Is Time Machine tied to a computer or a user?

Basically what I'd like to know is, if I have a TM drive that is backing up my whole computer, will it work regardless of which user is active? Or will TM only work when a specified user is active?
THanks very much.

It'll work for all user accounts. Click here for more information.
(123122)

Similar Messages

  • I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
    Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
    Anyway, any help is appreciated. Thanks.

  • Searching time machine backup on different computer

    I have 3 computers backed up by time machine onto one hard drive. How do I search time machine for a backup of a computer I am not currently using? I did use the control key and was prompted for which disk to search,and clicked on that, but then it just switches me back and only shows the backups of the same computer I am using at the moment. I want to search a time machine backup of a computer that is no longer functional.

    This was actually solved in the 10.7.1 or 10.7.2 update.

  • Time Machine stops due to computer going into Sleep/Hibernation Mode

    Time Machine stops due to computer going into Sleep/Hibernation Mode then restarts to try to start the Back up process again and again vicious cycle. I have made sure all settings are turned off. I have done one or two backups since the initial first backup. My HDD is almost full and I want it backed up before I try to clone/mirror the drive to upgrade it to a 1TB HDD. Thank you in advance. 

    Set the Energy Saver (in System Preferences) to Never. Then reset the NVRAM, as follows:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    Release the keys.

  • How to backup from Time Machine of a different computer

    I want to restore my emails from time machine from a different computer?

    Look at the Pondini web site and it should be able to address all of your Time Machine questions.
    http://pondini.org/OSX/Setup.html
    Ciao.

  • How do I retrieve files from a backup hard drive (was backed up using Time Machine) on a different computer

    how do I retrieve files from a backup hard drive (was backed up using Time Machine) on a different computer?

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

  • Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Yes.  See:
    http://pondini.org/TM/4.html
    My only concern is that you may not have enough free space on the drive.

  • Access Time Machine backup through different computer

    Hi, I have a 1TB Time capsule and I have my Macbook pro and my mother's macbook pro backing up to it. If one of our computers were to crash, could we go about getting a file from time machine through the other computer? I tried the right-clicking on time machine and selecting 'browse other time machine disk', but that only shows the backup for the computer im using, not anybody elses. any help?

    Try mounting the "sparsebundle" file for the other computer before you invoke the "browse other ..." option.  If that works, please let me know.

  • How do you get time machine to reset your computer to the specific date you would like?

    How do you get time machine to reset your computer to the specific date you would like?

    Hey carlleeh,
    Thanks for the question. The following resource may guide you through that process:
    OS X Mountain Lion: Recover your entire system
    http://support.apple.com/kb/PH11192
    Thanks,
    Matt M.

  • Time Machine makes the Host Computer unusable

    I have been running Time Machine for some time now. Long enough that it started notifying me that it was deleting older backups. Shortly thereafter my computer (24" IMac) started to run very slow. So slow that it would take several seconds to type a 4 letter word and the mouse movement delay was several seconds. I went to the control panel and turned Time Machine off. That did not help. So I next disconnected the firewire disk that is hosting the Time Machine backup and my computer returned to normal.
    So what do I do now? For obvious reasons I am reluctant to reconnect the Time Machine disk. Any suggestions on what might have happened and/or how I can safely reinstate Time Machine?

    Obviously you are running out of space on the backup drive causing TM delays as it combs through data to determine what can be deleted to make up the space. That would suggest you need a new, larger hard drive for TM backups - might consider doubling the size at the least.
    To continue with the new drive you want to clone your old backup to the new drive so you will need enclosures for both drives.
    Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new backup drive.
    Source means the old backup drive.
    Be sure to prep the new drive as follows:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Be sure you only use Disk Utility or SuperDuper! to clone the TM backup correctly.

  • HT201250 Since time machine backed up my computer does that mean I can delete files so I can increase storage space on my hard drive?

    Since time machine backed up my computer does that mean I can delete files so I can increase storage space on my hard drive?

    NO!
    Time Machine is not an Archival Backup. It will keep files for a while, but if it needs the space, it will delete files that no longer exist on the hard drive.
    Get a couple external drives and move the files to both of them.

  • Restore using Time Machine to new hard drive, but last "full" backup was 2012.  how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

    Restore using Time Machine to new hard drive, but last "full" backup was in 2012.  How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user? 
    I entered Iphoto for my user and only photo up until 2012 were in the library.  I thought the restore would do the incremental Time Machine backups too.....
    Running 10.8.2

    It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • Help: cannot retrieve old files from Time Machine backup on new computer!

    I backed up my old Macbook Pro for several months. I've got a new Macbook Pro and I succeeded to restore the last content of the old one using the migration assistant.
    However, now I need some older files that I know are in the backup, but I can't restore them because you apparently can only do that with the computer from which you made the backups... a Time Machine backup is 'tied' to the sparsebundle using the MAC-address of the computer...
    I don't have my old computer anymore, does this really mean that all the old file in the backup are lost for me? Or is there an other way?
    Please help.
    Wim

    Wimek,
    According to this KB article (http://support.apple.com/kb/TS1760)
    "When upgrading from one Leopard-based Mac to a new Leopard-based Mac, and you wish to use Time Machine backups from the previous Mac, make sure the computer name of the new Mac (in Sharing preferences) is the same as your previous Mac's computer name was when its Time Machine backups were made. Afterwards, if the previous Mac is still on your network, give it a different computer name."

  • Can't view time machine backups from old computer on new computer

    My macbook pro laptop recently died and I am trying to access its time machine backup data through Finder on a different computer.  In each one of my folders from different dates, however, the majority of the computer folders I would like to access (i.e. desktop, documents, dropbox, etc) have a little red "no" sign in the corner and prompt the following message when selected:
    "The folder “FolderName” can’t be opened because you don’t have permission to see its contents"
    How can I gain permission to see its contents? As the former user, I know whatever passwords are restricting these files, but I don't know how/where to go to give permission to these folders. I've tried going into Disk Utility and changing the permissions there, but to no avail, despite successful changing of the "Sharing & Permissions" to "Read & Write" for all listed accounts.
    I'm currently trying to view this on an imac OSX 10.6.8. The dead MacBook pro ran OSX
    thanks
    kate

    Hi Kate,
    It sounds like you're running into an issue trying to recover that was on your previous Mac from a Time Machine backup. The article linked below will walk you through the process of recovering the data from your older Mac's Time Machine backup.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    http://support.apple.com/kb/HT4889
    Time Machine or other disk migration
    If Migration Assistant isn't running on the target (new) Mac, open Migration Assistant (located in /Applications/Utilities/), select "From another Mac, PC, Time Machine backup, or other disk" then click Continue.
    Connect your external hard drive if necessary.
    Type in your admin password when prompted and click OK.
    When the target Mac asks you for a migration method, select "From a Time Machine backup or other disk", then click Continue.
    Select the Drive, Time Machine backup, or Time Capsule. If you select Time Capsule you will be prompted to enter the Time Capsule password. After entering the password, select the Time Machine backup.
    Close all other applications on the source Mac, then click Continue to start the migration options.
    The source Mac will ask you to select items to migrate.
    You can customize your selection by clicking to open the disclosure triangles.
    After you click Continue, the Migration Assistant will begin to transfer files to the target Mac. The amount of time that it takes for migration to complete depends on the amount of data being transferred and the speed of the network.
    Note: To view documents that were migrated, choose Log Out from the Apple () menu, then login as the migrated user. The migrated documents will be located in the migrated user's home folder.
    I hope this helps.
    -Jason

  • Time Machine backup from previous computer

    So I just traded in my 2009 iMac for a Mac Pro. I had backed up everything from the iMac using Time Machine. Is getting all that info back on the new Pro as easy as turning it on, mounting the Time Machine drive and getting it rolling? Or is there a step I'd be missing. Don't want to screw it up!
    Thanks in advance!

    NO!
    It is easier.
    When you start up your new computer, it will run the Setup Assistant. During that process it will ask you if you want to bring forward your previous data, and ask you to specify where it is.
    Because you are running nearly the same class of Mac, you can do this without much worry. If converting from an older Mac, especially PowerPC to Intel, you should be careful NOT to migrate your Old Applications, because they will not be optimized for Intel Processors and may exhibit wieird problems.
    Some here would suggest that you should re-install ALL your Applications anyway, regardless of what they were running on before. If any Application gives you trouble, that would be the first thing to do -- re-Install from the original CD/DVD.

Maybe you are looking for