Is there anybody who has interface NI DAQ card with Pressure System Scanners

I am trying to acquire data from Pressure System's sensor ESP 16 BP with NI DAQ card PCI-6221.
Is there anybody who has perform this job.
Thanks,
Surender Kumar
Regards,
Balaji DP

Hello Surender. 
Thank you for contacting National Instruments. 
Although I have never used that particular pressure sensor, the setup for measuring a pressure sensor is usually the same.  Since the sensor probably outputs a voltage that is correlated with the amount of pressure that the sensor is detecting, we can configure a voltage task inside of Measurement and Automation Explorer and then port that into LabVIEW.  A great video tutorial of a DAQmx task being created and then transferred into LabVIEW is available at:
 Creating a Task in NI-DAQmx and Using it in LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5374#toc2
Also, there is a great site that contains general information on pressure sensors at:
Measuring Pressure with Pressure Sensors
http://zone.ni.com/devzone/cda/tut/p/id/3639
Let me know if this information answers your questions.  If you have a more specific question, please let us know and we would be happy to help you. 
Happy Holidays!
Brian F
Applications Engineer
National Instruments

Similar Messages

  • Is there ANYONE who has not had a problem with the 10.4.10 upgrade?

    Just bought Ilife and it requires 10.4.9. I'm using 10.4.8. I can't seem to find any post with positive results. Is 10.4.10 that bad. Sorry is this is a double post. I did this about an hour ago and it never showed up.
    Thanks
    Bob

    I downloaded the upgrade via Software Update and I've had no problems, other than the sound issue. There was a work around that worked fine, then Apple fixed the problem and that download also worked fine for me.
    I've become a believer in repairing permissions before, after and often software updates.
    Running the cron scrips from Onxy often, and emptying my user/library/cache daily seems to be worthwhile too.
    For what it's worth, my little 17" intel Imac keeps chuggin' along.
    Jon

  • Cable .. soundblaster -- soundblaster live .. is there anybody, who would give me his cabl

    Hallo
    Unfortunately my AUD_EXT cable is destroyed and I don't know where to buy a new one
    Is there anybody who has a damaged li've dri've and don't needs the AUD_EXT cable anymore
    When there is anybody, please contact me. I need this cable ...
    Thank you

    click here and scroll toward the bottom:
    Contact Us | Verizon Wireless
    You also could file a Notice of Dispute:
    http://www.verizonwireless.com/support/pdf/Notice_of_Dispute.pdf

  • Hello is there anybody who can help me in german? i have the same problem like the guy with i tunes. it won´t open an give me an error "An application has made an attempt to load the C runtimelibrary incorrectly" Please contact the application´s support..

    I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
    Thanks you for help greetings from austria

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • NI have a Braun Photo Technik slidescan 3600 and it canot make it work with Lion: Is there anybody who sorted out the same problem? thanks

    I have a Braun Photo Technik slidescan 3600 and I cannot make it work with Lion. Is there anybody who sorted out the same problem? thanks

    We sure do have a problem - this is strictly a user to user assistance forum with users helping other users use the iPhoto program as it is - no one here has any ability to change or influnence the desigh or implementation of iPhoto
    try the iPhoto menu ==> provide iPhoto feedback
    LN

  • Is there anyone who has used Freescale's SimpleSUB.dll and DEMOJM board?

    Hello,
    I am trying to connect Frescale DEMOJM board over USB connection. I am adding SimpleUSB.dll to my visual instrument thorough .NET constructor node and giving an mscorlib class GUID to the GUID property, than calling OpenConnection method from an invoke node referencing the SimpleUSB reference. But there is no valid connection to the device as DeviceConnected parameter return "False". 
    I am using LabVIEW 8.6 trial, .NET Framework 3.5. So they are up to date I guess. Is there a limitation of these for using .NET dll? And also I can use the dll in Visual C# successfully.
    At first there was another problem using the .NET constructor node in LabVIEW because of Vista OS.  The vi was blocking when i added the node to the vi. I changed the "language & regional settings" to English(USA). The problem seemed to be solved. Can Vista's bug be still a problem?
    Is there anyone who  has used Freescale's SimpleUSB.dll and DEMOJM board with LabVIEW?
    I will be thankfull for your helps.
    Emre

    Hello Anna,
    Here is one of my poor vi trials.   I have also tried putting some conditionals in some other files but it didn't helped.
    http://rapidshare.com/files/176194859/EXTDLL1.rar.html
    Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#.  You can also download the dll from that web page and there is helpfull documentation for the dll.
    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
    I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
    Thanks,
    Emre

  • I CANNOT ACTIVATE MY ILLUSTRATOR  AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

    I CANNOT ACTIVATE MY ILLUSTRATOR  AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • I got my ipad this afternoon, and it suddenly shutdown after i create my account.  I can't open it since 3 hours. Is there anybody who can help me

    hi, i got my ipad 3 this afternoon, i created my account. When i'm about to install my fb, suddenly my ipad shutdown . Since 3 hours now, i can open it. Is there anybody who can help me what to do? The batter was fully charged. Thanks you

    Try a Reset. Power and Home Press For 10 Seconds

  • IS THERE ANYBODY WHO CAN TAKE IPHONE FROM TURKEY???

    I m writing from Türkiye, and I wonder that is there anybody who enable to buy iphone from Turkey in last 2 weeks, because I can not find any place to buy this mobile phone. I have heard some news paper about Apple lost label law case in Turkey. Is it true or not? If there is anybody who have information about this issue can you inform me also.

    Merhaba,
    Your question may have been answered in another thread:
    http://discussions.apple.com/thread.jspa?messageID=10665040

  • Is there anyone who doesn't have any problem with Z3 ?

    I'm thinking to buy this phone, so I want to know is there anyone who has no problems with it, because in this and other forums, I find a lot of discouraged people who have a wide variety of problems.
    Thanks a lot

    uliwooly wrote:
    Think about it, this is a Support forum. users who have issues come looking for help, it doesn't mean that the majority have issues. 
    I understand what you're saying, but this is my dilemma:
    I currently have sony Xperia Z1 compact which is full of small problems.
    -back panel rattle when I touch it near camera lens
    -a big gap between the panels and the frame
    -camera freeze and need to restart the phone very often
    -calendar widget does not eject notification and birthdays...
    I was looking for a solution to these problems on the forum for the Z1 compact, but so far I have not solved a single.
    Such problems I have never had on my samsung phones. Still, I'm determined to buy a Z3 because of the design and premium materials, but if I compare it with My Z1 Compact, I'm a little scared.

  • Is there anyone who is not having a problem with their Fascinate?

    Just ordered the Fascinate for a penny from Amazon. Looks like that's all it's worth! LOL. Is there anyone who has not had problems with this phone! I have not received mine yet, maybe I'll be one of the lucky ones.
    Should I do the update or stick with 2.1? Do I have a choice?

    2.2.1 is Froyo. The phone originally shipped with 2.1 Eclair. What is your Build number? I'm assuming it is not the ED04 (which you should avoid at all costs) since you were prompted to update.
    Edit: Also, I don't know if it works the same way on the Fascinate, but on the Droid X (running unrooted stock software) you could only postpone the update for a certain period of time and then it would force the update without your approval. Broke a lot of people's X's that were previously running fine. Hope that doesn't happen to you but just letting you know it's possible.

  • If I'm overseas, and I use iMessage not connected to wifi, and I'm messaging someone who has an iPhone as well with ios 7, will get charged SMS/mms fees?

    if I'm overseas, and I use iMessage not connected to wifi, and I'm messaging someone who has an iPhone as well with ios 7, will get charged SMS/mms fees?

    No, but cellular data will be used at whatever international roaming rate you carrier charges for data in whatever country.
    Exchanging iMessages requires the same thing as email - an available internet connection. SMS/MMS is completely separate from iMessage.

  • Is there a way to interface Labview Web GUI with Fusion Charts?

    Is there a way to interface Labview Web GUI with Fusion Charts for dynamic web presentation?
    http://www.fusioncharts.com/

    I have a ballistics program which our clients can use (see attached).  Basically there is a series of Cascading Combo boxes that the user must select for Bullet Manufacturer, Caliber, and Bullet ID.  The program then goes out to the relevant data file (.CSV) and provides ballistic inputs for the selected projectile.  The user is also required to enter in additional data, such as Sight Height, LOS Range, Temp, etc..  Once all data is input, the user either hits the Calculate Button or the Tab (I'm using Event Structures and I now realize this is an issue for Web UI Builder), and the data gets passed to a MathScript which then crunches numbers and spits output to fill a table and a series of Graphs based upon the tablulated data (if so desired).
    I was hoping to use Labivew for the first two parts ( Data Collection and Number Crunching) and use something like Fusion Charts for the presentation.  I tried learning Ruby on Rails.  I was successful with the Ruby part (basically the Mathscript portion) but really got hung up on the Rails section and the need for something like JSON to interface with it.  Could not find a useful source of information which really showed you how to combine the two effectively. 
    Attachments:
    Ballistics1.JPG ‏144 KB
    Ballistics2.JPG ‏265 KB

  • PCI 7830R series DAQ card with SCB 68

    Can anybody how to mapp PCI 7830R card with SCB68, which was connected in 0 connector? is thier any VI as an example for this

    Hello Sir.... i created a VI in Project Explorer Methode to test the working condition of DAQ card PCI 7830R which i installed in my PC , in both Sub VI and the Host VI the programme is working , now i connect the SCB 68 hardware with DAQ card thro RMIO cable , i wired the DIgital Pins of SCB68 (respectievely with DAQ card Pins) in a Bread Board an place a LED corresponding to pins to show the real world output...
      Now my prob is after i connecting the wire i run the VI, in breadboard the LED's are not getting ON same status is displayed in Labview Front panel too , when i remove the wire the LED in front panel of both sub and Host VI is getting ON..... y this prob occuring? to solve this what i have to do? i want to show realworld output (LED On in Bread board) thro SCB68... how to solve this?
    Attachments:
    Digi.vi ‏37 KB
    Digi (H).vi ‏121 KB

  • I need feedback from anybody who has the 2011 baseline 15" MacBook Pro

    I need anyone who has the new baseline 15" MacBook Pro to give me feedback. Like, is it fast enough, is the resolution ok, is the hard drive fast enough at 5400 rpm or is it slow in transferring data, especially this point, does it require any upgrade, and all that other stuff.

    Perform a SMC Reset, it could be causing your battery problems.
    https://support.apple.com/kb/HT3964

Maybe you are looking for

  • What is better: Apple TV ethernet or WiFi to an Airport repeater?

    Hi - I have a Time Capsule as main WiFi router (ethernet to Cable modem), and an Airport Extreme as repeater/booster in the other side of the house. There, I can connect the AppleTV (2nd generation) either by WiFi to the Airport Extreme repeater or w

  • PO/ Invoice created for supplier does not exist for particular company code

    Hi Gurus, We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated. As per my analysis: 1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. T

  • Error FRM-10102 While Opening APXINWKB.fmb (Oracle Apps Invoice Forms) in .

    HI, I have freshly installed the Oracle 10g Forms n Reports developer and copied all the necessary pll, plx and fmb from AU_TOP/resource or AU_TOP/forms/US folder, and then updated in FORMS_PATH of regedit. But when i am trying to open the APXINWKB.f

  • How to call Jakarta Ant via JAVA?

    Hi. My application has a new menu. This menu creates a build.xml Ant file. Now, when this menu is invoked , its action should call Jakarta Ant, after creating the xml file, so that the build.xml will do what is necessary. How can I do it? That is, ho

  • Song causes my ipod to shut off...please see details

    I have an ipod shuffle first generation that I've had for 2 years and nothing like this has ever happened before. I downloaded new music to my ipod and when it gets to a certain song, it just dies. I can hear a faint click and then it just shuts off.