Is there anyway to check(date,time) when contact was added to iPhone4.Thanks

What I'm trying to figure out if there is anyway I can check when I added a contact on my iphone4 like the date or time? Or if there is anyway of doing this at all. Thanks

At this time iPhone users cannot view timestamps of when contacts are created, deleted or modified within the Contacts app. Try browsing old messages or phone records to find out when you first contacted the number. That may give you a better idea of when you initially had access to the number or created the contact.

Similar Messages

Is there anyway to record the time of a signature on a document?

I work in real estate and timely signatures are very important. Is there anyway to show the time a document was signed on the actual document?

Hi Scott,
Yes, this is quite possible using the text-tagging feature in Echosign. A sample of this text-tagging code would be the following for a signature block along with the date and the time:
{{Sig1_es_:signer1:signature}}
{{Date_es_:signer1:date}}
{{Time_es_:signer1:calc(now()):format(Date,”hh:nn:ss tt”)}}
So, in the instance where it shows the {{Time}} block, the calculation would be broken down as follows:
{{Time_es_:signer1:calc(now()):format(Date,"hh:nn:ss tt")}}
"calc" tells the app to calculate, "now" returns the date and time when the signature is signed. Along with the Date, you also get the hours(hh), minutes (nn), and seconds (ss). The "tt" at the end designates the AM or PM status whereas if you wanted to use Military or 24-hour time, you'd drop the "tt" and simply use "HH" in place of the "hh".
I hope this answers the question for you and if there are any other questions in follow-up to this, feel free to ask!
Also, for additional information on text-tagging, feel free to check this link.
ODG.

Find date/time when item added item in folder?

Hey guys,
I was wondering if there was any Automator Action out there that allows you filter finder items by date "added" to a folder.
Please don't confuse with the date of the actual item. I am talking about if there is anyway to be able to detect and find when an item was added into a folder.
Thanks. I hope there is something out there. If not then I hope that there is some sort of applescript that can do this.
Please help.
Phil

I'm not aware of an Automator action, but starting in OS X 10.7 Lion a Spotlight metadata attribute named kMDItemDateAdded was added that contains the ISO date/time an item was added. If the item has been moved recently enough to have the attribute (and assuming that Spotlight is indexing the containing folder), there are a couple of utilities you could use.
The mdfind shell utility won't be quite like filtering, but by limiting the find search to a particular folder and using the appropriate query, you can get a list of items - for example, the following will list items added to the Downloads folder in the last week:
do shell script "mdfind -onlyin ~/Downloads 'kMDItemDateAdded >= $time.today(-7)' "
The mdls shell utility can be used if you are just wanting to get the value of a particular metadata attribute from an item, for example:
set theFile to quoted form of POSIX path of (choose file)
do shell script "mdls -name kMDItemDateAdded -raw " & theFile

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

Can we find out the date/time when the datafile last extended?

Hello all,
Can we find out the date/time when the datafile last extended?
Is it possible to find out from the alert.log file?
Correct me if I am worng?
Thanks in advance
Himanshu

In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
Thanks
Himanshu

Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)

Hi all,
I might be being a little dull here, but my question is exacly as in the title: Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)? I have fat fingers occasionally and whilst people at work don't mind private phone usage to have it occasionally activating the mic and then me cancelling it a little annoying.
Any suggestions?
Thanks
Dave

There is a proximity sensor that should turn the screen off when you place the phone near your face. Do you have a case that's blocking this? Try removing your case. If no case, try restoring you iPhone. If still a problem, return it to Apple for a warranty replacement.

Preordered iPhone 6 at 3am eastern time when it was released and haven't received it

I Preordered my I phone 6 at 3am eastern time when it was launched and received a confirmation email stating that I would receive my phone today and I did not!!! I am not happy at all with verizon maybe it is time to switch to another company. To make matters worse my father who ordered the same exact phone as I did hours after I did already received his in the morning today......that just isn't right! What do you plan to do about this verizon and hen exactly am I going to get my phone?
>> Subject edited for brevity <<
Message was edited by: Verizon Moderator

Hello Jayhiggins.
You did not really mention anything you tried. So thought I would list some tips that may or may not assist with this. But hopefully something helps you a bit.
1. Reboot iPhone
-Hold down the home button & sleep/wake button together till you see the silver apple logo. Once you do let go. Now test SMS
2. Toggle Airplane Mode ON for 1 min
-Settings - Airplane Mode - Turn ON for 1 min then turn off, Now test SMS
3. Toggle 3G Mode OFF for 1 min
-Settings - General - Network - 3G - Turn OFF for 1 min then ON, Retest SMS
4. Reset Network Settings
-Settings - General - Reset - Reset Network Settings - Confirm - iPhone Reboots
-This will not touch any of the data on the iPhone at all but you may need to put in WiFi passwords again
-Retest SMS
5. Remove SIM Card
-Remove SIM card, Clean it with a soft dry cloth, as well as the try, Blow into the SIM bay at an angle to blow out any particles. Link below on how to remove SIM card
http://support.apple.com/kb/HT1438
6. Usually a restore would be the next option but let's hold this till last. At this time you will want to contact your cell providers Data support group. As they might be able to check settings on their end for possible time stamp differences. If you find they can troubleshoot no more then restore iPhone

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

Thomas A Reed wrote:
You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

Calling java class from PLSQL that returns date/time a file was saved

Does anybody know, is there a java class I can compile into Oracle DB, and call from PLSQL that returns me the date/time a file was saved.
As far as I'm aware this cannot be achieved using UTL_FILE.
Please advise
Thanks
Warren

I found this thread from before that might be helpful
how to connect to UNIX OS from oracle stored procedure

Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo, ignoring the off slider that appears first, then release.

How do we know when datafile was added to a tablespace

HI experts,
I wanted to know how do we know when datafile was added to a tablespace.
Actually i need to monitor how much space was used for a month for a tablespace
thanks in advance

Which could be turned into an external table and queried at will:
Demo of the alert log as a table at:
http://www.psoug.org/reference/externaltab.html
Just a quick note with respect to background_dump_dest for anyone starting into 11g. It is deprecated and BDUMP and UDUMP no longer exist: Read the docs.

When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?

Hey guys
When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?
thanks

A device that has been jailbroken cannot be discussed on these Communities...Apple will not help you as that voids your warranty.

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

How do I preserve date/time when converting to DNG?

When I convert a file to DNG format in Lightroom, it changes the capture time in the metadata to the current date and time, rather than copying the source data. Is there a way in which I can tell it to leave my dates alone?

You wrote: “I noticed my mistake. It seems that what the conversion process was changing was the ‘Metadata Date’ and ‘Date Time’ fields, but ‘Date Time ‘" and ‘Date Time Digitized’ were remaining the proper, original date. The cause of my confusion was that my Metadata panel view was hiding all but the ‘Date Time’ field, so it appeared as though it had overwritten my prior date information.”
Date/times in photo metadata can be very confusing. There are all these fields with confusing names imposed by legacy industry standards -- I challenge anyone except a metadata nerd like me to remember the meanings and differences of Date/Time, Date/Time Original, Date/Time Digitized, Capture Time, Metadata Date, Modify Date, .... The worst are the two XMP fields Date Created and Create Date, which have two very different meanings! And every app and operating system makes a half-hearted attempt to "simplify" it for the user by choosing different names.
LR makes no serious attempt to make this easy for the user, and over the first several versions, it's handling of date/times was pretty sloppy. (It still has outstanding bugs that don't crop up that often in practice.) You would think that at least LR would provide roll-over tool tips on the field names in the Metadata panel explaining each field.

Is there anyway to check(date,time) when contact was added to iPhone4.Thanks

Similar Messages

Maybe you are looking for