ISight suddenly not working in iChat

Hi,
My iSight has always worked and i've never had a problem until just now. I just got off a Skype video call with a friend on a PC. my iChat was running and now I realize that it only has the 'phone' icon next to my picture. I checked the preferences and it says:
'There is no camera attached to this computer'
I went on several posts but couldn't find the exact problem.
i checked the system profiler and the in the USB Device Tree my iSight appears.
I then checked in the Console and I got this message:
1/14/11 12:36:19 PM iChat[2617] No iChat delegate set for vccLocalVideoError
I have of course tried restarting iChat. I also deleted com.apple.iChat.playlist and re-signed in to no avail.
Kind of out of ideas now.
Thanks for your help.

bizeulg wrote:
I have the exact same problem. My external iSight which worked well till last week suddenly only shows a phone icon in iChat. In Skype, it tells me there is no Camera as in iChat. The problem remains the same whether I quit or not Skype...
On my MacBook Pro and its internal iSight there is no problem...
Message was edited by: bizeulg
I think that your external iSight problem is different from the inbuilt iSight problem
posted by the OP.
However, if you still believe that your problem is EXACTLY the same as Niklass posts, follow the suggestions Ralph offers to solve that one.
Otherwise,
(1) follow the suggestions here to determine if your external iSight has failed:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(2) If you cannot get your external iSight working with those suggestions, and if you do not have access to a local Apple Service Technician who can repair it, other repair options are shown here:
http://www.apple.com/support/isight/service/
(3) If you need to replace your external iSight, some alternatives are here:
http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Similar Messages

Isight is not working on ichat and skype, however will work on photo booth and imovie.

My isight will not work on ichat or skype, saying that there is no camera connected. isight will work in photo booth and imovie. It shows up in the system profiler. Have tried resetting SMC. Help?

(1) Here is how I would proceed to isolate the underlying problem that requires corrective action.
• Shut down everything.
• Then restart modem and allow its self-test to complete.
• Then restart router or wireless access point (if you have them) and allow self-test to complete.
• Then restart Mac.
• Use  > Software Update... (Update your Apple software if not current.)
• Then test Photo Booth or iMovie with no other apps else running to ensure they still work.
• Then quit your test app and try iChat with no other apps else running.
• If iChat works, quit iChat and try Skype with no other apps else running.
(2) If iChat works but Skype does not,
• Verify that you are using the latest version of Skype that is compatible with your OS X (10.5.8) Mac.
• Update if necessary.
• Then test Skype again with no other apps else running.
• If Skype problems remain but your camera works with everything else, Skype's comprehensive support system should best be able to help you use their product with your system.
Start here: https://support.skype.com/
Or, click this link for help specifically related to Mac video calls.
You can also search or post for help with your problem in Skype's dedicated Skype Discussions for Mac. The Skype users who post there may have already solved the same problem.
If nothing else works, you can even sign in and ask for email help directly from Skype's Technical Support people.
(3) If you still have trouble with more than one app, you may need to use Disk Utility to:
• repair permissions,
• repair your disk,
• or even reinstall Mac OS.
If you reinstall OS X 10.5, use the Mac OS X 10.5.8 Combo Update to return to the latest version in one update step.
Message was edited by: EZ Jim
Mac OSX 10.7.4

(Slow Network): iSight camera not working in iChat since Leopard upgrade

I have a different type of iChat video issue. My Power Mac G4, 867 MHz, 1 GB DRAM is a supported Mac for the Leopard upgrade. I've successfully installed OS 10.5.
Also my Power Mac meets the iChat Conferencing Requirements for 1-on-1 Video Chat per the OS 10.5 system requirements and the application note here:
http://docs.info.apple.com/article.html?artnum=301050
My iSight camera is connected via Firewire to an Apple Cinema Display, which feeds back to the Power Mac G4.
1) When I boot from my 10.3.9 Carbon Copy Cloner backup my iSight works in iChat (at least locally to see myself) without any issue. Green light comes on and shows me locally on video and audio sound bars. Before the OS upgrade the iSight worked fine for live video conferences with iChat 2.1.3 under Mac OS 10.3.9
2) Running OS 10.5 when I go to iChat 4.0's preferences video pane the following message is waiting "This computer does not support video conferencing."
3) With Leopard iChat 4.0 the Connector Doctor under "capabilities" says "(Slow Network)" for 1-on-1 Video Chat and won't even show video locally or turn on the iSight's green light.

Fixed!
My Power Mac Quicksilver G4, 867 MHz. problem with (Slow Network) in the iChat Connection Doctor, no video preview or video iChat since upgrading to OS 10.5 Leopard and iChat 4.0 has been solved with the following posted towards the end of the thread below. I can finally see my video preview with iChat 4.0 and have also video chatted successfully with one other user.
Topic : Macbook - iChat says "This computer does not support video conferencing"
http://discussions.apple.com/thread.jspa?threadID=1197506
Fixed by Apple Article: http://docs.info.apple.com/article.html?artnum=307035
Products affected
Mac OS X 10.5 Leopard
iChat
PowerPC-based Mac with a 867MHz processor
Solution
Quit iChat.
Open Terminal (it's in the Utilities folder, in the Applications folder).
In Terminal type or paste this command on a single line:
defaults write com.apple.iChat newbwdup 300000
Press Return.
Quit Terminal.
Open iChat.

External iSight cam not working with iChat

I've got an external iSight cam that was working fine in 10.5.8 with iChat - I'm using 10.6.1 now. Now when I open iChat, the camera stays off (no green light) and iChat video preview says that another application is using the camera so it's not available, which of course, is not true.
I've tried everything I know, but can't get it to work. The camera works with Skype, so I know it's functioning properly.
When I checked the Connection Doctor, under Network, it says that there's something in my network setup that is preventing video chats, but I haven't changed anything since upgrading to SL. I have a direct ethernet cable to my DSL modem/router - Covad. My wife's iChat works fine with her new LogiTech camera, and she's on the same home network/router.
Message was edited by: Macaroni108

Opps,
My head read that as MacBook Pro. Sorry.
Try Restarting the computer whilst Holding done the Apple (CMD)+ALT (OPTION)PR Keys until you have heard three start up Bongs.
Chax is an iChat Add-on.
Different version have done different things in the different iChat Versions.
There is only a Alpha test version of the one for Snow Leopard.
The iChat 4 version does not work in Snow Leopard/iChat 5 and that was why I was asking.
7:43 PM Monday; September 14, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Isight Camera not working in Ichat, but green light on...

Hi All, the greenlight in my Ichat stays on all the time. And when I log in to use ichat or skype the video peolple on the other end cannot see me, but I can see them.
What can I do?

Well, this is the answer! I just did a hard restart by force quiting it all. You do this by holding down the power button. Thought I better post in case someone else has the same problem.

Isight not working with ichat

I've ran into problems with my built-in isight camera not working with ichat. It says there hasn't been any information sent in the past 10 seconds and shuts down. It works fine on other programs like Yahoo Messenger and Skype though. Anyone know how to fix this?
Thanks

I asked What router/modem do you have make and model.
Not you OS.

ISight in not working in Photo Booth, iChat, and VMWare with Snow Leopard

System Info
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
OS Version 10.6.1
Symptoms
iSight is not working, a blank screen is shown in the following Apps / VM
1. Photo Booth
2. iChat
Visible to VM app, but unable to connect in Windows XP running on VMWare
It is however viewable in Skype preference Video tab
Visible in System Profiler under USB
Following actions taken for troubleshooting
SMC reset - by unplugging all cables over couples minutes, as well as CommandOption+PR key at boot time
Repairing Permission on the Macintosh HD drive, rebooted after and didn't work
Not user account specific, tried different account and the same problem persists

Welcome to Discussions, Stanley Chung
Sorry you are still having problems even after trying the good suggestions from Ralph and Boomer.
I did not see specifically from your posts that your iSight worked before upgrading to Snow Leopard, but I am inferring from your topic's title that it did. If your iMac came with Snow Leopard installed, please post and tell us whether you erased the disk and reinstalled all your iMac's software before you started using it. If you upgraded your iMac to Snow Leopard, consider the following.
(1) Until you get iSight working, do all your testing while no peripherals other than keyboard/mouse are attached to your iMac. To eliminate all possibility of any conflict external to your Mac, be sure you also disconnect any wireless devices (iPod, printer, etc) connected to your system.
(2) If you still have problems with all you have tried, it seems to me that you must have a software issue. You might try uninstalling Skype and VMWare and testing again to see if those installations are causing a conflict.
(3) Check the support sites for all of your third party software to be sure there are no known Snow Leopard issues and that you are using the latest compatible versions.
(4) If the problem still exists and you have not already tried this, reinstall Snow Leopard, repairing permissions immediately before and after the reinstall.
(5) If your problem remains and System Profiler still shows your inbuilt iSight as a USB device, I suggest you backup all important files, erase your disk, reinstall all Apple software, and test to see if iSight works properly. Once it does, you can install any necessary peripherals and third-party apps one-at-a-time, testing after each addition to see if one of them is causing problems.
EZ Jim
MacBook Pro (13 inch, Mid 2009) 2.26GHz w/Mac OS X (10.6.1) G5 DP 1.8GHz w/Mac OS X (10.5.8)
G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) LED Cinema Display External iSight

IChat video suddenly not working

Can anyone help? I'm using iChat 4.0.8 on an almost brand new MacBook Pro. The video worked perfectly fine with my parents, and then suddenly stopped working when we moved. We're still using a wireless connection with an airport extreme. Funny thing is, the video works fine with my husband's MacBook Pro, and my brother who is in California. Why would it suddenly not work with my parents when computers haven't changed?
please help!

Did the Modem change ?
10:49 PM Monday; October 19, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

My Isight is not working on skype and yahoo messenger but works on photobooth and ichat

My Isight is not working on skype and yahoo messenger but works on photobooth and ichat.
Ive reset my SMC and PMU but it still does not work. Only black screen appears on skype with a loading sign that takes so long. The light signal on the cam doesnt turn on as well which indicates that it is really not working.

Regarding Skype, post in the Mac Skype forums on Skype's website. It's where all the Mac Skype users hang out.
Regarding Yahoo, contact its customer tech support department.

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

ISight & Remote not working...

Dear Mac Support Forum,
This is my first post here at the forums although I’ve been browsing them for some time now.
I hit the trifecta of problems so I wasn’t sure where exactly to do this post. Hope you can help.
Latest Updates:
iTunes 7.5
Quick Time 7.3.1
MAC OS X 10.4.11 Update
Issues:
1. I-pod touch is not showing up in iTunes.
2. I-sight is not working (Photo Booth once selected shows the following message “the camera is in use by another application”). No other applications are running.
3. Remote can not open or run Front Row.
• NOTE: all stopped working at the same time after my latest software update so I believe they are related in someway. No 3rd party apps were installed in the mean time.
Tried & unsuccessful solutions:
1. Fully charged the i-pod.
2. Deleted & reinstalled latest version of iTunes.
3. Disconnected & reconnected the i-pod several times using different USB ports to the machine.
4. Restarted the i-pod several times.
5. Restarted the MacBook several times.
6. Reinstalled (Apple Mobile Device Service).
7. Restarted the MacBook in safe mode.
8. Attempted to pair the remote with the MacBook by holding down the Menu and Next/FFWD button.
9. I reset the System Management Controller (SMC) several times.
10. Under System Preference > Security > “Disable remote control infrared receiver" option is unchecked.
11. Deleted & reinstalled the latest version of Quick Time.
12. Tried using the remote with another MacBook & it worked fine.
13. Went to System Preference > Account > Login Item, and uncheck all the applications.
NOTE:
1. Although once connected to another PC the i-pod is immediately recognized by i-tunes.
2. I-pod only charges once connected to the MacBook.
3. The i-pod, IR receiver & i-sight all appear under the USB section of the System Profiler.
4. Front Row can still be run using the keyboard short cuts.
Can you please come up with any suggestion other then the ones tried above to solve these issues.
Thanks for your support.

Welcome to Apple Discussions, hishamonline
Very well done Topic! Thanks for such a good and thorough description.
You have landed in iSight discussions, and I see that you have tried many of the things that users can do to correct iSight problems. It can be very difficult to try to troubleshoot multiple devices simultaneously, so I will first give you my suggestions for your iSight issue. It is possible that something you try for iSight will fix one of your other problems even if it does not fix iSight. To keep the process as simple as possible, whether a given suggestion fixes iSight, one of your other problems, or noting at all, I suggest you continue to concentrate iSight until we get that resolved. Then we will move on to any other remaining issues.
I see that you have done a lot of updating, installing, and uninstalling. You do not say how you accomplished those actions. If you repaired permissions before and after any install, update, or uninstall that require you to input your Administrator Password, and if you used an Apple uninstaller or followed Apple's directions for how to uninstall, the updates/installs/uninstalls should not have caused any problems. If you merely dragged application folders to the trash, you most likely did not uninstall properly. Don't worry about that now, but, for your future consideration, it is generally a bad idea to move, modify, rename, or delete any item outside your User > Documents folder unless you are an experienced OS X user.
Now, onward to get iSight working. If you have not done so since your last software install or update, your first step should be to quit all running applications and then repair permissions. Then try Photo Booth again to see if your iSight works with it now.
If repairing permissions does not help, your next step should be to disconnect everything from your MacBook, restart, and troubleshoot iSight using all suggestions relevant to your system from How to Troubleshoot iSight to determine whether your iSight needs professional service. If, after using the suggestions there, you can make iSight work with any application in any user account you try, you know that your iSight works. Your problem is in some other part of your system.
If your iSight does not work right after trying everything above, post back and tell us:
(1) which, if any, applications work with your iSight
(2) which apps you tried that do not work with your iSight
(3) if EVERY problem is EXACTLY the same in EVERY user account your tried
(4) whether your iPod touch, Photo Booth, and Remote ever worked correctly
(5) if they did, what changed immediately before each problem began, and
(6) if all three problems began at the same time.
We will offer more specific suggestions based on the details in your response.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Help! My MacBook is all of a sudden not working. I can login to my account but as soon as I do that the screen goes completely white. I can change the volume and I have a mouse but that is it. I've tried safe starting my computer and that doesn't work.

Help! My MacBook is all of a sudden not working past the login page. A white screen comes up that I cannot get rid of. I attempted a safe start up and that failed as well. It's a white screen where I have a mouse and when I click the volume buttons I can hear it working but nothing else just white. Please help.

Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

ISight suddenly not working in iChat

Similar Messages

Maybe you are looking for