Is there pre-configured message mapping for SRM Content?

Hi,
My requirement is to do a message mapping between the SRM Message "Purchase Order Request" and the R/3 Idoc Orders01. Is there a preconfigured message mapping in SRM content or will I have to do it?
I see the generated proxy class from the outbound message interfacePurchaseOrderRequest_Out which will carry the message to XI and my requirement is to map it to the Interface ORDRSP.Orders01 Please let me know if there is a pre-configured message mapping for this ? or is the message mapping between the message "Purchase Order Request" and the R/3 IDOC ORDERS01 to be done by the developer himself?

HI,
There are mappings available in the predelivered SRM content from SAP.
Did you import the SRM content into the repository? If so , you can find this.
www.service.sap.com/ibc -> Integrated Business Content for mySAP SRM->
Hope this helps,
Rgds,
Moorthy
Message was edited by:
Krishna Moorthy P

Similar Messages

Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default

in use:
vRO 5.1
eclipse 3.7.2
vRo plug-sdk 5.1
steps:
1.create a plug-in project from samples(choose solar system)
2.find the dar package and upload it by vRo configuration
3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
problem:
Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default
How to solve it??
Thanks so much!!

There was problem from crm side...its working now..

Require a Message mapping for this Logic.

Hi Experts,
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Thanq very much in advance..
Edited by: Prashanth Bharadwaj on Oct 17, 2011 1:29 PM

Hi Prashanth,
Concatinate the two fields OrderNo and MaterialNo and follow the below logic which will resolve your problem.
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext-->IDOC
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(0,1)-->Delivery_Order_No
formatByExample>collapseContext>SplitByEachValue-->Recv_Date
FormatByExample:
input1:resulrOfSortByKey
input2:concatination>removecontext>sort-->SplitByValuChange
sortByKey:
input1:concatination-->removecontext
input2:date-->removecontext
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(1,1)-->Material_Num
formatByExample>sum>Recv_Quantity
FormatByExample:
input1:sortByKey
input2:concatination>removecontext>sort-->SplitByValueChange
SortByKey:
input1:concatination-->removecontext
input2:Quantity-->removeContext
Regards,
Priyanka.

JDBC adapter disconnects, if there are no message processing for 2 days

Hi All,
I have sender JDBC adapter configured, which polls messages every 3 mins.
XI is constantly polling the database (SQL Server) and since there are no messages on weekends, after a certain interval, it disconnects... giving a null exception.
I have checked the advance option "Disconnect from Database After Processing Each Message". still it is giving this error. I am on SP 12.
Can someone please let me know, what could be the reason of this null exception. why does it disconnects if there are no message processing for a long interval.
Any help would be appreciated.
Regards,
Amit

It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.

Exception in Message mapping for JDBC - XI- file

Hi,
In the above scenario, Sender JDBC adapter has processed the message but when i checked the processed XML messages, its giving an error message with details
<i>During the application mapping
com/sap/xi/tf/_MM_XXXX_a
com.sap.aii.utilxi.misc.api.BaseRuntimeException
was thrown: RuntimeException in Message-Mapping
transformatio~</i>
how to make the source structure so that it gets correctly populated with the result set of sender JDBC adapter? Are there any constraints while making the Data type for the source structure?
Regards,
Nitin Aggarwal.

Hi,
The problem is solved...
Actually, the runtime system was not able to map the result set generated by the Sender JDBC adapter to the source structure of message mapping. This was because the result set has a particular structure and its like
    <resultset>
      <row>
        <column1>value1</column1>
        <column2>value2<column2>
       </row>
    </resultset>
To map this kind of structure to the source structure, a <b>row</b> element should always be there below the root node and the structure fields should be placed as sub elements to row. One more thing the root node of the source structure should be same as the document name specified in the sender JDBC adapter config.
Anyways, Thanks to all for the valuable efforts.
Regards,
Nitin.

Why aren't there any English GPS maps for Japan?

I mean, why? There are GPS maps for almost every developed country, but for Japan there are none that i know of (neither Navteq nor Teleatlas, which are the two major cartography companies out there).
I've seen several Japanese GPS solutions, but they unfortunately don't have an English option. I've never seen a major company like TomTom or Garmin (among many others), offering a solution for that market.
So, what company does the cartography out there (Navteq or Teleatlas like), and why doesn't TomTom or Garmin use their data in order to develop an English GPS solution? There has to be some kind of logical explanation.
Kind Regards.

psychomania wrote:
Can you provide an official link for Garmin XT for the N8 and for Japan Road Navi 2.1?
As no doubt you were aware when posting Garmin Mobile Xt is now no longer available:http://www8.garmin.com/support/collection.jsp?product=010-11034-00
Since this is the only way of getting navigation for Japan, Pakistan and Cyprus which Nokia have choosen to avoid providing for with Nokia Maps, presumably you would rather OP was left in ignorance of technical feasibility of it's use upon Symbian devices.
Whereas under your profile it says "Please do not contact me asking for assistance in a personal message (that includes bringing posts to my attention), you will not receive help from me in that way" I have always been happy to provide further guidance should user so request under such situations.
Happy to have helped forum with a Support Ratio = 42.5

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

XI Message Mapping for ORDER03

Hello,
We are in the process of mapping ORDERS03 to xCBL (supplier needed this in the format).
We need to map IDTNR (ORDERS03\E1EDP01\E1EDP19) to vendor material if the QUALF (ORDERS03\E1EDP01\E1EDP19) value is 002.
Also, we need to map IDTNR (ORDERS03\E1EDP01\E1EDP19) to buyer material if the QUALF (ORDERS03\E1EDP01\E1EDP19) value is 001.
How can I achieve this? Please help.

Hi Ppeter,
ACtually I did something very similar in the message mapping and it depends also upon the exact structure and cardinality of your target nodes/elements.
So I give just one exmaple but your case might need a variant upon this :
So one option is that you only create the output node if the input node is available :
1)Position yourself in the targetmessage on the PARENT node of the vendor material element :
-add the QUALF
-add a constant '002'
-Use the standard StringCompare Function
-link the output to the node function 'CreateIf'
-link the createif to the target element ( = parent of vendor material )
2) Position yourself on the vendor material : link directly with the IDTNR
If the parent node contains other elements that need to be there independent of the vendor material, you can't use this of course. Then you can use a boolean function 'ifwithoutelse' instead of the 'createif' : if the qualf is 002 you link the IDTNR to the 'then' part of the ifwithoutelse and the output to the vendor material node
In any case, you might need to change the context from the QUALF ( right click / context ) to get the desired results
rgds
Dirk

Message mapping for checking hyphens (-) in material number

Hi All,
I have an interface in PI 7.1 for product change and product create coming from ORACLE to SAP
Now, the reqmt is to take the ORACLE product which could have hyphens or without hyphens
In SAP, the product can have upto 40 characters and if something without hyphens come in, then it adds leading zeros while creating and while changing, SAP expects a product with leading zeros
So, how do I handle this? How do I check in message mapping, the product with hyphens or without and write a condition to it.
Here is my idea
Take the product, use a message mapping function to check for products without hyphens and if YES, add leading zeros upto 40 characters
Can anyone let me know how this could be achieved using message mapping function
I am sure this kind of reqmt especially leading zeros for products is very common in PI interface circle
So, please let me know the details
Thx
mike

Hi Mike,
              your requirement can be solved without UDF too
inputfield ---------------->
                                             indexOf() ------------>
Constant(-)---------->                                                  less---->if ----->target field
constant(0)---------->
inputfield and contant (hyphen) are inputs to standard text function indexOf. Output of IndexOF and constant(zero) are inputs to standard arithmetic function less. Out put of less goes to boolean function if. The IF has two inputs then and else .
For then part write this logic
inputfield----> formatNumber()---->then
in standard arithmetic function Formatnumber specify number format with 40 zeroes, leave decimal separetor blank.
Now for the else part of "IF" write this
inputfield----->else
Finally
output of "IF" goes to target field
IF------>target
Regards
Anupam

Message Mapping for multiple item levels

Hi,
My query is regarding message mapping
Example of source data structure & Target data structure
Source data Structure
<item>
      --<no>1</no>
      --<address/>
      --<ITEMS>
        ----<item>
          ------<Name>a</Name>
        ----<item>
          ------<Name>b</Name>
<item>
      --<no>2</no>
      --<address/>
      --<ITEMS>
        ----<item>
          ------<Name>c</Name>
        ----<item>
          ------<Name>d</Name>
Expected Target data structure
<Item>
-- <no>1</no>
-- <name>a</name>
<Item>
-- <no>1</no>
-- <name>b</name>
<Item>
-- <no>2</no>
-- <name>c</name>
<Item>
-- <no>2</no>
-- <name>d</name>
How I can map the '<no>' field to target '<no>' field to repeat value until to second sub item level occurance complete ?
Thank you
Sateesh

Hi Sateesh,
Please see the solution below.
The are 2 contect changes you need to do on field level. Right click and go to context and select your context you need.
Context on ITEMS - Should be on Root Structure(In my mapping it is MT_Multiple_Item_Level_Source)
Context on Name - Should be on Item (The first Item Tag)
Good Luck.
Regards,
Jannus Botha

Executing a message mapping for each instance of a sub-message

Hi,
I have a message struct like the following.
MT_TEST (1..1)
|----
>IDOC (1..Unbounded)
There is a field in each instance of Idoc, depending on its value, I need to perform receiver determination.
The target for each IDOC instance will be different for each value of the field.
How do I write a XPath expression to achieve this?
Also, is there any other method of achieving the same goal?
Cheers,
Earlence

Hmmm.. so idoc is at source side..... Ok so multiple idocs are coming in one bundle BUT you cannot just divide the payload based on some conditions in Receiver Determination.
In your mapping you can map the source date to different targets but that is different thing.
Note: You can either send the whole payload to one receiver or nothing. You cannot send a part of the payload to 2 different receivers.
So it means it doesn't seems to be possible.
Regards,
Sarvesh

Fault Message Mapping for SOAP Scenario

Hi ,
I have configured a Proxy to SOAP synchronous scenario. The scenario is working fine. Now I need to map the fault message and display the message in SAP in case of any errors. I have used the standard Fault message. But I dont have any message from the WSDL which I can map to the standard fault message. Is it that we need to tell the wenservice team to modify the WSDL to include the fault message or is there any other way out to acheive the same.
Thanks
Amit

>>> Is it that we need to tell the wenservice team to modify the WSDL to include the fault message or is there any other way out to acheive the same?
Fault message is to provide meaningful message to the other end if there is a validation error or business exceptions or so...
a) You are importing WSDL of the third party and using it in soap receiver target side.
b) Normally it is best practice to create a WSDL which contains request, response and fault message. if your wsdl has fault message type declared then you can map the wsdl fault message with your proxy side fault message(which you can create). Please note you rely on the third party wsdl. Third party WSDL must have application logic coded to support fault message in case of application error occurs. Example if there is a validation that does not go through then their application logic must populate data in the fault message of wsdl. Then only if we map the wsdl fault msg to our proxy fault msg, we get meaningful fault details.
If your target WSDL does not support fault mesg, it is not going to be helpful at all.

Context handling in message mapping for an IDoc to File Scenario

Hi,
Can somebody help me with this issue. I have an Idoc to file scenario. heres my idoc structure. Its a custom Idoc
Header (1..1)
Detail (0..Unbounded)
         DependentDetail (0...Unbounded)              Note: This dependentdetail is a subelement of Detail
Trailer(1...1)
I created my target structrure the same way as the Idoc structure.
My output is a simple text file. I need the output in this format
Header
Detail1
   Dependentdetail1
   DependentDetail2
   DependentDetail3
Detail2
   DependentDetail1
   Dependentdetail2
Detail3
Detail4
Trailer
Since the Detail and Dependent Detail records are unbounded .
But right now i m getting my output like this:
Header
Detail1
Detail2
Detail3
Detail4
Trailer
But the DependentDetail record in not showing up in the output file. I didnot do any context change in my mapping. So do I need to do any context handling??...If so can somebody explain me with this.
Thanks,
Adam
Edited by: hymanroth on Apr 29, 2011 11:11 PM

Thanks Kenneth foryour quick reply,
Yes, I see the payload for Dependent detail in SXMB_MONI. So as you said earlier there's a problem with my content conversion.
my content conversion is as follows:
Header.fieldNames
Header.fieldFixedLengths
Header.endSeparator
Detail.fieldNames
Detail.fieldFixedLengths
Detail.endSeparator
DependentDetail.fieldNames
DependentDetail.fieldFixedLengths
DependentDetail.endSeparator
Trailer.fieldNames
Trailer.fieldFixedLengths
Trailer.endSeparator
So As I told earlier. With the above content conversion. I am not able to get the Dependent detail record in my output file. So If there is a change in my content conversion can u check it and tell me where I went wrong.
Thanks,
Harsh
Edited by: hymanroth on May 2, 2011 7:03 PM

Error while testing in message mapping for JDBC lookup

The error is as follows.
Exception during processing the payload.Problem when calling an adapter by using communication channel JLU_chan (Party: , Service: JLU_BUSS, Object ID: 0519f96e59c534829ebdcdea837dacb7) XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Missing ), ], or Item in query expression 'username = [Ljava.lang.String;@d7f610 and password = [Ljava.lang.String;@5b96eb'.'.
com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel JLU_chan (Party: , Service: JLU_BUSS, Object ID: 0519f96e59c534829ebdcdea837dacb7) XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Missing ), ], or Item in query expression 'username = [Ljava.lang.String;@d7f610 and password = [Ljava.lang.String;@5b96eb'.'.
     at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:131)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:68)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:149)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:77)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Root Cause:
com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Missing ), ], or Item in query expression 'username = [Ljava.lang.String;@d7f610 and password = [Ljava.lang.String;@5b96eb'.'.
     at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
     at com.sap.aii.af.service.api.AdapterAccess.execute(AdapterAccess.java:283)
     at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:123)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:68)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:149)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:77)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

I'll give you the query.Can you please check my code.Code is as follows.
//write your code here
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
//Build the Query String
Query = "Select role from login where username = " + username + " and password = " + password + "" ;
try{
//Determine a channel as created in the configuration
channel = LookupService.getChannel("JLU_BUSS","JLU_chan");
// Get a system accessor for a channel.As the call is being made to the database an database accessor is obtained.
accessor = LookupService.getDataBaseAccessor(channel);
// Execute the Query and get the values in the resultSet.
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();)
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("role"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!=null) accessor.close();
catch(Exception e){
result.addValue(e.getMessage());

FCP pre-created key mapping for other NLE's?

The key mapping feature of FCP is handy because you can set up
a custom keyboard that emulates another NLE editing system that you
might be more familiar with while learning FCP (i.e. Avid).
Does anybody know if anyone has created keyboard mapping
file presets for download or purchase? I'm interested in emulating
Pinnacle key mapping in FCP. I realize I can manually create it but thought
perhaps there was a source you could go to where it was already done
for you.
Any input would be appreciated.
Thanks.

I don't think there's any place to buy them.. you might find a user on here who has emulated something like that and could email it to you. I use a keyboard mapping similar to Avid but it really is the best of both keyboards in one IMHO.
it's easy to map so with the time spent searching you could probably make it to your liking.

Is there pre-configured message mapping for SRM Content?

Similar Messages

Maybe you are looking for