ISE upgrade from 1.1 to 1.2.1 - lost CLI admin password?

Hi,
In a mysterious way I lost CLI Admin password in whole my ISE deployment (6 PSN, 1 ADM and 1 MNT node). I wondering how it is possible? Last time I logged to the nodes when I upgrade my deployment from ISE 1.1 to 1.2.1. Is this possible that I could lost password during this upgrade?
Regards
Gunter

Hello Gunter-
You should have not lost/locked the admin account due to the upgrade. Nonetheless, you will have to follow the CLI password recovery procedure:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_postins.html#pgfId-1189908
Thank you for rating helpful posts!

Similar Messages

  • When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Websites remembering you and automatically log you in is stored in a cookie.
    *Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    *Tools > Options > Privacy > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear Cookies
    *do not clear Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

  • I upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?

    i upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?
    having said that i have an i pad as well and when i backed up i got the contacts which are on the i pad on my new iphone 5 not the ones who were on
    i phone 4s ...
    any one can advise me please what to do to get my stuff from iphone 4s to iphone 5 ,rather than the stuff from my ipad ?

    If you made a backup using icloud, then restore your 5 to that backup.  http://support.apple.com/kb/HT4859

  • Hello - I upgraded from photoshop cc to cc 2014 and lost my plug ins.  How can I move them into cc 2014? Thanks

    Hello - I upgraded from photoshop cc to cc 2014 and lost my plug ins.  How can I move them into cc 2014? Thanks

    The install of 2014 doesn't move or copy anything from a previous version, with the exception of settings. You can go into your Photoshop CC installation folder, navigate to your plugins folder and then just copy all the plugins you've installed from that folder and into the Photoshop CC 2014 plugins folder. The plugins should then be available in 2014 the next time you launch Photoshop.
    The only thing that may prevent this from working is if you're using the 32bit version of Photoshop CC. Photoshop CC 2014 is 64bit only so 32bit plugins don't work. If this is the case for you, check out the manufacturer of the plugins and see if they have 64bit versions available.

  • I upgraded from v3 to v6. Firefox Sync lost hundreds of my bookmarks - it kept all the organised ones, but lost all the unsorteds. I'm now facing an inquiry at work, and could cheerfully kill Mozilla. However, is there any way to fix this?

    I upgraded from v3 to v6. Firefox Sync lost hundreds of my bookmarks - it kept all the organised ones, but lost all the unsorted's. I'm now facing an inquiry at work, and could cheerfully kill Mozilla. However, is there any way to fix this?

    I did read what you posted, and will point out once more - the organised bookmarks were kept, the unsorted - the majority - were lost. I tried accessing them THROUGH sync as I couldn't find them before I started sync and thought that might help. Really didn't. Sync was only loaded with version 6, never used it on 3. Updated from 3 to 6; tried to find bookmarks. All unsorted ones GONE. accessed sync; no bookmarks. went back to three. never shifting again, version 6 is a quick trip to hell. Should have known not to trust the program to preserve bookmarks, blame myself for being so bloody stupid to trust it to keep my information safe. Moral: always save multiple backups.

  • Upgrade from 6.x to 7.01 today lost saved passwords (Win7) (installation folder is \program files (x86)\Mozilla Firefox 4.0 Beta 10\

    I was alerted to new version when Ubuntu upgraded yesterday; this morning I did manual upgrade on Windows 7, and all my saved passwords and bookmarks are gone. History seems to be complete, and somehow this morning (without my noticing any crash) Firefox prompted me to restore the previous session, and then gave me windows from yesterday.

    Solved: Firefox 7.01 was installed "as admin" from user account and it started up using admin profile. Restart of Firefox returned me to user profile.

  • I just upgraded from a 4s to a 5s and lost my photos

    I just upgraded from a 4s to a 5s and when I did, I made sure to back everything up to the cloud.  Now I have pictures that I need from there and I can't get them.  How do I retrieve my pictures from the icloud to my phone?

    Did you restore the iCloud backup of your 4s to your 5s?

  • Upgraded from 3.6.23 to 9.01, lost ability to receive video portion of chat, computer is OK- back to 3.6.23???

    my mac book pro, 10.6.8 works fine, as does appl photobooth, still pix and video, google chat people can hear me and see me OK, I can hear them but no video--wife uses her mac, with ff3.6.23 and MAC OS 10.6.8--works OK, see above, problem began when I went from 3.6.23 to 9.01, please tell me the fix-- or do I just go back to 3.6.23????

    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

  • Upgrade from Photoshop CS3 to CS4 - PNG alpha lost???

    I use Photoshop for all of my graphics in Final Cut Pro.  I have been using Photoshop CS3 for a long time, creating .png titles with alpha's with no problem.  I just upgraded to Photoshop CS4 and now my .png files don't have alpha channels.  What happened and how do I fix it?
    Thanks,
    John

    I am creating High Def Graphics (1920x1080) for use within Final Cut Pro.  I am talking about the transparency.  What do you mean by a swf?  Are you talking Flash?  I'm not sure that would work.  Sorry for the confusion.
    John

  • Cisco ISE 1.2 vm cli admin password recovery

    I'm having trouble getting this to work.   I was under the impression by mounting the ISO (connect at power on) i could perform the password recovery like it states for the hardware appliance.  However, if i mount the 1.2.0.899 iso image (connect at power) I don't seen to get any options in my vm console?  At most, I have a <enter> at the very beginning that will take me to Grub or ADE boot menu...  but I don't see anything about options to change the password?  

    Make sure you are following the steps in the following link:
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_postins.html#38674
    Also, make sure that the VM Guest is set to boot from DVD/CD first before trying the HDD. 
    Thank you for rating helpful posts!

  • No Sound Devises Detected on my Laptop after an Upgrade from Vista to Windows 7 !

    I   own a hp dv9720us laptop.   I  upgraded from vista to windows 7, and have lost all sound. I've tried about everything , but nothing worked. hp 's site say they no  longer support  driver updates , since 2010. Can anyone help me , Please ?
                                                                                                                                       JIM

    Hi,
    Have you checked this ?
      http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-Windows-7-Upgrade-Guide-for-HP-L...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PDF files won't open after upgrade from 9 to 10 or 11

    After upgrading from Reader 9 to Reader 10, I lost the ability to open PDF files on my Win 7 laptop.  Even the icons became blank white blocks. I reinstalled Reader 9 and it all worked as usual. In trying Reader 11, it happened again.  Any thoughts?

    Thank you for your reply. Allow me to clarify.
    After installing Reader 10 or 11, the icons for PDFs on my desktop changed from the typical PDF icon to a blank white icon like when the extension of a file has been changed or omitted. Double clicking the icon no longer opens the PDF file. Yes, Reader opens but I no longer was able to open any preexisting PDF files using the new version of Reader. I did try changing away from protected mode to no avail.
    I do not have a screen shot as I have downgraded to Reader 9. I have scanned thoroughly for malware and viruses and none have been found.
    Thank you again. I look forward to your further comments.
    Sent from my iPhone.
    Please pardon brevity, misspellings, and autocorrect hijinks.

  • Is there a way to change plugins from 32bit to 64 bit,upgrading from ap2 to apt i've lost 4 programmes.

    Is there a way to change plugins from 32bit to 64 bit,upgrading from Aperture 2 to Aperture 3 i've lost 4 programmes after upgrading from snow leopard to mountain lion,also lost my cs2 photoshop programme,an expensive upgrade!

    You have to look at the manufacturer's web site, if there are recent updates to 64 bit. For some plug-ins recent updates have been available. But you cannot turn a 32-bit plug-in into a 64-bit plug-in by setting an option. It needs to be compiled differently for a different architecture.
    To be used with Aperture 3.4.1 in Mt. Lion your plug-ins will also need to be compatible with sand-boxing, the new security feature, see:
    Aperture 3.4 and later: Some third-party plug-ins are no longer compatible
    Regards
    Léonie

  • Upgrade from ISE 1.1.4 to 1.2 (VMWare)

    We are planning to do an upgrade on our ISE runing on VMWare. Our current version is 1.1.4 and we are planning to upgrade it to 1.2. Based on released notes, 1.2 is running on 64-bit and we are currently using 32-bit on our ISE. I have red all releases notes and upgrade guide from Cisco and all doesn't include the upgrade process from 32-bit to 64-bit. I have created the draft for the upgrade plan, here is what I am thinking for the upgrade. Create backup of ISE 1.1.4, install ISE 1.2 to new VMs then restore the databases from 1.4 and from then will upgrade the databases to 1.2.

    Hi,
    You can run the upgrade stright on, the v1.2 installer takes care of 32 to 64bit conversion.
    Edit: You will need to change host OS from RHEL 5 32bit to RHEL 5 64bit.
    Is this a stand alone ISE or a depoymentof more then one?
    If you have a deployment you can start with your secondary PAN (admin) node. When done the secondary announces that it's v1.2 and when you upgrade the next node, a PSN, it will conect automatically to secondary PAN. 
    It can be problems when upgrading ISE, but with my latest customer going to 1.2 everything worked as it should. 
    But I did prepare for the worst with backup of DB, backup of certifiactes + pvk, having access to AD admins etc.
    Tip is to copy the upgrade file to the local disk and run upgrade from there and to reset the DB on the PSN nodes to shorten the time of the upgrade.
    See this
    https://supportforums.cisco.com/community/netpro/security/aaa/blog/2013/07/19/upgrading-to-identity-services-engine-ise-12
    See here for more info on depolyment upgrade.
    http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_011.html
    Tarik has a good post about upgrade to 1.2 as well:
    https://supportforums.cisco.com/message/4077655?tstart=0#4077655
    Cheers
    Message was edited by: Mikael

  • ISE Upgrade Fails from 1.1.0 to 1.1.2.145

    Hi,
    I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.
    DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1
    Save the current ADE-OS running configuration? (yes/no) [yes] ?
    Generating configuration...
    Saved the ADE-OS running configuration to startup successfully
    Initiating Application Upgrade...
    Stopping ISE application before upgrade...
    Running ISE Database upgrade...
    % Application upgrade failed. Please check logs for more details.
    Regards

    Hi,
    Try to go to v1.1.1 first, add patch 3 and then go to v1.1.2.
    From ISE relaese notes:
    Upgrade from Cisco ISE, Release 1.1.1 to release 1.1.2
    Before you can upgrade to Cisco ISE, Release 1.1.2, you must first be sure you have upgraded your machine to Cisco ISE, Release 1.1.1 with patch 3 applied. For specific instructions on performing the upgrade procedure, see the Cisco Identity Services Engine Upgrade Guide, Release 1.1.x.
    HTH

Maybe you are looking for

  • Why won't my program run when I schedule it.

    I am trying to schedule an executable and it says it is successful, but the program never runs.  I even tried setting up a simple batch file that will call the program and when I schedule it it says successful but never runs. When I run it on the des

  • Hard Disk Wonderment????

    Hi guys, I was wondering if i could have some peoples advice. I currently use a macbook pro with a 100 gig 7200 rpm Hard Disk, i use it for music production using logic 8. Im finding that with the amount of the work i'm currently doing (especially no

  • 8100 WITH NO SOUND

    Can anybody please help, I have a Blackberry Pearl 8100 and for some reason the speaker/sound has stopped working - as in, no call/email/text, daily alarm alert sounds, can I fix this or is the phone just 'broken'?  Obviously I have taken battery and

  • How do I get the file name?

    I'm kind of new to javascript -- working with a colleague who has Adobe Acrobat Professional -- I've got an *old* version of Adobe Acrobat and most of the functions don't work -- but how do we get the file name -- we're trying to develop an applicati

  • After saving GRN part1 tab not get enabled

    Hi, All excise details get reflected in GRN from PO , i have entered all details such as excise number, Excise date etc related all data excise. But after saving GRN part 1 tab not got enabled which contains serial number , part1 number . which is no