ISE Alarm : Critical : Profiler SNMP Request Failure : Server

Ok, so this alarm is coming in repeatedly and is now on my projects list.  I get email alerts from the server that list thr NAD IP as the endpoint device and the Endpoint IP address is correct.  I've checked the settings and the endpoint is not listed as a NAD in ISE (ver 1.2).
Profiler SNMP Request Failure
Details :
Profiler SNMP Request Failure : Server=xxx-xxx-xxx; NAD Address=10.253.124.194; Endpoint IP Address=10.253.124.194
Description :
SNMP request times out, or SNMP community/user auth data is incorrect.
Suggested Actions :
Please ensure if SNMP is running on the NAD and verify that SNMP configuration on ISE matches on NAD
*** This message is generated by Cisco Identity Services Engine (ISE) ***
Has anyone seen this come in before?
PS - Why is the IOS for ISE so cut down?  Looks like something you would get from an Apple product.
Thanks,
Clark

Hello,
Please follow below CiscoLink:
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mnt.html
Profiler SNMP Request Failure
Either the SNMP request timed out or the SNMP community or user authentication data is incorrect.
Ensure that SNMP is running on the NAD and verify that SNMP configuration on Cisco ISE matches with NAD.
Also ensure what snmp version device is using.
Thanks,

Similar Messages

  • ISE Alarm: Warning: Profiler Queue Size Limit Reached

    Anyone know what this error means and more importantly, is it anything to really be concerned about?  We started receiving this today for one of our PSNs and have been getting the alert every five minutes.  There hasn't been any 'known' impacts from this but it's very annoying and the Cisco documentation is a little vague.
    Thank you....

    Hmm, I am sorry but I will have to ask more questions:
    1. You mentioned that your PSNs are behind a load balancer, but are the nodes in a "node group?" If they are not you should place them in a node group. If they are you will need to split them as the max recommended nodes per node group is 10. 
    2. If the nodes are indeed in a node group are they all L2 adjacent?
    3. If your deployment consists of VMs and not physical appliances, can you confirm that both the adequate CPU/RAM are allocated and reserved for the VMs?
    Here are also some recommendations:
    1. If possible, move to IOS sensor on all of your switches and disable the probes that will no longer be needed. 
    2. If #1 is not possible check the configurations on your NADs and where Device Sensor is configured you should remove, IP Helper and SNMP Query based configs. This will prevent duplicate information from being sent to the PSNs
    3. Look to completely eliminate SNMP Traps based configurations for ISE. That probe along with Netflow and the Span probes are pretty heavy hitters
    4. Make sure that you are using Device Sensor on your WLCs as well
    5. Use the latest patch
    6. Get a support case going with Cisco and have them take a look :)
    For more info you should take a look at the following Cisco Live Sessions:
    BRKSEC-3697 and BRKSEC-3699
    Thank you for rating helpful posts!

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

  • Exceeds data buffer size discarding this snmp request

    Morning
    Cisco Prime LMS 4.2.3 is sending SNMP request too big for asa interface buffer.
    LMS is running on Windows server
    incoming SNMP request (528 bytes) from IP address x.x.x.x  Port  50592  Interface "inside" exceeds data buffer size, discarding this SNMP  request.
    212005: incoming SNMP request (%d bytes) from %s exceeds data buffer size, discarding this SNMP request.
    It is very much like this error
    Error Message    %PIX-3-212005: incoming SNMP request (number bytes) on interface
    interface_name exceeds data buffer size, discarding this SNMP request.
    Explanation    This is an SNMP message. This message reports that the length of the incoming SNMP  request, destined for the firewall, exceeds the size of the internal data buffer (512 bytes) used for  storing the request during internal processing; therefore, the firewall is unable to process this request.  This does not affect the SNMP traffic passing through the firewall via any interface.
    Recommended Action    Have the SNMP management station resend the request with a shorter length,  for example, instead of querying multiple MIB variables in one request, try querying only one MIB  variable in a request. This may involve modifying the configuration of the SNMP manager software.
    how do I change the SNMP request size in LMS?
    I can only find the following that might be an option
    http://blogs.technet.com/b/mihai/archive/2012/05/14/reducing-the-maximum-number-of-oids-queried-in-a-single-batch-in-om-2012.aspx
    any thoughts on the matter would be appreciated
    just using default settings with snmpv3

    Bug in lms 4.2.3
    CSCtj88629            Bug Details
    SNMP packet size requests from LMS is too large
    Symptom:
    LMS sends more than 512 SNMP requests to the FWSM, so it rejects the requests.
    Conditions:
    This occurs with FWSM and ASA's.
    Workaround:
    None.
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj88629

  • WLC with ISE as radius and also external web server

    Hi friends,
    I am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.
    I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?
    So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
    any suggestions would be higly appreciated guys!
    Regards,
    Mohit

    Hi mohit,
    Please make sure the below steps for guest auth thru ISE,
    1)Add the WLC in your ISE as netork devices.
    2)In Guest SSID you need to choose the pre authentication acl.That acl should allow the below traffic
        a. any to ISE
        b.ISE to any
        c.any to dns server
        d.dns to any
    3)The external redirect url will be 
    https://ip address:8443/guestportal/Login.action
    4)AAA server for that SSId would be your ISE ip with port number 1812.
    5)In advanced tab please choose the AAA override. No need of radius nac.
    6)Create appropriate authorization profile in ISE for guest.Example is below ,

  • WLC is not responding to SNMP requests.

    Customer is using a 4400 WLC.
    He has a management tool that works using the SNMP logs from the controller, he can ping the
    controller using this management tool, but when he sends SNMP requests from the management tool the
    WLC doesn't reply.
    The SNMP server IP address is 192.168.122.11 and the WLC's IP address is  10.20.1.31.
    I have the following debug taken from the switchport where the WLC is connected.
    'debug snmp agent' shows some interesting messages that confirms that the WLC is not sending a packet back.
    Cisco Controller) >debug  snmp agent enable
    (Cisco Controller) >*SNMPTask: Feb 06 14:38:44.616: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
    *SNMPTask: Feb 06 14:38:44.616: SNMPD: Failed to build in SnmpMessage.
    1145 Debug Messages have been dropped*SNMPTask: Feb 06 14:38:44.616: SNMPD: *NOT* sending out packet, out_packet_len = 0
    *SNMPTask: Feb 06 14:38:47.621: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
    *SNMPTask: Feb 06 14:38:47.621: SNMPD: Failed to build in SnmpMessage.
    *SNMPTask: Feb 06 14:38:47.621: SNMPD: *NOT* sending out packet, out_packet_len = 0
    *SNMPTask: Feb 06 14:38:50.652: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
    *SNMPTask: Feb 06 14:38:50.652: SNMPD: Failed to build in SnmpMessage.
    *SNMPTask: Feb 06 14:38:50.652: SNMPD: *NOT* sending out packet, out_packet_len = 0
    *SNMPTask: Feb 06 14:38:53.684: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
    *SNMPTask: Feb 06 14:38:53.684: SNMPD: Failed to build in SnmpMessage.
    *SNMPTask: Feb 06 14:38:53.684: SNMPD: *NOT* sending out packet, out_packet_len = 0
    *SNMPTask: Feb 06 14:38:56.715: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
    *SNMPTask: Feb 06 14:38:56.715: SNMPD: Failed to build in SnmpMessage.
    *SNMPTask: Feb 06 14:38:56.715: SNMPD: *NOT* sending out packet, out_packet_len = 0
    *SNMPTask: Feb 06 14:38:59.747: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
    *SNMPTask: Feb 06 14:38:59.747: SNMPD: Failed to build in SnmpMessage.
    *SNMPTask: Feb 06 14:38:59.747: SNMPD: *NOT* sending out packet, out_packet_len = 0
    I have also a packet capture taken from the same switchport, I attach it here.
    What could be the reason for not responding?

    You need to add the management tool in the WLC as a trap reciever.
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • Request Failure on IASr2 startup on W2k.

    I am having problems restarting IASr2 on W2k. Before I shut down the machine, I do the Stop HTTP server 2, Stop HTTP Server 1, Alter System Checkpoint, and then I go into W2k services and shutdown IASDB(no errors)...
    When I reboot and do the Start HTTP server 1 or 2, I am getting this error:"Request failure -- 0 of 3 processes started." or sometimes "...1 of 4 processes started".
    My only solution right now is to restore from a coldbackup, and then re-apply my work and the data.
    Why can't IASr2 tolerate a simple planned reboot of W2k? I thought it was supposed to be a high-availability product. This is a pristine install per Oracle install procedures.
    Any ideas?

    Dear sandeepchoudhary21,
    thank you for you explanation, but this is the output
    Build Type....................................... DATA + WPS
    so do i have to enable data encrytion on dtls license ?
    http://www.cisco.com/en/US/docs/wireless/controller/5700/software/release/3se/lwap/configuration_guide/b_ap-config_32se_5700_cg_chapter_011.html
    thank you very much

  • Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

  • Error while sending SOAP Request to server through XML Spy

    i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
    <b><u>Http error : could not POST File</u></b>
    It would be good if u explain step by step procedure how to solve the issue.
    Thanks & Regards.,
    Pushparaju.B

    This is the error showing after clicking OK button after it showed the error
    Http error : could not POST File
    <b><?xml version="1.0"?>
    <!-- see the documentation -->
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
         <SOAP:Body>
              <SOAP:Fault>
                   <faultcode>SOAP:Server</faultcode>
                   <faultstring>Server Error</faultstring>
                   <detail>
                        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                             <context>XIAdapter</context>
                             <code>DeliveryException</code>
                             <text><![CDATA[
    com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
         at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
              ]]></text>
                        </s:SystemError>
                   </detail>
              </SOAP:Fault>
         </SOAP:Body>
    </SOAP:Envelope></b>
    yes i have the role of XIAPPLUSER
    scenario has created by me and i have the authorization to enter into XI

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Uploading Photos to MobileMe Gallery results in "Request to Server Failed"

    Hello everyone!
    I've run across a very frustrating problem.
    I am wanting to upload some photos to a MobileMe gallery from within iPhoto '08 (Version 7.1.4; Mac OS X 10.4.11). When I start the upload, it runs for several minutes and the progress bar appears with the message "Uploading Thumbnails". After several minutes of this (usually the progress bar gets about 1/4 of the way through), I get an error message that says "Request to Server Failed". If I try to then restart the upload by clicking on the alert icon next to the gallery name in the sidebar, the gallery disappears.
    I have tried deleting the iPhoto caches from ~/Library/Caches and the "com.apple.iPhoto.plist" file from ~/Library/Preferences. I have logged out of MobileMe from System Preferences and had iPhoto log me back in. Nothing seems to work. I keep getting this error.
    I have published photos to .Mac Gallery in the past (but not since the transition to MobileMe. Those galleries are still there on the web and listed in the sidebar. I'm afraid of messing with them though for fear that they too will disappear.
    I've done Google searches and searches here on Apple Discussions and found no definite solutions.
    I could really use some help on this one. Any assistance would be greatly appreciated!
    Thank you!

    How many galleries do you have? If only a few try deleting them manually from the iDisk/Web/Sites/_gallery folder and republish from iPhoto.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Problem with Profile-Update-Request

    I have a problem when I Try to use the profile update request.
    First, I can use the "User-Data-Request" without problems. I use this sentences:
    ->String docSel="sh://sip:[email protected]/IMSPublicIdentity/";
    ->Document doc = psvc.getDocument(docSel);
    But, when I Try to add a new line to modify the document (I send the same document witohout changes it):
    ->psvc.putDocument(docSel, doc)
    I receive this exception:
    java.lang.IllegalArgumentException: Access key invalid for request at com.bea.wcp.diameter.sh.ShSession.createRequest(ShSession.java:40)
    at com.bea.wcp.diameter.sh.ShSession.createPUR (ShSession.java:26)
    at com.bea.wcp.diameter.sh.ShApplication.putDocument(ShApplication.java:147)
    at com.bea.wcp.diameter.sh.WlssShApplication.putDocument(WlssShApplication.java:79)
    at com.bea.wcp.profile.ShProviderDirect.putDocument(ShProviderDirect.java:63)
    at com.bea.wcp.profile.ShProviderCached.putDocument(ShProviderCached.java:65)
    at com.bea.wcp.sip.engine.WlssProfileService.putDocument(WlssProfileService.java:320)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3217)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1984)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1891)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
    Whats it's the problem?I think that I´m using the correct sentences to
    send the profile, and I don´t know why receive this exception.
    ´Thanks, david.

    I try to use RepositoryData and I obtain an exception too, but it´s different. In this case is:
    ####<13-feb-2008 16H09' CET> <Error> <Kernel> <CANASD-HP> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1202915357551> <BEA-000802> <ExecuteRequest failed
    java.lang.NullPointerException: .
    java.lang.NullPointerException:
         at com.bea.wcp.diameter.Request.sendAnswer(Request.java:197)
         at com.bea.wcp.diameter.Answer.commit(Answer.java:125)
         at com.bea.wcp.diameter.Session.sndMessage(Session.java:232)
         at com.bea.wcp.diameter.Answer.send(Answer.java:118)
         at com.bea.wcp.diameter.Transaction$1.run(Transaction.java:165)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
    For the HSS I´m using a simulator called FHoSS. Do you know that this simulator work well with WLSS?
    Thanks.

  • Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

    Hello,
    Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
    Unknown Host
    Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
    Can anyone help me please, and the same website is accessible with my phone.
    Help me please. :(
    Regards
    -

    Try http://www.transitbux.com/
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • SNMP Requests from Solaris

    Hi, I am new to Solaris and have some questions about SNMP.
    Does Solaris (9,10) include any binaries that allow you to make SNMP request to external equipment such as routers or other SNMP hardware?
    I am considering the possibility of using a shell script to pull SNMP data from network elements, save it to a text file and render it to a web page.
    Does that sound about right? I figured if binaries exist for this than it should be doable.
    Thanks
    j

    Hi, I am new to Solaris and have some questions about SNMP.
    Does Solaris (9,10) include any binaries that allow you to make SNMP request to external equipment such as routers or other SNMP hardware?
    I am considering the possibility of using a shell script to pull SNMP data from network elements, save it to a text file and render it to a web page.
    Does that sound about right? I figured if binaries exist for this than it should be doable.
    Thanks
    j

  • Zone shutdown error - SNMP request returned error status 6 (no access)

    When trying to shutdown a zone though SunMC it get the following error from the web page
    SNMP request returned error status 6 (no access) snmp://xx.xx.com:nnnn/mod/scm-container/Zones/ZoneTable/ZoneEntry/zoneState#zonename
    the log on the agent has
    [0000008f 00a8 ]warning Nov 28 12:20:10 agent preValidateSetPDU: zoneState(zonename) [1.3.6.1.4.1.42.2
    .12.2.2.85.6.1.1.10.10.98.111.116.97.110.105.120.45.97.100] - noAccess
    I probably am missing a simple undocumented permissions problem.
    Any help would be appreciated
    Thanks

    marcusj99 wrote:
    When trying to shutdown a zone though SunMC it get the following error from the web page
    SNMP request returned error status 6 (no access) snmp://xx.xx.com:nnnn/mod/scm-container/Zones/ZoneTable/ZoneEntry/zoneState#zonename
    the log on the agent has
    [0000008f 00a8 ]warning Nov 28 12:20:10 agent preValidateSetPDU: zoneState(zonename) [1.3.6.1.4.1.42.2
    .12.2.2.85.6.1.1.10.10.98.111.116.97.110.105.120.45.97.100] - noAccess
    I probably am missing a simple undocumented permissions problem.
    Any help would be appreciatedSCM security can be tricky to get right the first time you use it. Have you performed these operations in the global zone?:
    - run es-config to add your SunMC userID to the scm-container ACL?
    - made sure the Project Managment and Pool Management entries are in /etc/security/prof_attr and exec_attr files?
    - added your SunMC userID to the Zone/Pool/Project entries in /etc/user_attr (or used the 'usermod' command to add the entries for you)?
    If any of those steps were missed then SunMC (or Solaris) may not believe you have permisson to make changes to zones/pools etc. There are a couple of SCM docs listed in with the SunMC doc set:
    http://docs.sun.com/app/docs/coll/810.8?l=en
    Regards,
    [email protected]
    http://www.HalcyonInc.com
    New !! : http://forums.HalcyonInc.com !!

Maybe you are looking for