mac 2011 generates 10 different print files during the PDF creation process and therefore Acrobat logically creates 10 different PDFs. Unfortunately, there are margin errors and other layout errors in these 10 different PDFs so stitching them together is useless.
I am beginning to think that the way Word for Mac 2011 prints documents is simply incompatabile to Acrobat or the PDF creator that is native to the Mac OS.
I just think that this is a problem that Microsoft is going to have to fix.

Are there any workarounds for iMacs not having flash?

I recently purchased a new iMac and browsing the web/web research has been a challenge. Most often than not while browsing safari I run into a limitation due to the lack of adobe flash support. Last night my wife spent a half hour filling out an application and couldn't complete it due to a flash required segment. She had to redo it on our old dell laptop. Is this something I'm just going to have to deal with if I keep my iMac?

Get the installer here, then close any browsers and install.
http://www.adobe.com/products/flashplayer/distribution3.html
Shouldn't be necessary to uninstall first, but you can move these two to the Trash first.
In /Library/Internet Plug-Ins
Flash Player.plugin
flashplayer.xpt
That's the hard drive Library (not /System/Library)

Is there any workaround for the brother driver 2.8 update which seems to remove duplexing

It seems the brother printer 2.8 update of 12/14 has removed the ability to print in a duplex mode - i.e. both sides of a sheet. Printing proceeds in the usual fashion and the printer goes through the mechanics to print both sides, but doesn't and outputs the remainder on a second sheet. It is definitely the update as I have another machine which I, thankfully, did not update and that works fine with the same printer.
I tried to go back in Time Machine, but it isn't obvious what to restore and, so far, my attempts to do haven't been successful.

After a bit of experimenting it turns out that somehow the update either defaults to a CUPS definition that causes this weird behavior or the old profile tigether with the update is problematic. It I download the current drivers at Brother and change to Brother HL-5250DN BR-Script 3 all is well.

Any workarounds for the X11 apps segmentation faults on intel with 10.4.8 ?

Hi,
We've an X11 application, compiled for PPC, which runs fine with a G5 iMac on 10.4.8. However, it crashes with a segmentation fault on a MacBook Pro with 10.4.8 (running through Rosetta).
Searching the web, we found that this seems to be a widespread problem for X11 apps running on Intel Macs with 10.4.8.
Has this been submitted as an important bug to Apple?
Are there any workarounds for it?
Is the problem specific to PPC-only builds, or does it also happen with Universal builds?
Thank you for any hints you could give about this,
cesar
Mac OS X (10.4.8)

A powerpc-binary program running under Rosetta can only load powerpc-binary modules...can't cross in and out of emulation within a single process. Perhaps your program is trying to load a module from X11 that is present as an intel-only binary? Rosetta is certainly no future-looking cure-all, just a stop-gap to allow one to keep using older stuff, and it is kinda fragile sometimes. If your target audience is both powerpc and intel machines, compile as a universal binary so it's native for everyone.

I am unable to fully register my iphone 5S because my work email has an apostrophe. Are there any workarounds?

I am unable to obtain an Apple ID for my employer-issued iphone 5S because my employer-issued email address has an apostrophe. Are there any workarounds for this issue?

Ask your email admin for an alias to your same mailbox without the apostrophe. Don't use it for anything other than your apple id.

While looking to upgrade to a new MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. syncing of these must be done through iCloud. This is a deal breaker for me. are there any workarounds?

While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?

When you say wired syncing, are you meaning between an iphone and your mac?

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

Is there a workaround for websites that use "frames" when Safari does not support?

Is there a workaround for a website that requires "frames" when Safari (5.0.6) does not support it?

Has anyone found a work-around for this that works?
No. Any attempt to use an unsupported network device with Time Machine will probably result in data loss, even if it seems to be working at first. If you take data protection seriously, you won't try.
Is it possible to get Time Machine to use SMB to make the backups?
No.

Is there any list for out of the box portlets that come with portal installation.

Is there any list for out of the box portlets that come with portal installation?
Ramesh

Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
Portlets Created Upon Install
The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
You can also install the following functionality as part of the Optional Enterprise Web Components:
[url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
[url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

Is there any workaround for log LNs in read-only env. UNEXPECTED_STATE

Similar Messages

Maybe you are looking for