Is Windows Server 2012 compatible with HP Officejet pro 8600 plus printers

Hello,
I am wondering whether HP officejet pro 8600 plus printers compatible with Windows server 2012 - I have the driver installed on the server and deployed - installation of the driver and all was successful but it won't print from the server or on a user's computer from the deployed printers list. No error message comes up, I just click print and nothing happens. If I install it individually on the user computers - it seems to print as a 'network printer' but won't print from the server, and if it can not print from the server then it can not print from the deployed printers list. I was looking up on driver compatibility list online earlier and could not find Windows Server 2012 mentioned on the list - only server 2008 and below.
Essentially what I am trying to find out is whether this officejet pro 8600 plus printer is compatible with our server.
Many thanks,
Michael Peters

Hello Michael, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at the HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Troubleshoot scan to email officejet pro 8600 plus

printer cannot connect to the server. Name and address both verified by ISP. any other suggestions?

Hello kaybe123,
Welcome to the HP Support Forums!
It appears that you are unable to Scan to Email with the Officejet Pro 8600 Plus, getting server connection errors. I would like to offer a few suggestions that I hope will help you get this working.
Check for updates on the printer, Getting the Latest Firmware and Product Updates.
Power off the printer and ensure the power cord is connected to a wall out let.
Next you want to power reset the router. If it has a power button press that, if not, remove the power cord. Wait 60 seconds and then allow it to power back up. Once router is fully on, power up the printer.
Test the Scan to Email, if it works there is no need to continue. If it doesn't, try the next suggestion.
Refer to this Thread answered by a colleague of mine happytohelp01 : Efax 7510 still won't work after turning off/on ePrint several times. Follow the steps to setup a Manual I.P and DNS for the printer over the network. The steps will be the same, if not very similar for your printer as the one in the above post.
Try to Scan to Email once done. If still unable to Scan to Email, continue below.
Go back to the above Thread, rather than using the DNS suggested try this set; Primary DNS Server : 209.244.0.3 & Secondary DNS Server : 209.244.0.4.
Try to Scan to Email, if the feature is still not working you will need to call HP's Cloud Support team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the Technical Support number for your country/region.
Best of luck.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet Pro 8600 Plus will not send or receive fax

I have connected the fax machine to the phone outlet, the fax machine dials to another fax machine, the connection sounds like it is being made (the receiving fax machine sends out a noise signalling that it has received a phone call) and then the HP Officejet Pro 8600 Plus says that is is "Connecting" but no fax is sent. Nor can I receive a fax, even though the phone rings on the Officejet Pro 8600 Plus. The error code I get is Error 388 which is that a communication error occurred during fax transmission. However, this message occurs regardless of the fax number that I send to, and I had the recipient check that the receiving fax machine was working fine for transmittals from others.
Is it possible that the proble is that I cannot send or receive faxes through a digital phone line? That seems odd to me given that almost all phone lines in the modern era are digital. How do I send and receive faxes with the Officejet Pro 8600 Plus if the only phone lines available are digital? Also, 4 months ago, I used the same phone line for the same machine, and the fax function worked, but my phone provider assures me that the only phone lines that they have ever provided are digital.
Thank you.

Hello,
I am sorry to hear you are having issues with the fax functionality on your Officejet 8600 plus. I have found a document that has several troubleshooting steps you can try to narrow down the issue. I know some of these steps you have already done, but there might be a few that you haven't, like there is a HP test fax service you can use to test functionality.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en#N226
Good luck!
I work for HP, However, I am speaking for myself and not for HP

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

HP Print Software for MacBook Pro and Windows 7 gone awry on HP OfficeJet Pro 8600

Almost one year ago today I wrote a post about my first problem with HP OfficeJet Pro 8600 N911. Today I write my last.
I have an HP OJP 8600, with option Tray 2 included, and auto feed included. My system test computers are:
1. Apple MacBook Pro, OS X 9.5, HP software is the only 3rd party software.
2. HP Laptop, Windows 7.
The OJP wireless radio gave up, so I cannot run it wirelessly. It is connected by ethernet to my router. All five of my computers can use. All of the functions of the printer are usable. For example: it prints, it scans, it copies, it faxes. All functions working. My problem is with the HP software download to the Apple and to the HP Laptop.
I would like to be able to use all of the feature settings when I print. But alas, I cannot. Both the Apple and the HP Laptop have a similar appearing window that opens when you choose to print something. In theory, you are supposed to be able to control a range of paper types and quality, print type and quality, and (in my case with the two trays) what tray to use to select the paper.
I regret neither of the computers perform these functions. And all of the mistakes that I find on the Apple computer I find on the HP Laptop Windows 7 computer.
I don't have the time to test every combination. But I think the table below will help you get an idea of what the problem is with the software that HP sends offshore for maintenance.
The results of the paper quality selection, the print quality selection, and the tray availability are as follows:
PAPER PRINT QUALITY TRAY AVAILABILITY
Plain Paper
Plain Paper DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
Thick Paper DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
InkJet
Other DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Specialty
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Card   DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
Brochure
HP Brochure DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
In summary the new HP Print software for Apple and Windows 7 computers has identical programming mistakes on both operating systems. Under no circumstances can I use the MAX DPI setting.
The user cannot use the features that are built in to the HP software because the paper selections override the locked tray, the print quality, and the unusually small list of HP selection of papers.
It is time to invoke my warrenty rights. There are too many systemic problems with the software and the device. I don't have any more time to act as an unpaid system test analyst for HP.
Who do I contact to use my warrenty before it runs out in a few weeks?

Hi,
Those are not programming mistakes, but those are limitations of the product, please check the printer specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
As you may find under Paper-handling specifications > Paper tray capacities, Tray 2 only support Plain Paper.
Maximum DPI is only only supported on Photo Paper, therefore those limitations are applicable.. these limitations are also listed on the Printing Specifications section above, Maximum DPI is listed as 4800 by 1200 dpi:
Color print resolution: HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi)
As well that can be find listed within the Print photos on photo paper or the Print borderless documents sections, you may simply search for Maximum DPI within the user guide as a reference:
http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf
Those are not an issues with the printer but those expected limitations fully meet the product specification.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I print 4x6 photos on an HP Officejet Pro 8600 Plus via Windows Photo Viewer or Gallery

Dear Experts, I've got an HP Officejet Pro 8600 printer with just one paper tray in which I loaded 4x6 photo paper.
The printer was purchased in January 2014, the latest drivers are installed. Now I would like to print a single 4x6 photo using Windows Photo Viewer or Gallery.I loaded the 4x6 photo paper into the tray as indicated by the little icon labeled 4x6in, so I suppose I got the HW part right. It's just the SW part which gives me a hard time. The available paper size options in Windows Photo Viewer and Gallerydon't include photo paper sizes, just the standard paper and envelope sizes.Hence I checked in the HP Printer Assistant in "Set Preferences" what kind of paper sizes are available, and there is exactly the same list as proposed by Gallery, missing photo paper sizes. So I guess Gallery just picks the sizes from the driver and ther are no photo paper sizes. This is an issue because I prefer to print from my PC using Win 7 or Win 8 and not from a SD card or a USB stick. Any help is very welcome, thank you in advance!

Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6, 5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats you are limited by the driver to what is typically available in an office, in this case: A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Poor image quality when scanning coins with officejet pro 8600 plus

I recently upgraded my printer from an HP 2210 to and HP officejet pro 8600 plus. image quality on coin scans is terrible.
I have tried scanning both with the HP software and with windows 7 fax and scan software
I have saved images as BMP, JPG, PNG, and TIFF
I have used resolutions from 300 dpi to 1200 DPI
All give me similar unacceptable results.
Images are better when scanned flat on the scanner than when in slabbed holders, and from this I am guessing that the plastic is somehow interfering wiht the scan. Either that, or there is a very shallow depth of field so that even moving the coin a few mm away from the glass moves it out of focus. But even a raw coin placed directly on the glass has significantly worse image quality than the old 2100.
The first image is a coin scanned with the old 2100. The second has been scanned in a similar slab by the 8600

Hi terry_renee,
Welcome to the HP Forums! I am happy to help you with this scanning issue! I did a test with an HP Officejet 8600, at 1200 dpi, and no plastic covering. Just the quarter on the glass, and we cropped it to the quarter. This is the result.
I have a few questions for you:
What Operating System are you using for scanning? Windows or Mac? What version?
What scanning software are you using?
Are you scanning from the computer, or the printer's control panel?
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maverick incompatible with Officejet Pro 8600 Plus

Maverick update for OSX 10.9 is incompatible with Officejet Pro 8600 Plus.
1. PDF files from webpages are black and don't show info when I try to print from any browser. Must take snapshots from webpage and print from that
2.Printer info shows that it is still printing when it is completed and will not advance to the next job
Please help! I see that there are no HP software updates to fix this and am confused why you haven't made your printer software compatible with a huge Mac update.
This question was solved.
View Solution.

Hi podisc,
Thank you for the quick response. It's good to hear you can print, that is at least a start.
I know that you haven't received the error messages that the document lists but the behavior you are describing leads me to believe that software didn't completely uninstall or completely install with the Mavericks driver.
Please follow the steps listed in the document below and let me know how it goes.
An 'Unsupported Operating System' or 'Software not compatible' Message Displays on a Mac Running OS X v10.9 Mavericks
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03976994
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Officejet Pro 8600 Plus copy prints with black streaks

I just bought an HP Officejet Pro 8600 Plus and it seems to work great at printing; however, when I tried to copy something, the copy came out with black streaks that nearly render the print illegible and are the most dark/condensed towards the left hand side of page.
How do I fix this problem?
This question was solved.
View Solution.

Hi,
It could be due to the scan calibration issue during power on.
Power off the Printer, make sure scan lid closed properly. Now power it on, it will do scan calibration.
Now try to do the copy and see the results.
Hope it will help you.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Officejet Pro 8600 plus: trouble with double sided printing

I have just installed Officejet Pro 8600 plus. My iMac is running on OS X 10.9.2
I want to print a double sided brochure. And I have succeeded. However, the printing on one side of the paper is upside down.
To achieve this:
Print <Copies & Pages <Layout - turn on two-sided - long edge binding
Layout direction is greyed out
How can I fix this please

Hello xxzz,
Welcome to the HP Forums.
I see that the flip on long edge option is greyed out for you when you try to print double sided. I will try to help you with this.
Usually if an option is greyed out, it indicates that the software wasn't installed completely or correctly. That or the printer isn't capable of the task. Knowing that this printer is able to duplex, it could be a problem with the software/drivers.
Try the following.
Uninstall the software.
Reset the print system.
Verify/Repair disk permissions
Re-install the software - software download
Test to see if you're now able to choose the options.
Let me know how things go, thank you for posting on the HP Forums.
I worked on behalf of HP.

Officejet Pro 8600 Plus prints with some programs, but not others.

I have a new Officejet Pro 8600 Plus connected with an Apple Airport Extreme. My iPad and Dell will print without problems. My MacBookPro using OS 10.6.8 will print iPhoto and Excell when using Parallels. It will not print using Appleworks or Office for the Mac. The Mac recognizes the printer and will print the test page. When told to print in Appleworks, the computer says it is printing, but nothing is happening.

Hello homeonthefarm,
Welcome to the HP Support Forums!
I understand you are able to print from an iPad and Dell PC with the Officejet 8600, but unable to from your Mac 10.6.8. Since it will print from the other sources it would appear to me that the printer software is not installed correctly on the Mac.
Try uninstalling the printer software, when you are running the HP Uninstaller, just prior to clicking uninstall I would like you to hold down the Control, Option & Command button then click uninstall.
When ready to install the printer, HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8.
I hope this suggestion helps.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Is Windows Server 2012 compatible with HP Officejet pro 8600 plus printers

Similar Messages

Maybe you are looking for