Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek Majchrowski

Wolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

Similar Messages

Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swiss

ais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

Integration of SAP GUI with SAP Web UI in 7.0?

Hi Everybody ,
Wanted to ask how do we integrate SAP GUI with SAP Web UI in 7.0?Are these two different logical systems or Web UI is embedded in GUI itself? Will be waiting for the answer very soon.
Thanks
Puneet

Hi,
in CRM70 the WebUI is the one and only userinterface for the endusers.
The SAP GUI in CRM is only for administrators.
You could integrate SAP GUI transactions from different systems (ERP, CRM, RM, etc.) into Webclient UI.
In standard SAP this is done using the transaction launcher (ITS) - but there are also some concepts from consulting companies to integrate the SAP GUI without ITS.
Good luck.
Kind regards
Manfred

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%. This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
Regualr occurence for me.
Also ... you need to let your battery work at least once per month. Let it run down to 40%, but not less if you can at all avoid it. Running thr battery fully dead will shorten the battery life significantly.

I have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi ,

i have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi , i live in india, bhopal city

Your only option is to sell the iPad and then buy the new one.
 Cheers, Tom

My Wi-Fi just says connecting, but never connects. I've rebooted the router and the phone.

Well that was it. My Wi-Fi just says connecting but never connects. I've rebooted the router and the phone. LG G2

ETea,
Sorry to hear about the trouble with Wi-Fi. Let's get you connecting again. Are other Wi-Fi capable devices able to connect without issue? Go to Settings and touch Wi-Fi. Touch your network and select "Forget." Touch "Search" on the bottom. Once the phone detects the network again, touch the network, enter your password and select connect. Let us know if you get connected.
BrianP_VZW
Follow Us on Twitter @VZWSupport

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

This is regarding interface from legacy system to SAP

Hi All,
We have trasferred the one file from legacy system to SAP, and it was created a session in SM35, it contains 1000 errors.
we don't want correct those errors and these entries should be delated, could you please let me know are these errors can I see in any error table in SAP, is this facility is availbe in SAP or not?
becuase it isl very difficult to go and delete the entries one by one in sm35
Regards
Nama

Hi,
1) No updates will have been done for the items with errors.
2) Mark the Batch, then press F2 to call up the analysis. You can check here for the cause.
3) If you are not going to correct the items or the cause so as to post them, just delete the batch.
Kind regards

How to connect from InformixDB to SQL Server 2012 (and copy data)

Hello guys
I try to build a connection from an Informix (Informix2000) database to my SQL Server 2012.
I really dont know how to do this...
The plan is to build a job in the night in which data is beeing copied from the InformixDB to my SQL Server 2012
The SQL server should be like a "archive server" (same data as informix DB , but the data should stay for 2 years)
Any idea if this is possible ? (what im trying to do)
Can i do this with ODBC Connection ?
Thanks a lot and Regards, Dominic

Thanks a lot guys... but what im trying to do is not to migrate the hole Informix DB to SQL 2012, i just want to copy some data into my SQL Server (archive). in the informix DB the data is only 30days back... i want to transfer every week
the data and let it on the SQL Server 2 years back. (SQL Server should be like an archive system)
Hello ,
Then you need to create an SSIS package to migrate data from Informix to SQL Server 2008 since Informix is old I dont know which connection provider to use but you can try ADO.NET connection provider
Can you check below link
http://davidbridge.wordpress.com/2012/05/30/extraction-from-informix-database-using-ssis-data-warehouse-etl/
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Advantages of sap gui over sap web

hi experts,
currently we are using sap gui. but we experiencing some slowing especially on peak working hours where users are making use of many transactions. I know that this is normal on those cases. My question is, if we are going for sap web. will it be more faster? efficient to use than the sap gui? this will be in terms of exporting reports and transactions. We havent tried the sap web yet. But we assume that, if we have it on web, it will be faster since only the data will be loaded and no more application gui.
Please suggest.
Thank you in advance

Hi,
I don't think it will give best result from performance point of view.
In your case, it's problem with huge load during peak hours, not with GUI you are using. Slowness during peak hours can be reduced by tunning your system from memory and resource point of view. SAP GUI and SAP WEB do not make big difference in terms of performance and response.
There are more disadvantages than advantages. SAP WEB needs more network capacity and graphics do not look good.
Hope it helps.
Thanks,
Siva Kumar

SAP GUI for SAP BW 3.5 on linux RHEL 4 oracle 10.2.0.2 & kernel 6.40

Hi all,
Pls let me know wat version of SAP GUI can i use for "SAP BW 3.5 on linux RHEL 4 oracle 10.2.0.2 & kernel 6.40" and where can i find it in service market place.
Thanks in advance.
Praveen

use my links:
software is located at ftp://ftp.sap.com/pub/sapgui/win/640/compilation5
patch is at ftp://ftp.sap.com/pub/sapgui/win/640/patches
in summary you need to download and install these components in this order:
1. ftp://ftp.sap.com/pub/sapgui/win/640/compilation5/50078731_4.zip
2. ftp://ftp.sap.com/pub/sapgui/win/640/patches/gui640_26-10001615.exe
3. ftp://ftp.sap.com/pub/sapgui/win/640/patches/bw350_12-10001615.exe
so, you install SAPGUI, patch SAPGUI, patch BW add-on from SAPGUI.
about your 23/24 patch question, you only need to install the latest, so, that would be patch 24 in your case... but you should install the latest one which in patch 26. use my links!

SAP Gui 7.20 SAPLOGON_INI_FILE and central saplogontree.xml

I want to set a central "saplogontree.xml" on server for SAP Gui 7.20. But the INI-File should be set by the environment-variable.
But the proble is, that when I set the environment-variable, I cannot set a central "saplogontree.xml". The point in the options where you can set it, disappears. The GUI also ignores the registry-key.
When I delete the environment-variable, I see the point for setting the central "saplogontree.xml" and it works.
Is this correct or is it a bug??
Thanks and greetings!

This may be your answer / solution.
SAPgui 7.20 - Patch 2 - SapLogonTree.xml
Regards,
Zecher

Having Trouble Connecting To Xbox Live using my router and wireless adapter.

Okay, so this is kinda long but I'll try and speed through. Recently I moved from my old place to a newer place (larger) and before, my old spot worked perfectly, no troubles. Now, eversince i got my internet cable service re-hooked up I've had problems. My internet is fine, that's not the problem. It's my xbox live for my 360. My cable guy pretty much set up my living room with the main router and not my studio office which I keep my 360 in. Instead he told me it would be much easier to just go out and buy a wireless adapter for my PC to recieve the signal from my living room off the main family computer. Well, went out and bought a $80.00 wireless adapter top of the line and it works perfectly, I get the internet really fast. Problem is, my 360 will not connect now. It always says DNS failed. Well here's the problem. I have a Linksys router in my studio office that sits on top of my PC that i have connected to the ethernet of my PC, then in the 2nd or 1st port i have my 360ethernet wire connected to my xbox360. Still it says DNS failed. Shouldn't my router be getting the signal from my Wireless adapter that it's receiving from the living room? It's connected through the same computer yet it doesnt connect. It finds my I address, and it finds the network adapter yet it always fails my DNS. I've tried evern switching the xbox360 ethernet to the main ethernet port on my pc and that just makes me fail the IP address test. I need help guys. My wireless adapter for the pc is a Belkin but my router is a linksys and not sure if the 360 just doesnt recognize it or not. Is there settings I'm missing or something? Please help!!!
The Burninator...

On your 360 if u getting an error msg DNS failed,you can login to your router setup page and go to status tab, not the Static DNS1 and DNS2 numbers and u can give a static dns to your 360. its will resolve ur issue.

Is this possible? Transfering from one to another...

Hi, I have two ipod video on my hands: one i have been using for past year or so, the other one is still unopened brand new. Both 30gb. Just wondering if it's possible to somehow have everything i have on the old ipod transffered to the new one.
I see that songs are all named "ABCD" in ipod...if i copied all those folders onto the new one, will it still have the same song names and information adn favourites as the old one?
Thank you for your helpp!

So the music is no longer in your iTunes library? If it were, it would simply be a matter of connecting the new iPod and transferring it from your library.
You need to get the music from the old iPod to iTunes. Read on.
First of all try this method which works on some Windows PCs.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This is a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.

Is this possible to connect Trex 6 To EP7?

Hi Experts,
We did instal Trex 6.0 and it's working with EP6 Portal, now We install a Sandbox EP7 to do some test, I'm just wondering can I connect this to current Trex or I should install new Trex 7.0?
Thanks,
Matryam

Francesco, as long as I know it's WLS 5.1 that doesn't support WTC and not Tuxedo
6.5. We are using Tuxedo 6.5 and WLS 6.1.
The xml configuration file is only on the WTC (therefore WLS) side.
But you also need to modify the Tuxedo configuration file.
There are some messages posted to this newsgroup that tell you how to configure
both sides.
Ciao,
Stefano
"Francesco" <[email protected]> wrote:
>
Hi all,
We need to invoke EJBs located on WLS 5.1 from Tuxedo 6.5
Is it possible via WTC or do we need to use a newer version or Tuxedo
I have read the WTC docs and they speak about an XML Configuration File(ref.
"Create
a Configuration File").
But as much as I know Tuxedo 6.5 uses plain text config files.
Can anybody suggest me the right steps for creating a configuration file
with
the versions of Tuxedo and WLS that I have mentioned?
Thanks a lot
Francesco

Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Similar Messages

Maybe you are looking for