Is there anyone out there who pre-ordered on the 3rd and still has not received their iPhone???

I pre-ordered on the third and received an email on the fourth saying my phone had shipped. I checked FedEx with the tracking # Verizon provided and I still get the same status that I got on the 4th. It says the order has been "initiated". The next step would be "picked up", but here it is nine days after I pre-ordered and no phone!!! Hasn't even shipped!!!
Is there anyone who is experiencing the same problems???

I have been going back forth with Verizon and UPS and Verizon is blaming UPS and told me it's out of their hands once it ships. UPS is saying they're doing their best to get the package back to NJ where I am. I also tried cancelling my order with Verizon and was told it could not be cancelled because the package has shipped. I was told if I wanted another phone I'd have to pay for it again. No one knows where my phone is UPS says they have misrouted a trailer full of Iphones. I don't know how true that is.

Similar Messages

Anyone order later on the 3rd and still no shipping info?

We ordered later on the 3rd and still haven't received any shipping info - and now when we track the order status it's giving an expected ship date of the 18th, like all of the orders placed today.
Anyone else on the preorder not get their phones yet?

Yes, actually I ordered early on the 3rd. #2504 to be exact and I have not received anything but the runaround from customer service. They keep telling me I will get my phone but I have lost faith that that will happen. The following is from an email I received from Verizon stating:
"Congratulations and thank you for your iPhone 4 purchase.
It has come to our attention that your order confirmation
may have reflected an incorrect shipping date.
Your satisfaction is extremely important to us, so we would
like to assure you that your phone will be delivered on or
before 2/10 as promised."
Seems that they are going to break their promise. I am really very unsatisfied and thanks to Verizon my enthusiasm for the iphone has turned sour.
Mel

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Is there anyone out there who cannot get into their e-mail through your internet providers address on your i-pad? I keep getting a 100 error code

Is there anyone out there who have come across a 100 error code by trying to log into their e-mail through their internet provider? The error code means that you are trying to log in from another country. Is there something wrong with the settings???Please let me know if there is an answer out there. thank you
Michele

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

I have moved my sdcard over to my samsung brightside phone. but the videos can not be read. Is there anyone out there whom may have experienced the same issue?

i have moved my sdcard over to my samsung brightside phone,. but the videos can not be read. Is there anyone out there whom may have experienced the same issue? I also tried transferring my files over to my pc first, then reformatted the sdcard, then transferred to the appropriate files back onto the sdcard and put back into samsung.

Thanks for the info SuzyQ. lorsa, the community is correct, pictures and videos can be saved differently on other phones. What phone did you remove the SIM card from? Where did you purchase your SIM card from? Your previous phones SD card and format may not be compatible with your Brightside device. I show you advise that you reformated your memory card but make sure the files are saved correctly. Listed below are the different type of files you can save, receive, and view for pics and videos with your device.
Files that are compatible with the Brightside device:
JPEG (*.jpg, *.jpeg, *.jpe)
BMP (*.bmp)
PNG (*.png)
GIF (*.gif)
3G2 (*.3g2)
3GP (*.3gp)
MPEG4 (*.mpg)
Please let me know if the information above helped with your issue. Please reach out to us if you have any questions or concerns. Make sure you always power cycle periodically. You may also need to peform a hard rest for your phone.
KinquanaH_VZW

My iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

my iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

Is there anyone out there happy with Media Encoder?

After almost year of working with CS4 under both XP 32 bit and now Windows 7 64 bit, I am delighted with Photoshop and After Effects, tolerant of the defects in Premiere, and absolutely insanely angry about Adobe Media Encoder. I have spent a great deal of time following other people's posts and recommended "fixes." None have made the slightest difference in the ponderous performance and frequent crashing, especially when exporting AC3 files through Surcode.
I have tested this setup with no greater happiness on clean installs with NOTHING else on the computer but CS4 with all updates. These systems have all significantly exceeded Adobe's requirements for the software.
I have used in that time three different motherboards. I have worked with Premiere for years, literally since version 3. A have loads of experience optimizing computers for video. I also have lots of experience with other editing systems, having done in-depth reviews of NLEs for DV Magazine for a number of years. This is not to say that I have not missed something, but the consistent complaints I see reveal a critical lack of attention to the broken bits of this system.
I see lots of posts on this and other forums about the poor performance of AME. I see very few where anyone is happy with the software.
My current 2-hour project which loads into Premiere in under a minute can take 20 or 30 minutes to load in AME. Even when exporting only audio, AME appears to launch PPheadless and render all video frames before getting to the audio, and I have repeated issues with the program locking up when exporting more than 20-25 minutes of audio.
The decision to remove all direct exporting ability from Premiere and use the often broken Dynamic Link to AME was a gross mistake which in my opinion takes Premiere off the table for any professional shop. I do not do work for hire, but I cannot imagine explaining to a client who is paying by the hour why we have to sit and wait for fifteen or twenty minutes for AME to load the project that was already loaded in PP to just export a brief section. The architectural decision might be OK if all the bits that were involved were bulletproof and reliable, but the ImportProcessServer.exe and other dynamic link bits are clearly the source of problems for many people.
So here's my question: is there ANY professional end user out there that is happy with the current incarnation of AME and the decision to remove direct export ability from PP?

What format(s) do you work in? What length of project? Do you output to AC3? I have no problems with AME for short projects or to output the same size/format -- for instance, I can usually output full HD for Blu-Ray but experience lots of crashes if scaling down to SD for DVD. The crashes also occur above certain lengths, usually 20 min +. With audio, I can output 5.1 uncompressed WAV in the same format (for instance, 16 bit) but if I try to output 24 bit (which AME is supposed to be able to do) I get "Encoding Failed - Unknown error." In fact the error log is ALL that very helpful message, always when transcoding to another format/bit depth/size. When outputting 5.1 to AC3, AME freezes up and fails at around 20 minutes.
Our systems are very silimar -- the current system is i7 proc with 6gb ddr3 ram on a gygabite GA-EX58-UD3R.
A have not had any huge issues really with AME for short videos or output to FLV for web.
But the workflow I use is something that CS4 is SUPPOSED to be able to do. And the very unusual issue is that I have seen posts about the same type of errors (with ImportProcessServer etc) on Macs as well.

TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

****************************************I NEED HELP, IS THERE ANYONE OUT THERE?************************************************

LOOK IM NOT TO HAPPY WITH THIS SERVES , IVE BEEN HERE THREE DAYS AND STILL NOTHING!!!! ALL I NEED IS TO TURN OFF COMPATIBLE. MICROSOFT SAID ITS NOT LETTING THINGS IN OR OUT. PLEASE NO MEASAGES, JUST TURN OFF, ANDLET ME MOVE ON!!!

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Does Anyone Know How Many Pre-Orders before the No Longer Accepting Orders Announcemtn

Just curios...did anyone find out how many iphones were sold until Verizon stopped Pre-Orders?

Order #s are random. I am sure they will be releasing info on that soon.

HT5714 i cancelled my pre order but the orange box still '' pre-ordered '' what am i gonna do ?

i cancelled my preorder but the orange box is still showing '' Pre-ordered'' . what does it mean ? am i still gonna get charged for the preoder even tho i cancelled it ? please help thank you x

Hi mikedelrey56!
It sounds like you may need to report an issue with this purchase using the information in the link below:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I filled out my info for my free copy of mountain lion almost 24 hours ago and still have not received conformation email. Whats up?

Has this happened to anyone else too?

Woke up this morning hoping to have the code, but nope... still hasn't come. Just like you, I submitted my original request 25 hours ago now, and have yet to hear ANYTHING from Apple.
I'm disappointed that the only answer I get is an AppleCare representative telling me to read the terms and conditions of requesting and then reading it and saying that it says processing will take up to 24 hours.
I expected better execution of this up-to-date program from Apple. I'm guessing it has to do with the botched codes going out that are showing up as already used.
Let's hope it will be today!

Is there anyone out there who has used iTunes Match for a large music collection who actually likes and recommends it?

I have over 16,000 custom selected songs in my library. It's the most important thing on my computer by far. Before I purchase Match, I would like to know if other users really like it.
When you purchase Match and all your tunes have been matched or uploaded, what do you do with your current iTunes library?
It's my understanding that you can stream tunes through your Mac computers but that you have to download them to an iPad, iPod or iPhone if you play the tunes through them, right?
When iTunes Match matches the tunes, does it put them where you had them prior to the match. I.e., will your library look the same as when you started?

When you purchase Match and all your tunes have been matched or uploaded, what do you do with your current iTunes library?
You need do nothing with it. You can keep it on your hard drive to access locally.
It's my understanding that you can stream tunes through your Mac computers but that you have to download them to an iPad, iPod or iPhone if you play the tunes through them, right?
Yes, that's correct.
When iTunes Match matches the tunes, does it put them where you had them prior to the match. I.e., will your library look the same as when you started?
It presents the library as it was originally on my hard drive, but then I don't have my library's organization customized.
iCloud- iTunes Match
iTunes in the Cloud and iTunes Match Availability
iTunes Store- Troubleshooting iTunes Match
iTunes- How to add a computer or iOS device to iTunes Match

Is there anyone out there that NEVER gets system overload errors?

If so, what hardware do you have. I'm thinking of upgrading to a new iMac so I can record in peace (no overload errors). Can you please share your GOOD experiences. Is there hope?
Thanks

What format(s) do you work in? What length of project? Do you output to AC3? I have no problems with AME for short projects or to output the same size/format -- for instance, I can usually output full HD for Blu-Ray but experience lots of crashes if scaling down to SD for DVD. The crashes also occur above certain lengths, usually 20 min +. With audio, I can output 5.1 uncompressed WAV in the same format (for instance, 16 bit) but if I try to output 24 bit (which AME is supposed to be able to do) I get "Encoding Failed - Unknown error." In fact the error log is ALL that very helpful message, always when transcoding to another format/bit depth/size. When outputting 5.1 to AC3, AME freezes up and fails at around 20 minutes.
Our systems are very silimar -- the current system is i7 proc with 6gb ddr3 ram on a gygabite GA-EX58-UD3R.
A have not had any huge issues really with AME for short videos or output to FLV for web.
But the workflow I use is something that CS4 is SUPPOSED to be able to do. And the very unusual issue is that I have seen posts about the same type of errors (with ImportProcessServer etc) on Macs as well.

Is there anyone out there who pre-ordered on the 3rd and still has not received their iPhone???

Similar Messages

Maybe you are looking for