Is there way to use the 11gR1 JRF as an osgi bundle in 11gR2?

We've got a number of developers who want to use JDev 11gR2 for performance reasons, but we have to write software for 11gR1 Fusion Middleware. Is there a way to load the 11gR1 JRF and related dependencies as an osgi bundle? Or some other mechanism to accomplish the same? (Can I please have my cake and eat it too?)

No, I don't really have any documentation on it or anything. I just know that nothing like that exists :)
John

Similar Messages

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • HT204380 Is there a way of using the same FaceTime account on multiple devices?

    Is there a way of using the same FaceTime account on multiple devices?

    Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
    Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
    After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
    Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

  • I have my download list but I deleted the file on my computer and want it back, is there a way of using the list to get it back?

    I have the download list for firefox but accidentally deleted the file on my computer. I need the file and was wondering if there was a way of using the download list to access the file somehow, I don't think the file os on the internet either as I haven't found it

    Hello!<br>
    Go to the downloads window, right-click, and click "copy download link" or "go to download page". You should then be able to re-download it only if it's still in the downloads window

  • Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?

    Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably?  I don't see it listed in keyboard shortcuts; is there any way to add it?  Thanks!

    I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
    Here they are.
    Get information
    Open iMovie Help
    Command-Shift-Question Mark (?)
    Open the Project Properties window
    Command-J
    Open the Project Theme window
    Command-Shift-J
    Show playhead info
    Shows date, time, and keywords for video frames above the playhead.
    Command-Y
    Import and export
    Import from camera
    Command-I
    Export movie
    Command-E
    Play video
    Play video beginning from the frame beneath the pointer
    Space bar
    Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
    Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
    Left Bracket ([)
    Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
    Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
    Right Bracket (])
    Play selection
    Slash (/)
    Play selected event or project from the beginning
    Backslash (\)
    In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
    Right Arrow key
    In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
    This action works only if you’ve already sped up the playback.
    Left Arrow key
    When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
    Shift-Down Arrow key
    When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
    Shift-Up Arrow key
    When playing Event video, jump forward to the next clip
    Down Arrow key
    When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
    Up Arrow key
    Play the selected Event or project full screen
    Command-G
    Exit full-screen mode
    Escape (Esc) key
    Move the playhead by one frame
    Left Arrow key or Right Arrow key
    Freeze the playhead
    Hold down Control key
    When skimming, keep the cursor in the middle of the row
    Option-Shift
    Manage projects and events
    Create new project
    Command-N
    Move to Trash
    Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
    Command-Delete key
    Open iMovie preferences
    Command-Comma (,)
    Page setup
    Command-Shift-P
    Print selected Event or project filmstrips
    Command-P
    Select and edit video
    Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
    Command-A
    Select to playhead
    Expands or contracts the selection from the nearest selection border to the playhead.
    Shift-A
    Deselect all clips
    Command-Shift-A
    Add selected frames to project
    E
    Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
    Command-Shift-S
    Cut selected frames
    Command-X
    Copy selected frames
    Command-C
    Paste selected frames
    Command-V
    Paste all adjustments
    Command-Shift-V
    Paste video adjustments
    Command-Option-I
    Paste audio adjustments
    Command-Option-A
    Paste crop adjustments
    Command-Option-R
    Paste cutaway, green-screen, or picture-in-picture adjustments
    Pastes adjustments, depending on which type of video is selected.
    Command-Option-U
    Paste video effect

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Is there a way to use the preview in browser function without an Internet connection?

    This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

    Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

  • Is there a way to use the Picture viewer app with linked folders?

    I have a fairly extensive photo collection (literally in the tens of thousands we have taken over the years, and growing) on my PC that I have access to through BB link/file manager...one picture at a time...with no thumbnails...
    Is there any possible way to use the BlackBerry picture app with BlackBerry link folders?  All I want is to be able to hook up my Z30 via HDMI to the big screen and have the option for a slideshow from the archive on my PC without having to blindly stab at individual files and folders, and without having to copy whole folders of dozens or hundreds of photos to my phone.
    Thanks in advance!

    http://www.mebeam.com/
    Create a Chatroom.
    Adjust your Settings (Allow Flash to control your camera)
    Invite Buddies.
    7:55 PM Wednesday; February 20, 2008

  • TS1292 I lost itunes card is there a way to use the code on the receipt to redeem it?

    Lost itunes card is there a way to use the code on the receipt to redeem it?

    http://www.apple.com/feedback/iphone.html

  • HT4314 I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    See:
    Multiple game center accounts for...: Apple Support Communities

  • Is there way to remove the bar you use to move a JFrame?

    Is there way to remove the bar you use to move a JFrame? I don't want it there for several reasons, if you want, I will give more detail.

    I have seen a couple of posts in this forum suggesting to use a JWindow. Well, I can't get a JWindow to work. Here is the sample program I used.
    a) Without doing anything type "aaa"
    b) use tab key and then enter "bbb"
    c) click on text field then enter "ccc"
    d) use tab key
    e) click on Dos window and use Ctrl-C to kill application
    1) What is wrong with the Focus Manager. No caret is displayed in the text field or no 'rectangle' around the button.
    2) Why is 'aaa' displayed on the Dos window when you kill the application?
    3) I have seen a JWindow used in the JDK1.3 SwingSet2 demo, but it is only used to contain an image. Is a JWindow not meant to be used with other components?
    Any comments would be appreciated.
    import java.awt.*;
    import javax.swing.*;
    public class TestWindow extends JWindow
         public TestWindow()
              Toolkit tk = Toolkit.getDefaultToolkit();
              Dimension d = tk.getScreenSize();
              int width = 200, height = 200;
              setBounds((d.width - width) / 2, (d.height - height) / 2, width, height);
              JPanel panel = new JPanel();
              setContentPane(panel);
              JTextField textField = new JTextField(10);
              panel.add( textField );
              JButton button = new JButton("One");
              panel.add( button );
         public static void main(String[] args)
              JWindow window = new TestWindow();
              window.setVisible(true);

  • With the original ATV is there a way to use the usb port with external hard drive?

    Is there a way to use the usb with ATV1 and external hard drive?

    I have the same question and refuse to beleive that Apple would put the USB port there for a HD and not be able to use it for that purpose.

  • Is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

    is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

    Yes except i would like it to look like the itunes album artwork screen saver does.  the itunes album artwork screen saver shows a bunch of squares and when one of the boxes changes it spins and goes to the next album artwork
    what you have indicated above is kind of like a slide show where it shows you one of your pictures and zooms out to show you a collage version of another one of your pictures.  i would like it to be formatted similar to the way the itunes screen saver is.
    if you click on itunes artwork on the same menu as shown in your last post, you will see what i am trying to achieve.

  • Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Yes.
    1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
    2) Go through the standard configuration suggested by the setup "wizard"
    3) Then manually turn off the wireless function using AirPort Utility

Maybe you are looking for