ISE Wired 802.1x with Foundry access switch ,not show "Device Port"

Our customer wanna enable wired 802.1x for user and machine authentication on Foundry Switch.
They want to use ISE as radius server.We try it ,but the ISE report can't show which port the client is connectd on the switch.
We get the tcp dump packets from ISE.It shows that the "nas-port-id" radius attribute is not sent out by foundry switch,but it sends "nas-port".
Is it possible to let foundry switch send "nas-port-id" attribute in the radius request packet ?
Or is it possible to let ISE show "nas-port" attribute value on the authentication report ?
Thanks.

Similar Messages

IPad 3 Mailboxes not showing even after syncing with iMac and switching on SSL and port readings the same; even tried rebuild. Switched iPad off, rebooted and discovered settings went back to preset?

Hi to all techies,
Ipad3 with new iMail does not show mailboxes. Have tried swithcing SSL on and making port same number 993 as imac; then telling imail in imac to synchronise but to no avail still no mailboxes appearing on ipad mail. My husbands new ipad air worked straight away same OS?

I'm sorry. I probably wasn't clear enough in my response. What I am saying is that one can create mailboxes in the Mac mail app and those mailboxes can be for local storage only - the "on my Mac" mailboxes. Those do sync to any other device. The ability to creat those mailboxes is a feature of the Mac mail app.
You cannot create additional mailboxes on the iPad unless your email account is an IMAP account. I am not familiar with BT internet at all so I don't know if you have IMAP or not. I assume that your husband has the same email provider and if his mailboxes did sync to the iPad, then yours should as well.
You can check to be sure if you don't know if your email account is an IMAP account. If you go to your email account in the iPad Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom. If an new mailbox appears, you have IMAP.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

Thanks very much for your help, but I'm still overlooking something. I double checked to make sure that I did not have a hidden .txt file extention. I then decided to abandon the lock on preferences idea until I get it working. I converted my mozilla.cfg file back to plain text. I made sure I do not have an extra blank line at the end of each file. The syntax looks good, as far as I can tell. I'll copy and paste what I have so far. Did I have the file locations correct posted above? Also, if you feel i can delete some lines of text in my mozilla.cfg file I'll be happy to do so.
mozilla.cfg
<pre><nowiki>//
pref("privacy.sanitize.sanitizeOnShutdown", true);
pref("privacy.sanitize.promptOnSanitize", false);
pref("browser.rights.override", true);
pref(“app.update.auto”, false);
pref(“extensions.blocklist.enabled”, false);
pref(“extensions.shownselectionUI”, true);
pref(“browser.shell.checkDefaultBrowser”, false);
pref(“toolkit.telemetry.enabled”, false);
pref(“toolkit.telemetry.prompted”, 2);
pref(“toolkit.telemetry.rejected”, true);
pref(“app.update.auto”, false);
pref(“browser.download.useDownloadDir”, true);
pref(“browser.search.update”, false);
pref(“signon.autofillForms”, false);
pref(“signon.rememberSignons”, false);
pref(“browser.download.manager.scanWhenDone”, true);
pref(“browser.formfill.enable”, false);
pref(“xpinstall.enabled”, true);</nowiki></pre>
channel-prefs.js
pref("app.update.channel", "release");
override.ini
[XRE]
EnableProfileMigrator=false
all-lmc.js
pref("general.config.filename", "mozilla.cfg");
defaultPref("browser.startup.homepage", "data:text/plain,browser.startup.homepage=http://bbc.co.uk");
Again, thank you very much for your time. Do I create my own browserconfig.properties, and firefox.js? Also, I forgot to mention I'm running Windows 8.

Wired 802.1x with PEAP

I have manage to get wired 802.1x working using Windows Active Directory as the database. With machine authentication, single-signon can be achieved.
Setup:
C3750 switch - Cisco ACS 3.2 - Windows AD
Sequence of events:
1. 802.1x machine authentication
2. User logs in to domain
3. 802.1x with user credentials
But, I have the following issues:
i. If user logs in using local account, it takes 3 minutes (default dot1x switch timers) for the port to turn unauthorized. Is it possible to place the port in unauthorized state immediately?
ii. If the user 802.1x login has dynamic VLAN assignment, the AD scripts do not run. It seems that the AD scripts can't run if there is a change of IP address upon login (difference in VLAN for 'machine authentication' and 'user login').
Any solution for this?
Tks

2 issues here:
*Cached credentials for Microsoft supplicannts. Microsoft's authentication strategy in general reflects, and WLAN roaming would be difficult without the use of cached credentials. If cached credentials are not desired, would recommend another supplicant.
* Falied Authentication for a local account. It should try to dot1x authenticate this user. For PEAP as an example, you would see the username as \. Now, a port will only be placed into a HELD state if a RADIUS-Reject is sent to the switch. A RADIUS-Reject will only be sent to the switch if the attempt is actually "failed" as opposed to silently discarded, packet lost in transit, etc. Taking 3 minutes to actually fail an attempt is indeed way too long, but the switch is probably doing what RADIUS is telling it to do. (this can be verified by a sniffer trace or debugs). Correspinding logs on RADIUS would help as well.

Wired 802.1x With Static IP on endopoints

Hi all
Someone know if a 802.1x implementation with Cisco ISE, works with static IP in the endpoints or there are any issue in this deployment?
I have a lab deployment but does not work fine with a static IP in the client (laptop) but when i work with DHCP works fine.
The authentication and authorization process in ISE is successfull, and the port status in switch is AUTHORIZED, the VLAN assignment is right.
Thanks

I have deployed ISE in the past with static IPs and did not have any issues as long as the VLAN that was being assigned to the port matches the VLAN that the subnet of the static IP resides in.
What is the behavior of the endpoint and what issues are you seeing?
Thank you for rating helpful posts!

ISE - Local site admin only has access to local users/devices?

Hi All,
I'm trying to configure ISE so that a local site administrator can only edit devices and users in his location, and only view reports/authentications for users at that location. I've tried setting the data access permissions to only view his location in all locations, but he can still view users authenticating on all devices.
Does anyone have any ideas how we can filter the reports so that he only sees his site users?
Thanks,
Joe

Cisco ISE 1.2 allows you to define role-based access control (RBAC) policies that allow or deny certain system-operation permissions to an administrator. Below is how you can assign roles, based on access to reports , to two different admins.
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_admin.html

Handoff switch not showing on iPad settings?

I Have just updated my 3rd generation iPad to iOS 8.0, and the first thing I looked for was the handoff feature, but the switch is not showing. I turned it on on my iPhone 5s running iOS 8. I thought it'd work after turning Bluetooth on, but nothing changed.

Handoff is not available on the third generation iPad. It works on the iPad 4 and up.
Some features may not be available for all countries or all areas. Click here to see complete list.
Continuity features are available on iPhone 5 or later, iPad (4th generation), iPad Air, iPad mini, iPad mini with Retina display, and iPod touch (5th generation).
Additional charges may apply when using your device’s cellular network.
*Check with your carrier for hotspot availability.
https://www.apple.com/ios/whats-new/continuity/

Picture i take with my iPhone are not showing up in iCloud on my mac book pro?

Can anyone help ,Why photos are not showing up in the cloud

Just to be clear, photos can not be accessed directly from iCloud.com.
Be sure you are signed into iCloud on your Mac with the same Apple ID as your iPhone and Photos is checked:
System Preferences > iCloud
Then be sure My Photo Stream is checked in iPhoto:
In iPhoto > Preferences > iCloud

Access Tab not showing for item level security

I have enabled item level security for the portal page I am working on, but the access tab for the items is not showing.
I have come accross exactly the same problem on this forum and the advice was:
Hi try the following :
go to page properties
set the item level security
clear the cache
clear your browser cache
it should work "
I have tried all that, closed and opened a browser but the access tab is still not showing. This is a 10.1.4 portal on LINUX. Starnge enough I have a testing environment installed on my Windows XP (AS 10.2.0.2 not upgarded to 10.1.4) and I don't have any issues with item security access tab at all.
I would appreciate any clues.
Regards,
Anna

There should be two icons shown for each item when you put the page in Edit mode - Edit and Actions. Click on the Actions icon and "Access" should be one of the links in the list of actions (like hide, expire, delete, move, etc.)

SCXI Switches not showing up in NI-Switch Soft Front Panel

Hi,
I have an SCXI 1001 chassis containing about a dozen SCXI 1160 switch modules. The first switch module is connected to a PXI-4060 DMM card in a seperate PXI chassis. MAX 4.0 was able to auto-detect the switches, and they show up under the "Devices and Interfaces" folder. However, when I run the NI-Switch Soft Front Panel application, the SCXI switches do not show up as selectable switches. Are there additional properties that need to be configured in order for the Soft Front Panel to detect the SCXI switches? Is there an online manual/guide for doing this?
Thanks in advance for any help.
VRMan

If you have the option of using a DAQmx supported device as the controller for the SCXI chassis, I would recommend changing your SCXI configuration so that your SCXI devices show up in the Soft Front Panel.
If the PXI-4060 (which is not supported under DAQmx) is the only SCXI chassis controller you have, a workaround is to use the Traditional(Old) Soft Front Panel. The Old Soft Front Panel has not been updated with switch modules since NI-SWITCH 2.4 and is not currently supported. But given that you have SCXI-1160s in your chassis, it should work for your use case.
We install the Old Soft Front Panel at Program Files\IVI\Drivers\niSwitch\OldSoftFrontPanel

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Help with Planning Query - 0CALMONTH not showing up

Hi, I have a simple planning query where I am trying to allow users to input or change an Amount by Material/Month. The User inputs a Version and a Date Range to maintain. The selected dates should show up going across the screen even if there is no existing data. These Variables are in the Query Filter along with a few other characteristic Filters. So in my query I have 0MATERIAL in the Rows and I have 0CALMONTH and my Key Figure. Under advanced for the characteristic 0CALMONTH it is set as Master Data.
When I run the query for some reason the 0CALMONTHS do not show up going across. If I run the query and put in one value then the 12 months show up. Seems like a bug. I have another similar query where this works. Can anyone take a look at the screen shots and help me figure this out?
[Query Def Screen 1|http://i35.tinypic.com/1h8con.png]
[Query Def Screen 2|http://i36.tinypic.com/1f781c.png]
[0MATERIAL Def|http://i36.tinypic.com/xefq8i.png]
[0CALMONTH Def|http://i35.tinypic.com/ej8qpv.png]
Thanks!
Edited by: Kenneth Murray on Nov 5, 2009 3:12 PM

Dear Kenneth,
I think its a bug. If we post the value without the drilldown on 0CALMONTh then its open for the input, and after that if we drill down it with 0CALMONTH for same selection, it opens for input. but for new selection of month it not opens.
Have you solved the problem?
Regards,
V B Udani

Managing video storage with iOS8 - video usage not showing

I've typically deleted video (iTunes tv shows) using manage storage/usage from General settings. For some reason video data usage is not showing and I'm not aware of any other means of freeing up space. I'm not able to delete directly from video itself once data has been downloaded. Help!
thanks!
using iPad ios 8
Message was edited by: vmclelland

Hello vmclelland,
Thanks for using Apple Support Communities.
To delete videos from your iPad running iOS 8 please follow the steps below.
Delete a video from iPad. Tap Edit in the upper right of your collection, then tap on the video thumbnail. If you don’t see the Edit button, look for on your video thumbnails—those videos haven’t been downloaded to iPad, so you can’t delete them. To delete an individual episode of a series, tap the series, then swipe left on the episode in the Episodes list.
Deleting a video (other than a rented movie) from iPad doesn’t delete it from the iTunes library on your computer or from your purchased videos in iCloud, and you can sync the video or download it to iPad again later. If you don’t want to sync a deleted video back to iPad, set iTunes to not sync the video. See Sync with iTunes.
Important: If you delete a rented movie from iPad, it’s deleted permanently and cannot be transferred back to your computer.
Add videos to your library
Take care,
Alex H.

With holding tax tab not showing up in MIRO

Hi,
Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
Thanks

Hello Shruti,
Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
And also check on the MRIO screen, have you checked "calculate tax" under general tab.
Hope it will help you
Thanks
Para

ISE Wired 802.1x with Foundry access switch ,not show "Device Port"

Similar Messages

Maybe you are looking for