Is this a correct implementation

I was looking into the Collections frame work source code of core java 1.5 and came across this.
Hashmap extends AbstractMap class
AbstractMap class has impleneted map interface
AGAIN
Hashmap implements map interface
is there any need to implement an interface twice in parent class and in the chil class.
Shasi

look here [http://forums.sun.com/thread.jspa?forumID=24&threadID=5246174|http://forums.sun.com/thread.jspa?forumID=24&threadID=5246174]

Similar Messages

Is this statement correct?------------QNo.101

Is this statement correct?
"You can use a resource plan instead of a consumer group to implement a priority within the plan."

To enable flashback database mode, the db needs to be in archivelog mode first.
The other part of this is when you actually use this functionality, both flashback logs and archive/redo logs are used. As always the basics are spelled out in the docu set:
"When a database is restored to its state at some past target time using Flashback Database, each block changed since that time is restored from the copy of the block in the flashback logs most immediately prior to the desired target time. The redo log is then used to re-apply changes since the time that block was copied to the flashback logs."
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/rpfbdb001.htm

DPS to iPad - Could someone clarify if this is correct please?

Hi All,
Is it possible I could pick someone's brains on this please? I think I've worked it out, just need to know if i have this right!
OK, here goes. I best start with what i intend to do. I shall be creating content for our local sales team on the road. So, first off, i don;t need to charge for content. This content (for now at least) wouldn't need a global audience so i don't need it available on either the apple or android store. So, in order for this to work, is the following procedure correct?
1) Content is created in Adobe indesign CS5.5. Type of content created are single page 'articles'. Each 'Article' has 100mb cap limit
2) 'Articles' are uploaded to Acrobat.com (Basic or Plus account for more than 1 published document) and assembled into 'folios' (2gb size limit on folio files?)
3) Access is assigned according to which Adobe ID's have been added to the sharing list (is there a limit to the amount of people you can share with?). Reciever of content would require a free adobe ID and the Adobe Content Viewer App (plus tablet device)
Apart from the learning curve of how to do what in Indesign, is the export process for what i intend to use it for correct?
Many thanks in advance for any help!
Kind regards
Scott

Hi Scott,
You are pretty much there.
1) Yes this is correct, you create an InDesign document, you can use either CS5 or 5.5. The pages contained within the document will be pages within your Article. If you want to have both a Portrait and Landscape version, shown when the iPad is rotated then you need to have two documents one containing landscape versions of your pages and the other containing portrait versions.
I usually create a folder named to match the Article name i.e. My Article, into that I save both documents naming them something like myarticle_h.indd, myarticle_v.indd, I also create two preview files, myarticle_h.jpg and myarticle_v.jpg and a "Table of Contents" preview file, this must be named tocPreview,png. If I have any associated files such as video or panoramas they go into an assets folder within the My Article folder.
In InDesign, after signing in to your Acrobat.com account via Folio Builder, you create a new Folio file using the builder. Once the folio is created it opens to the Article window and at this point I usually select Import from the dropdown menu and point to the folder, in this case My Article, that contains all my files.
Once the files are located and you select Okay the folio is built and uploaded to your Acrobat.com account.
2)Yes, in Acrobat.com they are refered to as workspaces. A free account can only contain one workspace at a time. A premium basic account can have 20 workspaces. I'm not sure if there is a limit on the size of a Folio/Workspace of 2gb perhaps someone else can advise on that.
If you want to share the Folio you can share it via the Folio Builder in InDesign by highlighting the Folio and selecting Share from the dropdown menu. Add the Acrobat.com email address of the people you want to give access to. Once you've done this you will see an icon with two people on it.
You can also share the workspace via the Acrobat.com dashboard as well.
3) Yes, but I'm pretty sure access is only available to those registered for an Acrobat.com account. You use the email address they used when registering, in some cases it may be the same as their Adobe ID. The reciever of the content has to have the Ipad, the Adobe Content Viewer app and the email address they registered with on Acrobat.com. Once they open the app and sign in the Folio will load with the word "FREE" in blue and a "Download" button.
As far as I know there isn't a limit on the number of people you can add to a share.
Tony

Is this the correct type of Ram for a mac mini?

I have a 2007 Mac mini, and want to go from 1gig to 2 gigs of Ram.
I currently have 2 512's
I need to know 2 things. (i'm pretty sure on both but i'm not a huge hardware guy to bare with me)
1. Will there be any compatibility problems? I.e if i upgrade to 2 gigs will it even help or because the rest of the computer is not being upgraded will it be useless?
2. If i'm good to go, Is this the correct type of Ram? http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=4E665783A5CA7304
Not sure if these are needed but will post anyway:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Type: DDR2 SDRAM
Thank you in advance <3

NO, it will NOT work.
You have to find the memory specific for Mac, and rule of thumb, Mac Intel chips usually take "ECC" memory. On occasions, You can get away with Non-ECC (on certain PPC Power Mac G5 towers) -- You can check on-line stores, like Newegg, Tigerdirect, or Goolge search for the Mac Mini memory. I got mine (for my two Mac 2,1) on line, and I put 4G (2x 2G), although only 3G was available.
It is worth of upgrade it. just need to find the right memory.

Frame Rate - Is this info correct?

If I have a 25 fps movie and I want to make an SD NTSC dvd I can drop it into encore and it will convert it to 29.97 so it will play in a region 1 dvd player automatically. However if I want to make a NTSC blue ray then I will need to have a region free blue ray player in order to play it because it will keep it at 25 unless I take it into another program to convert it to 24 or 29.97. Is all is this info correct? Thank you

It doesn't affect the original media.

When I forward an e-mail from my iPad or iPhone, the pictures in the signature and sent as attachments. How can this be corrected?

When I forward an e-mail from my iPad or iPhone, the pictures in the signature are sent as attachments. How can this be corrected?

See [[Blank messages in Hotmail]]

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

HT4914 I turned on iTunes Match, and subscribed; but it did not load all of my library. How can this be corrected so that I can recover all of my library?

I turned on iTunes Match, and subscribed; but it did not load all of my library. How can this be corrected?

iTunes Store: Subscribing to iTunes Match
After looking through the above link, and still doesn't help then try this below:
> iTunes Content: Downloading past purchases from App Store, iBookstore, and iTunes Store
> Non-iTunes Content: Transfer them from a different iDevice or from USB flash drive and/or external hard drive.
I don't use iTunes Match so I don't really know.
Message was edited by: keeferaf

Is this the correct syntax to submit a job using DBMS_JOB.SUBMIT?

Hello,
Is this the correct syntax to submit a job?
DECLARE
v_job_number NUMBER;
v_job_command VARCHAR2(1000) := 'PREPARE_ORACLE_TEXT_SEARCH;';
v_interval VARCHAR2(1000) := 'trunc(SYSDATE)+1+7/24';
BEGIN
DBMS_JOB.SUBMIT(v_job_number, v_job_command, sysdate, v_interval, false);
COMMIT;
END;
Thanks
Doug

DECLARE
v_job_number NUMBER;
v_job_command VARCHAR2(1000) := 'BEGIN
PREPARE_ORACLE_TEXT_SEARCH; END;';
v_interval VARCHAR2(1000) :=
'trunc(SYSDATE)+1+7/24';
BEGIN
DBMS_JOB.SUBMIT(v_job_number, v_job_command, sysdate,
v_interval, false);
COMMIT;
END;
About your error:
PLS-00201: identifier 'PREPARE_ORACLE_TEXT_SEARCH'
must be declared
ORA-06550: line 1, column 96:
PL/SQL: Statement ignored
The problem is that the job cannot find the procedure
(maybe own by an other user). The user who run the
job is not the same as the owner of the package.
Bye, AronYou forget the semicolon after END.
But we don't need here begin - end Block.
So it's OK.
v_job_command VARCHAR2(1000) := 'PREPARE_ORACLE_TEXT_SEARCH;'[b];
As you right mentioned, it is probably problem with owner or typo in the name of procedure.
Regards
Dmytro Dekhtyaryuk
Message was edited by:
dekhtyar

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

Well, I refuse to sign up to pay Adobe a monthly tribute for life too, but that doesn't mean we are limited to CS3.
I'm staying with CS6.
Adobe still sells a perpetual-license to Photoshop CS6 without the subscription model, but it's $700 for the Standard version and a cool $1,000 for the Extended version.
You haven't mentioned your platform, Macintosh or Windows, so make sure CS3 or any other obsolete version you buy actually runs on a modern operating system.
Good luck.

Is this a correct assumption about MacBooks?

I've always seen MacBook Pro as being the better option. I've always thought that MacBook Pro has always been a year ahead of the MacBook Air . Is this a correct or incorrect belief? If so, or if not, why? Like if I were to buy a 2012 MacBook Pro, it's just like purchasing a 2013 MacBook Air.or if I purchased a 2010 MacBook Pro, it's like buying a 2011 MacBook Air. Kinda like that.

That's not a realistic expectation, really. The MacBook Air will always be less powerful than a MacBook Pro - Apple offers the Air as an uber-lightweight model why the top of the line MacBook Pro can usually compare to a fast desktop machine. That doesn't mean that the Air will not share some of the technology of the Pro line, just that the Air is built for ultimate mobility instead of raw processing power. There's simply no correlation that presents this year Air with last years Pro.
Clinton

Why are photos save as .jpeg instead of .jpg? Can this be corrected?

Why are photos save as .jpeg instead of .jpg? Can this be corrected? In certain applications I have to manually change the ending so that the application can open the photo. Is there a setting to control to correct this?

When I mail photos (via GMail) from my iPhone they are received on my PC as .jpg files, even if sent at full resolution. Perhaps your e-mail service has imposed an attachment size limit, and in the process scales the attached picture down and alters the file extension?
What happens if you e-mail a photo from your iPhone and open the message from a PC instead of the Surface? What e-mail service are you using? (e.g. your ISP's service, or Yahoo, Gmail, iCloud, etc.) When you send the photo from your iPhone, are you selecting a reduced resolution?

Previewed book on iPad2 appears smaller on my bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of sizing the finished product while building it in iBooks Author?

Previewed book on iPad2 appears smaller on my Bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of normalizing the book's final dimensions for the Bookshelf while building it in iBooks Author?

When you submit to the store via iTunes Producer, you'll have a chance to choose a cover.

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?
GFS Didot is nearest listed MUSE font in appearance to Adobe Caslon Pro, which is the font used in the book which the website is intended to promote. I would like to use Adobe Caslon Pro (I paid for it and it's on my computer, but not in the cloud). Is there any way to install Adobe Caslon Pro as a MUSE font choice in the cloud?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Is this a correct implementation

Similar Messages

Maybe you are looking for