ISM with NAT44 - Need help with configuration
Hello everyone,
I'm trying to set up NAT44 in the following scenario below and I'm having a hard time figuring out how to redirect the traffic. As you can see the big problem is that I have one single interface that connects to the internal network (10.0.0.0/8) and also to the tunnel destinations all in the same VRF. Can you guys give me a hand? The trafiic comes from network network 10.0.0.0/8 enters interface bundle-ether 2 (Now it needs to be translated), once it is translated, now it needs to reach the destination known via GRE tunnel.
Configurations
vrf NAT_IN
address-family ipv4 unicast
vrf BLUE
address-family ipv4 unicast
hw-module service cgn location 0/3/CPU0
interface Bundle-Ether2
description UPLINK TO METRO ETHERNET
interface Bundle-Ether2.2 l2transport
encapsulation dot1q 2
rewrite ingress tag pop 1 symmetric
interface GigabitEthernet200/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface GigabitEthernet300/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface BVI2
description METRO
vrf BLUE
ipv4 address 100.0.0.10/24
interface tunnel-ip 101
description GRE_TUNNEL
vrf BLUE
ipv4 address 1.1.1.1/32
tunnel mode gre ipv4
tunnel source interface bvi 2
tunnel destination 200.0.0.1
interface BVI 100
vrf BLUE
ipv4 address [GATEWAY_100] [MASK_100]
interface BVI 200
vrf BLUE
ipv4 address [GATEWAY_200] [MASK_200]
interface BVI 300
vrf BLUE
ipv4 address [GATEWAY_300] [MASK_300]
interface ServiceApp1
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
vrf BLUE
ipv4 address 10.0.2.2 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
router static
address-family ipv4 unicast
vrf NAT_IN
address-family ipv4 unicast
0.0.0.0/0 ServiceApp1
10.0.0.0/8 vrf BLUE bvI 2 <NEXT HOP>
vrf BLUE
address-family ipv4 unicast
172.16.0.0/24 ServiceApp2
router ospf METRO
vrf BLUE
router-id [ROUTER_ID]
redistribute bgp 65500 metric 100
area 0
interface bvi 2
router ospf BLUE
vrf BLUE
router-id [ROUTER ID]
redistribute bgp 65500 metric 100
area 10
interface BVI100
interface BVI200
interface BVI200
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf BLUE
rd 65500:2
address-family ipv4 unicast
redistribute static
redistribute ospf BLUE
neighbor 1.1.1.2
remote-as 64512
ebgp-multihop 5
address-family ipv4 unicast
route-policy PASS in
route-policy PASS out
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
map outside-vrf BLUE address-pool 172.16.0.0/24
Thanks in advance,
Renato
Hi Somnath,
Let's see if you can help with this new scenario. I want to extend this NAT configuration to a new site (BO1), but instead of using this entire setup with ASR9K, etc, I just want to use ASR9000v module and have this AS9K + ISM as the host. The first problem I see in this scenario is that I have the same 10.0.0.0/8 network in both sites, network which will access the same resources as the devices in the 10.0.0.0/8 in the main site.
1) Do you think if I create a new inside VRF [NAT_IN1] would address this issue?
2) Can I use the same outside VRF?
Here is the configurations.
!! IOS XR Configuration 4.3.1
vrf NAT_IN
address-family ipv4 unicast
import route-target
65500:2
65500:3
export route-target
65500:3
vrf RED
address-family ipv4 unicast
import route-target
65500:1
export route-target
65500:1
vrf NAT_OUT
address-family ipv4 unicast
import route-target
65500:4
export route-target
65500:4
vrf SATELLITE
vrf BLUE
address-family ipv4 unicast
import route-target
65500:2
export route-target
65500:2
hw-module service cgn location 0/3/CPU0
ipv4 access-list ABF
5 permit ospf any any
10 permit ipv4 any 10.200.0.0 0.0.255.255 nexthop1 vrf NAT_IN ipv4 10.0.2.2
20 permit icmp any any
interface Bundle-Ether3
description Uplink (BE3 - VRF NAT_IN) - VLAN 20
vrf NAT_IN
ipv4 address 1.1.1.1 255.255.255.0
ipv4 access-group ABF ingress
interface Bundle-Ether22
description LOOPBACK CABLE NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.1.1 255.255.255.0
interface Bundle-Ether23
description LOOPBACK CABLE BLUE
vrf BLUE
ipv4 address 10.0.1.2 255.255.255.0
interface 6
description Uplink (BE6 - Global) - VLAN 20,51,80-82
interface 6.2
ipv4 address 1.1.1.2 255.255.255.0
encapsulation dot1q 2
interface 6.51 l2transport
description EFP - BE6 - VLAN 51
encapsulation dot1q 51
rewrite ingress tag pop 1 symmetric
interface 6.80 l2transport
description EFP - BE6 - VLAN 80
encapsulation dot1q 80
rewrite ingress tag pop 1 symmetric
interface 6.81 l2transport
description EFP - BE6 - VLAN 81
encapsulation dot1q 81
rewrite ingress tag pop 1 symmetric
interface 6.82 l2transport
description EFP - BE6 - VLAN 82
encapsulation dot1q 82
rewrite ingress tag pop 1 symmetric
interface Bundle-Ether100
description Bundle to Satellite 100
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 100
remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether200
description Bundle to Satellite 200
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 200
remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether300
description Bundle to Satellite 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
remote-ports GigabitEthernet 0/0/0-35
interface Loopback0
description MGMT SATELLITE
vrf SATELLITE
ipv4 address 10.0.0.254 255.255.255.0
interface tunnel-ip31101
description BLUE-TUNNEL01
vrf BLUE
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31102
description BLUE-TUNNEL02
vrf BLUE
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface tunnel-ip31103
description RED-TUNNEL03
vrf RED
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31104
description RED-TUNNEL04
vrf RED
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface TenGigE0/0/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/4
description LINK TO SATELLITE 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
remote-ports GigabitEthernet 0/0/36-43
interface TenGigE0/0/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/0/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/1/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/0/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/1/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/0/0/22
description LOOPBACK CABLE TE0/1/0/22
bundle id 22 mode on
interface TenGigE0/0/0/23
description LOOPBACK CABLE TE0/1/0/23
bundle id 22 mode on
interface TenGigE0/1/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/4
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/22
description LOOPBACK CABLE TE0/0/0/22
bundle id 23 mode on
interface TenGigE0/1/0/23
description LOOPBACK CABLE TE0/0/0/23
bundle id 23 mode on
interface BVI30
vrf RED
ipv4 address 10.200.25.193 255.255.255.192
interface BVI31
vrf BLUE
ipv4 address 10.200.1.1 255.255.255.248
interface BVI32
vrf BLUE
ipv4 address 10.200.25.129 255.255.255.224
interface BVI33
vrf BLUE
ipv4 address 10.200.25.1 255.255.255.128
interface BVI36
vrf BLUE
ipv4 address 10.200.237.145 255.255.255.240
interface BVI51
vrf RED
ipv4 address 192.168.7.12 255.255.255.0
interface BVI80
vrf RED
ipv4 address 10.200.26.169 255.255.255.224
interface BVI81
vrf BLUE
ipv4 address 10.200.25.164 255.255.255.240
interface BVI82
vrf BLUE
ipv4 address 10.200.25.180 255.255.255.240
interface ServiceApp1
description NAT_IN
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
description NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.2.5 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
description ISM
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
prefix-set PS_ROUTES
10.200.0.8,
10.200.5.40/29,
10.200.1.0/29,
10.200.5.32/29,
10.200.0.144/28,
10.200.106.0/28,
10.200.106.16/28
end-set
prefix-set PS_BGP_BLUE_OUT
10.200.24.192/26,
10.200.5.40/29,
10.200.240.0/25,
10.200.1.0/29,
10.200.25.128/27,
10.200.25.0/25,
10.200.5.32/29,
10.200.26.0/25,
10.200.0.144/28,
10.200.27.128/27,
10.200.27.0/25,
10.200.106.0/28,
10.200.106.128/25,
10.200.106.16/28,
10.200.107.128/25
end-set
route-policy RP_DENY_ALL
drop
end-policy
route-policy RP_PASS_ALL
pass
end-policy
route-policy RP_BGP_BLUE_OUT
if destination in PS_BGP_BLUE_OUT then
pass
endif
end-policy
route-policy RP_PASS_ROUTES
if destination in PS_ROUTES then
pass
endif
end-policy
router static
address-family ipv4 unicast
0.0.0.0/0 1.1.1.20
vrf NAT_IN
address-family ipv4 unicast
0.0.0.0/0 ServiceApp1
vrf RED
vrf NAT_OUT
address-family ipv4 unicast
0.0.0.0/0 10.0.1.2
10.200.24.192/26 ServiceApp2
vrf BLUE
address-family ipv4 unicast
10.200.24.192/26 10.0.1.1
router ospf
log adjacency changes
vrf NAT_IN
router-id 1.1.1.1
disable-dn-bit-check
redistribute bgp 65500 metric 5 metric-type 2 route-policy RP_PASS_ROUTES
area 7
interface Bundle-Ether3
router ospf RED
log adjacency changes
vrf RED
router-id 10.200.26.169
disable-dn-bit-check
redistribute bgp 65500 metric 10 metric-type 2
area 11
interface BVI30
interface BVI80
router ospf BLUE
log adjacency changes
vrf BLUE
router-id 10.200.25.164
disable-dn-bit-check
redistribute static
redistribute bgp 65500 metric 10 metric-type 2
area 0
interface BVI81
interface BVI82
area 2
interface BVI31
interface BVI32
interface BVI33
interface BVI36
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf NAT_IN
rd 65500:3
bgp router-id 1.1.1.1
address-family ipv4 unicast
route-target download
vrf RED
rd 65500:1
bgp router-id 10.200.253.90
address-family ipv4 unicast
network 10.200.25.192/26
network 10.200.26.128/27
network 10.200.26.192/27
network 10.200.27.192/26
network 10.200.104.128/27
network 10.200.104.160/27
neighbor 10.200.253.89
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31103
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_PASS_ALL out
soft-reconfiguration inbound
neighbor 10.200.253.93
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31104
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_PASS_ALL out
soft-reconfiguration inbound
vrf BLUE
rd 65500:2
bgp router-id 10.200.253.90
address-family ipv4 unicast
network 10.200.0.144/28
network 10.200.1.0/29
network 10.200.5.32/29
network 10.200.5.40/29
network 10.200.24.192/26
network 10.200.25.0/25
network 10.200.25.128/27
network 10.200.26.0/25
network 10.200.27.0/25
network 10.200.27.128/27
network 10.200.106.0/28
network 10.200.106.16/28
network 10.200.106.128/25
network 10.200.107.128/25
network 10.200.240.0/25
neighbor 10.200.253.89
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31101
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_BGP_BLUE_OUT out
soft-reconfiguration inbound
neighbor 10.200.253.93
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31102
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_BGP_BLUE_OUT out
soft-reconfiguration inbound
l2vpn
load-balancing flow src-dst-ip
bridge group VLAN30
bridge-domain VLAN30
routed interface BVI30
bridge group VLAN31
bridge-domain VLAN31
routed interface BVI31
bridge group VLAN32
bridge-domain VLAN32
routed interface BVI32
bridge group VLAN33
bridge-domain VLAN33
routed interface BVI33
bridge group VLAN36
bridge-domain VLAN36
routed interface BVI36
bridge group VLAN51
bridge-domain VLAN51
routed interface BVI51
bridge group VLAN80
bridge-domain VLAN80
interface 6.80
routed interface BVI80
bridge group VLAN81
bridge-domain VLAN81
interface 6.81
routed interface BVI81
bridge group VLAN82
bridge-domain VLAN82
interface 6.82
routed interface BVI82
nv
satellite 100
type asr9000v
ipv4 address 10.0.0.1
satellite 200
type asr9000v
ipv4 address 10.0.0.2
satellite 300
type asr9000v
ipv4 address 10.0.0.3
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
map outside-vrf NAT_OUT address-pool 10.200.24.192/26
Thanks in advance,
Renato
Similar Messages
-
Need help with iPhoto, Need help with iPhoto
Hey there!!!
When I plug in my iPhone I go to iPhoto and can choose to import the pictures. I also tried Image Capture as it seemed easier to organise my pictures, making folders, sub-folders, etc. The problem with this is everytime I plug my iPhone into the computer click on Import the system automatically makes second, third, fourth, etc copies of each picture. This also means that there is a copy of my pictures on iPhoto and on Image Capture - which I do not really need.
I have tried to make Albums and Folders on iPhoto. Sometimes when I delete a picture as it has been saved in two albums it gets deleted from both albums. Why is this? How can I make Albums or Folders to organise my pictures. If my pictures are transferred directly onto iPhoto, can I find them anywhere else in my computer? If I wanted to burn pictures from various albums on a disc how could I do that on iPhoto? Also I dont want events to create themselves. How can I avoid this?
I would like help with either using iPhoto or know how the stop the duplicating of pictures on Image Capture.
Maybe there is a better way I can transfer the pictures onto my MacBook??
Thanks a mil!!!Are you running a "referenced" or "managed' library?
Image Capture does not store phortos in it. It's an application for uploading photos to wherever you tell it to, either a folder on the hard drive or into iPhoto. If you want to use only Image Capture to upload your photos to iPhoto then set iPhoto's General preferences to the following:
Deleting Photos from an iPhoto Library:
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurances of that photo in the library.
OT -
ISM with NAT64 - need help with config
Hello,
we are trying to configure NAT64 on ISM. We are running 4.3.0 on ASR9k and all
packages are installed.
Problem is that the config guide is "incomplete" and the NAT64 config is not well
explained.
I will paste the config and show command output..
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh cgn nat64 stateful CGN1 statistics
Tue Jan 29 14:52:59.351 BIH
Unable to obtain requested info Error:'cgn' detected the 'warning' condition 'The instance has not yet been configured'
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh cgn nat64 stateful STATEFULL statistics
Tue Jan 29 14:59:07.270 BIH
Unable to obtain requested info Error:'cgn' detected the 'warning' condition 'CONN state is DOWN'
service cgn CGN1
service-location preferred-active 0/4/CPU0
service-type nat64 stateful STATEFULL
portlimit 2000
ipv6-prefix 64:ff9b::/64
ipv4 address-pool 80.65.84.160/29
dynamic-port-range start 10000
address-family ipv4
interface ServiceApp2
tcp mss 600
address-family ipv6
interface ServiceApp1
protocol icmp
reset-mtu
tcp mss 600
protocol udp
timeout 1800
protocol tcp
session initial timeout 90
session active timeout 90
protocol icmp
timeout 900
interface ServiceInfra10
ipv4 address 10.100.127.9 255.255.255.252
service-location 0/4/CPU0
Interface serviceAPP1 is present but not serviceApp2
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh run inter ServiceApp1
Tue Jan 29 22:40:43.814 BIH
interface ServiceApp1
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh run inter ServiceApp2
Tue Jan 29 22:41:34.601 BIH
% No such configuration item(s)
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#show platform
Tue Jan 29 14:57:29.753 BIH
Node Type State Config State
0/RSP0/CPU0 A9K-RSP440-TR(Standby) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP440-TR(Active) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 A9K-8T-L IOS XR RUN PWR,NSHUT,MON
0/1/CPU0 A9K-8T-L IOS XR RUN PWR,NSHUT,MON
0/2/CPU0 A9K-2T20GE-L IOS XR RUN PWR,NSHUT,MON
0/3/CPU0 A9K-2T20GE-L IOS XR RUN PWR,NSHUT,MON
0/4/CPU0 A9K-ISM-100(LCP) IOS XR RUN PWR,NSHUT,MON
0/4/CPU1 A9K-ISM-100(SE) APP-READY
Package asr9k-ism-cgv6-install-kit-4.3.0.00.sh has been installed!
Node 0/RSP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/asr9k-os-mbi-4.3.0/0x100305/mbiasr9k-rsp3.vm
Active Packages:
disk0:asr9k-fpd-px-4.3.0
disk0:asr9k-mpls-px-4.3.0
disk0:asr9k-optic-px-4.3.0
disk0:asr9k-doc-px-4.3.0
disk0:asr9k-mini-px-4.3.0
disk0:asr9k-mcast-px-4.3.0
disk0:asr9k-mgbl-px-4.3.0
disk0:asr9k-services-p-px-4.3.0
disk0:asr9k-k9sec-px-4.3.0
Node 0/4/CPU0 [LC] [SDR: Owner]
Boot Device: mem:
Boot Image: /disk0/asr9k-os-mbi-4.3.0/lc/mbiasr9k-lc.vm
Active Packages:
disk0:asr9k-mpls-px-4.3.0
disk0:asr9k-optic-px-4.3.0
disk0:asr9k-mini-px-4.3.0
disk0:asr9k-mcast-px-4.3.0
disk0:asr9k-services-p-px-4.3.0
Service-Engine0/4/0/0 unassigned Up Up
Service-Mgmt0/4/0/0 unassigned Up Up
Service-Engine0/4/0/1 unassigned Up Up
Service-Mgmt0/4/0/1 unassigned Up Up
Service-Engine0/4/0/2 unassigned Up Up
Service-Mgmt0/4/0/2 unassigned Up Up
Service-Engine0/4/0/3 unassigned Up Up
Service-Mgmt0/4/0/3 unassigned Up UpHi,
first thank your for reply.
hw-module service cgn location 0/4/CPU0 has been typed in the config but I can not see it anywhere in the config after I enter and commit it.
This is the guide I am using. You will see that the NAT64 example is incomplete or is lacking of some explainations. You will see mistakes like an IP address 300.x.x.x . I even tried to completly copy/paste the example in the guide and it still shows the same errors!
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.3/cg_nat/configuration/guide/cgnat_43.html
Edit:
After serviceapp 1 and 2 has been configured the error "Unable to obtain requested info Error:'cgn' detected the 'warning' condition 'CONN state is DOWN'
" has gone
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh run interface serviceapp1
Wed Jan 30 08:44:59.602 BIH
interface ServiceApp1
vrf Internet
ipv6 address 1::1/64
service cgn CGN1 service-type nat64 stateful
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh run interface serviceapp2
Wed Jan 30 08:45:00.950 BIH
interface ServiceApp2
vrf Internet
ipv4 address 1.1.1.1 255.255.255.252
service cgn CGN1 service-type nat64 stateful
RP/0/RSP1/CPU0:ASR9010_PE_DMALTA#sh cgn nat64 stateful STATEFULL statistics
Wed Jan 30 08:46:50.342 BIH
Statistics summary of NAT64 Stateful instance: 'STATEFULL'
Number of active translations : 0
Number of static translations : 0
Number of dynamic translations : 0
Number of Sessions : 0
Translations create rate : 0
Translations delete rate : 0
Inside to outside forward rate : 0
Outside to inside forward rate : 0
Inside to outside drops port limit exceeded : 0
Inside to outside drops system limit reached : 0
Inside to outside drops resource depletion : 0
No translation entry drops : 3134
Filtering Drops : 0
Invalid Ipv6 Prefix Drops : 0
Number of subscribers : 0
Drops due to session db limit exceeded : 0
Pool address totally free : 8
Pool address used : 0
For what are the IP addresses in serviceapp used, only for communication between router and ISM? -
NEED HELP WITH WORKFLOW CONFIGURATION
I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
1) Description:
This is a workflow requirement to serve as a reminder of upcoming investment
maturities.
Requirements Details:
Create a workflow to serve as a reminder of upcoming investment maturities.
Donor System Processing Narrative:
Read the maturity dates on investments.
Target System Processing Narrative:
Send a notice to the parties that an investment will be maturing soon.
2) Description:
Implement workflow to route invoice receipts using a one time vendor for management
review and posting
Desired Functionality:
If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
parked by the program and a workflow notification triggered to the Accounting
Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
the parked document and imaged copy of the actual invoice and post the parked
document.
3) Description:
An approval workflow is needed for credit memos posted to SAP customer accounts.
Desired Functionality:
The Cash Journal Clerk will post a credit memo to the customer account using transaction
FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
the Accounting Manager for approval and then to the CFO who will approve and post the
parked document. (In order for this transaction to automatically trigger what configuration needs to be done).Bob;
You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments -
I need help with Mavericks Server: an error occurred while configuring your server. I
I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.
There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.
-
Need help with AS8 configuration
Our present situation is like this:
AS7 with single domain and multiple server instances
instance A running on port xxx containing app1
instance B running on port yyy containing app2
instance C running on port zzz containing app3
Now, when I move to AS8.1 PE, I dont see the option to create a server instance inside a domain. I need to create 3 domains in order to accomplish the same task as above. Not only that, now I need to login to 3 different admin servers to manage the 3 apps on 3 ports
I need help with some options I can use
thanksI'm not sure but i think that on 8.1 pe you can have only one server instance by default...
But you can olso try by command line tool asadminin [installdir soas]/binuse:
asadmin --help for a list of commands available.
In the list should be create-instance to create a stand alone instance.
Hi
Stefano -
I need help with my EtreCheck report
Hi All -
Thanks for taking the time -
I NEED HELP WITH MY EtreCheck report
Problem description:
running slow
EtreCheck version: 2.1.8 (121)
Report generated February 19, 2015 at 3:18:49 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 130
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:12:52
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (362.64 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) [Click for support]
[not loaded] com.sony.protocol.prodisc (2.3.0) [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
User Launch Agents: ℹ️
[failed] [email protected] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.jdibackup.ZipCloud.autostart.plist [Click for support] [Click for details]
[loaded] com.jdibackup.ZipCloud.notify.plist [Click for support]
User Login Items: ℹ️
RED Watchdog Application (/Applications/REDCINE-X Professional/Utilities/RED Watchdog.app)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
iTunesHelper UNKNOWN Hidden (missing value)
QmasterStatusMenu Application (/Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app)
SpyderUtility Application (/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app)
Spyder3Utility Application (/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 8.1.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Growl [Click for support]
REDcode [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% mds
5% WindowServer
0% Google Drive
0% Google Chrome
0% fontd
Top Processes by Memory: ℹ️
172 MB Google Chrome
155 MB mds_stores
155 MB Mail
103 MB Google Chrome Helper
94 MB Google Drive
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.72 GB Active RAM
451 MB Inactive RAM
895 MB Wired RAM
1.30 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 19, 2015, 03:03:40 PM Self test - passedWhy Put it off I say ... Here you go Linc
Start time: 12:05:29 02/20/15
Revision: 1250
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 2:42
UID: 504
I/O wait time (ms/s)
kernel_task (UID 0): 39
Font issues: 263
Trust settings: admin 4, user 4
TCP/IP
Subnet mask: 255.255.252.0
Listeners
cupsd: ipp
nfsd: 1023
rpc.lockd: 1017
rpc.rquotad: garcon
rpc.statd: exp1
rpcbind: sunrpc
System caches/logs
3319 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-02 Mail crash
2015-02-04 Spyder3Utility crash
2015-02-20 Acrobat hang x3
2015-02-20 Final Cut Pro crash x2
HID errors: 22
Kernel log
Feb 20 10:20:53 Google Chrome He (map: 0xffffff801e1b7c30) triggered DYLD shared region unnest for map: 0xffffff801e1b7c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:31:10 ARPT: 3921.321063: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth request tx failed
Feb 20 10:41:10 Google Chrome He (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:14 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:30 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a960) triggered DYLD shared region unnest for map: 0xffffff802b72a960, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a3c0) triggered DYLD shared region unnest for map: 0xffffff802b72a3c0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff8023819f00) triggered DYLD shared region unnest for map: 0xffffff8023819f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff802cdb0e10) triggered DYLD shared region unnest for map: 0xffffff802cdb0e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8022da2e10) triggered DYLD shared region unnest for map: 0xffffff8022da2e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8023819b40) triggered DYLD shared region unnest for map: 0xffffff8023819b40, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 11:49:11 Google Chrome (map: 0xffffff802b72a2d0) triggered DYLD shared region unnest for map: 0xffffff802b72a2d0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb0780) triggered DYLD shared region unnest for map: 0xffffff802cdb0780, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63e10) triggered DYLD shared region unnest for map: 0xffffff8022a63e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63c30) triggered DYLD shared region unnest for map: 0xffffff8022a63c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb05a0) triggered DYLD shared region unnest for map: 0xffffff802cdb05a0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63f00) triggered DYLD shared region unnest for map: 0xffffff8022a63f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63690) triggered DYLD shared region unnest for map: 0xffffff8022a63690, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 12:08:01 ARPT: 8890.600067: MacAuthEvent en1 Auth result for: 00:19:92:35:7d:e1 Auth request tx failed
Feb 20 12:08:01 ARPT: 8890.950534: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth timed out
System log
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:25:05 airportd: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:49 WindowServer: WSBindSurface Invalid surface 723885656 for window 1311
Feb 20 11:29:13 fseventsd: event logs in /Volumes/WDA_1T/.fseventsd out of sync with volume. destroying old logs. (461 2 59825)
Feb 20 11:29:13 fseventsd: log dir: /Volumes/WDA_1T/.fseventsd getting new uuid: UUID
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasKeyAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasMainAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:41:24 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[1532]
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 12:01:17 WindowServer: WSGetSurfaceInWindow Invalid surface 710322265 for window 1327
Feb 20 12:04:39 fseventsd: implementation_removed_client: did not find client 0x7f9eec210660 for path = '/.docid'
Feb 20 12:11:28 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[2262]
Console log
Feb 15 12:07:08 ReportCrash: Invoking spindump for pid=644 wakeups_rate=158 duration=285 because of excessive wakeups
Feb 15 12:55:36 ReportCrash: Invoking spindump for pid=754 wakeups_rate=200 duration=225 because of excessive wakeups
Feb 15 13:59:55 ReportCrash: Invoking spindump for pid=913 wakeups_rate=186 duration=242 because of excessive wakeups
Feb 15 16:54:59 ReportCrash: Invoking spindump for pid=964 wakeups_rate=188 duration=240 because of excessive wakeups
Feb 16 10:35:10 ReportCrash: Invoking spindump for pid=1059 wakeups_rate=337 duration=134 because of excessive wakeups
Feb 16 10:51:21 ReportCrash: Invoking spindump for pid=1080 wakeups_rate=161 duration=280 because of excessive wakeups
Feb 16 11:59:13 ReportCrash: Invoking spindump for pid=1168 wakeups_rate=243 duration=186 because of excessive wakeups
Feb 16 12:02:57 ReportCrash: Invoking spindump for pid=1175 wakeups_rate=382 duration=118 because of excessive wakeups
Feb 16 13:07:53 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.ic.searchinstaller/Cache.db is NOT valid. Unable to determine schema version.
Feb 16 13:07:53 nsurlstoraged: ERROR: unable to determine file-system usage for FS-backed cache at /Users/USER/Library/Caches/com.ic.searchinstaller/fsCachedData. Errno=13
Feb 16 13:22:31 ReportCrash: Invoking spindump for pid=2237 wakeups_rate=326 duration=139 because of excessive wakeups
Feb 16 14:17:37 ReportCrash: Invoking spindump for pid=2420 wakeups_rate=228 duration=198 because of excessive wakeups
Feb 16 14:33:29 ReportCrash: Invoking spindump for pid=2438 wakeups_rate=240 duration=188 because of excessive wakeups
Feb 16 14:46:36 ReportCrash: Invoking spindump for pid=2454 wakeups_rate=305 duration=148 because of excessive wakeups
Feb 17 12:58:26 ReportCrash: Invoking spindump for pid=2894 wakeups_rate=689 duration=66 because of excessive wakeups
Feb 17 13:13:41 ReportCrash: Invoking spindump for pid=2914 wakeups_rate=487 duration=93 because of excessive wakeups
Feb 17 16:54:57 ReportCrash: Invoking spindump for pid=1965 wakeups_rate=162 duration=278 because of excessive wakeups
Feb 18 13:50:58 ReportCrash: Invoking spindump for pid=3869 wakeups_rate=160 duration=282 because of excessive wakeups
Feb 19 08:17:10 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 14:59:30 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:04:57 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:18:06 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
Feb 19 16:50:23 ReportCrash: Invoking spindump for pid=3308 wakeups_rate=189 duration=239 because of excessive wakeups
Feb 20 09:24:49 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Daemons
com.adobe.fpsaud
com.adobe.versioncueCS3
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
com.apple.watchdogd
Agents
[email protected]
- status: 78
com.apple.Finder
- status: -15
com.google.keystone.user.agent
com.jdibackup.ZipCloud.autostart
- status: 1
com.jdibackup.ZipCloud.notify
- status: 1
User login items
RED Watchdog
- /Applications/REDCINE-X Professional/Utilities/RED Watchdog.app
GrowlHelperApp
- /Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app
GrowlHelperApp
- /Users/USER/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelp erApp.app
iTunesHelper
- missing value
QmasterStatusMenu
- /Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app
SpyderUtility
- /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
Spyder3Utility
- /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
Google Drive
- /Applications/Google Drive.app
Google Chrome
- /Applications/Google Chrome.app
Firefox extensions
Live PageRank
Web Developer
Exif Viewer
iCloud errors
bird 418
cloudd 65
Continuity errors
sharingd 21
Restricted files: 335
Lockfiles: 48
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist
- mod date: Oct 20 14:05:00 2009
- checksum: 714202969
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS3</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS3</string>
<key>UserName</key>
<string>root</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
- mod date: Dec 21 11:32:33 2012
- checksum: 1980407752
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ambrosiasw.ambrosiaaudiosupporthelper.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/AmbrosiaAudioSupport.kext/Contents/MacOS/amb rosiaaudiosupporthelper</string>
</array>
<key>KeepAlive</key>
<false/>
<key>Disabled</key>
<false/>
<key>LaunchEvents</key>
<dict>
<key>com.apple.iokit.matching</key>
<dict>
<key>AmbrosiaAudioSupport</key>
<dict>
<key>IOMatchLaunchStream</key>
<true/>
<key>IOProviderClass</key>
<string>com_AmbrosiaSW_AudioSupport</string>
</dict>
...and 4 more line(s)
Contents of /Library/LaunchDaemons/com.apple.qmaster.qmasterd.plist
- mod date: Aug 25 21:24:23 2010
- checksum: 681742547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.qmaster.qmasterd</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/qmasterd</string>
</array>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /private/etc/hosts
- mod date: Sep 20 11:46:00 2013
- checksum: 1921340845
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of Library/LaunchAgents/[email protected]
- mod date: Sep 15 12:18:45 2009
- checksum: 2526625188
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>[email protected]</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>LowPriorityIO</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
<string>-l</string>
<string>/Users/USER/Library/Logs/[email protected]</string>
<string>-u</string>
<string>@me.com</string>
<string>-t</string>
<string>SharedServices</string>
<string>-s</string>
</array>
...and 4 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Nov 28 13:56:29 2014
- checksum: 3826001454
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 2356528749
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.autostart</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>-n</string>
<string>--args</string>
<string>9</string>
<string>-l</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.notify.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 1841511774
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.notify</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>--args</string>
<string>7</string>
<string>1</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>StartInterval</key>
<integer>1200</integer>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Extensions
/System/Library/Extensions/AmbrosiaAudioSupport.kext
- com.AmbrosiaSW.AudioSupport
/System/Library/Extensions/FAMProtocol.kext
- com.sony.protocol.prodisc
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/prodisc_fs.kext
- com.sony.filesystem.prodisc_fs
Applications
/Applications/Adobe Acrobat 8 Professional/Acrobat Distiller.app
- com.adobe.distiller
/Applications/Adobe Acrobat 8 Professional/Acrobat Uninstaller.app
- com.adobe.Acrobat.Uninstaller
/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app
- com.adobe.Acrobat.Pro
/Applications/Adobe Bridge CS3/Bridge CS3.app
- com.adobe.bridge2
/Applications/Adobe Device Central CS3/Device Central.app
- com.adobe.devicecentral.application
/Applications/Adobe Dreamweaver CS3/Dreamweaver.app
- com.adobe.dreamweaver-9.0
/Applications/Adobe Extension Manager/Extension Manager.app
- com.adobe.ExtensionManager
/Applications/Adobe Fireworks CS3/Adobe Fireworks CS3.app
- com.macromedia.fireworks
/Applications/Adobe Flash CS3 Video Encoder/Adobe Flash CS3 Video Encoder.app
- com.macromedia.FLVEncoder
/Applications/Adobe Flash CS3/Adobe Flash CS3.app
- com.adobe.flash-9.0-en_us
/Applications/Adobe Flash CS3/Players/Debug/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Debug/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Flash CS3/Players/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Help Viewer 1.0.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Help Viewer 1.1.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Illustrator CS3/Adobe Illustrator.app
- com.adobe.illustrator
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
- N/A
/Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
- com.adobe.Photoshop
/Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3.app
- com.adobe.AdobePremierePro
/Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
- com.adobe.stockphotos-1.5
/Applications/Audacity/Audacity.app
- net.sourceforge.audacity
/Applications/Beak.app
- com.flyosity.beak
/Applications/Buzzbird.app
- org.buzzbird.buzzbird
/Applications/Celtx.app
- ca.greyfirst.celtx
/Applications/Datacolor/Spyder3Elite/Spyder3Elite.app
- com.datacolor.spyder3elite
/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
- com.datacolor.spyder3utility
/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
- com.datacolor.spyderutility
/Applications/Disk Inventory X.app
- com.derlien.DiskInventoryX
/Applications/Epson Software/Print CD/Print CD.app
- jp.co.epson.PrintCD2
/Applications/FileZilla.app
- de.filezilla
/Applications/FlashVideo Converter.app
- com.geovid.
/Applications/Gorilla Folder/Gorilla Program 4.0.0/Gorilla 4.0.0
- N/A
/Applications/HandBrake.app
- org.m0k.handbrake
/Applications/Levelator.app
- org.conversationsnetwork.levelator
/Applications/OpenOffice.org.app
- org.openoffice.script
/Applications/RecBoot.app
- com.lepidu.RecBoot
/Applications/Smultron.app
- org.smultron.Smultron
/Applications/TouchCopy.app
- N/A
/Applications/Uninstall MM Scheduling/Uninstall MM Scheduling.app
- N/A
/Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
- "com.Adobe.ESD.AdobeUpdaterApplication"
/Applications/Utilities/Adobe Utilities.localized/ExtendScript Toolkit 2/ExtendScript Toolkit 2.app
- com.adobe.estoolkit-2.0
/Applications/Utilities/Bluetooth Firmware Update.app
- com.apple.updaters.btfirmwareupdate201
/Applications/Utilities/FAM Driver Tool.app
- com.sony.famdrivertool
/Applications/VLC.app
- org.videolan.vlc
/Applications/XDCAM Transfer.app
- com.sony.bprl.xdcamtransfer
/Applications/YouSendIt Desktop App.app
- com.yousendit.YouSendIt
/Applications/YouSendIt.app
- com.yousendit.YouSendItExpress
/Applications/gedit.app
- org.gnome.gedit
/Applications/iWork '08/Keynote.app
- com.apple.iWork.Keynote
/Applications/iWork '08/Numbers.app
- com.apple.iWork.Numbers
/Applications/iWork '08/Pages.app
- com.apple.iWork.Pages
/Developer/Applications/Utilities/MacPython 2.5/Build Applet.app
- org.python.buildapplet
/Developer/Applications/Utilities/Python 2.6/Build Applet.app
- org.python.buildapplet
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileAddressBook.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Game Center.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Camera.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/DataActivation.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Library/Application Support/Adobe/Adobe Asset Services CS3/AssetServicesCS3.app
- com.adobe.assetServicesCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3.app
- com.adobe.versioncueCS3.VersionCueCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app
- com.adobe.versioncueCS3.VCStatusMenu
/Library/Application Support/Adobe/Installers/UUID/Setup.app
- com.adobe.Installers.Redirector
/Library/Application Support/Adobe/Installers/R1/Setup.app
- com.adobe.Installers.Setup
/Library/Application Support/Intuit/QuickBooks/2007/JHandShake.app
- com.intuit.JHandShake
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
- com.microsoft.silverlight.sllauncher
/Library/Application Support/ProApps/MIO/RAD/Plugins/ReadMe(Image Handling Library).app
- jp.co.canon.DocumentLauncher
/Library/Application Support/iWork '08/iWork Tour.app
- com.apple.iWorkTour
/Library/Documentation/User Guides And Information.localized/Apple Hardware Test Read Me.app
- com.apple.AppleHardwareTestReadMe
/Library/Printers/EPSON/InkjetPrinter/AutoSetupTool/EPIJAutoSetupTool.app
- com.epson.ijprinter.EPIJAutoSetupTool
/Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app
- com.epson.ijprinter.rastertoescp
/Library/Printers/EPSON/InkjetPrinter/Utilities/EPSON Printer Utility3.app
- com.epson.ijprinter.Utility3
/Library/Printers/hp/Fax/fax.backend
- com.hp.fax
/Library/Printers/hp/Fax/rastertofax.filter
- com.hp.rastertofax
/Library/Printers/hp/cups/filters/pdftopdf.filter
- com.hp.print.cups.filter.pdftopdf
/Users/USER/Documents/iPhone Apps/Archivers/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/Archivers_test/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/DateCell/build/Debug-iphonesimulator/DateCell.app
- N/A
/Users/USER/Documents/iPhone Apps/EasyCustomTable/build/Debug-iphonesimulator/EasyCustomTable.app
- N/A
/Users/USER/Documents/iPhone Apps/Grids/build/Debug-iphonesimulator/Grids.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphonesimulator/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug/Metalsmith Suite.app
- com.yourcompany.Metalsmith-Suite
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Distrobution-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Scrolling/build/Debug-iphonesimulator/Scrolling.app
- N/A
/Users/USER/Documents/iPhone Apps/UICatalog/build/Debug-iphonesimulator/UICatalog.app
- N/A
/Users/USER/Documents/iPhone Apps/WebViewTutorial/build/Debug-iphonesimulator/WebViewTutorial.app
- N/A
/Users/USER/Documents/iPhone Apps/XML/build/Debug-iphonesimulator/XML.app
- N/A
/Users/USER/Documents/sites/nvrslp.com/dev/the_lab/ns_resize
- N/A
/Users/USER/Documents/sites/zoomify/Zoomifyer EZ v3.1/Zoomifyer EZ.app
- N/A
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Default apdfllckaahabafndbhieahigkjlhalf.app
- com.google.Chrome.app.Default-apdfllckaahabafndbhieahigkjlhalf-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
- com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpebaehgfgkcmmjjknibibbjacnplim/Default blpebaehgfgkcmmjjknibibbjacnplim.app
- com.google.Chrome.app.Default-blpebaehgfgkcmmjjknibibbjacnplim-internal
/Users/USER/Library/Application Support/iPhone Simulator/3.1.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/WebViewTutorial.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Archivers.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/AnimatedGifExample.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/4.2/Applications/UUID/Spinspiration.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/XML.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/DateCell.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Scrolling.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Autoscroll.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Grids.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/TapToZoom.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/EasyCustomTable.app
- N/A
/Users/USER/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/octoshape/octoshape
- N/A
Frameworks
/Library/Frameworks/REDCODE.Color.framework
- com.red.redcode.color
/Users/USER/Library/Frameworks/EWSMac-GC.framework
- com.eSellerate.EWSMac67108872
PrefPane
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/REDcode.prefPane
- com.red.prefpanel
/Library/PreferencePanes/VersionCueCS3.prefPane
- com.adobe.versioncueCS3.VCPrefPane
/Users/USER/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
Bundles
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ASEFormat.plugin
- com.adobe.aseformat
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/BMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Cineon.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/EPS Parser.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/GIF.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/JPEG2000.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/OpenEXR.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PBM.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PCX.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PNG.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Pixar.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Radiance.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Targa.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/WBMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/altiveccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/dicom.plugin
- com.adobe.dicom
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/mmxcore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/multiprocessor support.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ppccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Required/Photoshop Adapter.plugin
- null
/Library/Application Support/Adobe/Flash Player/Flash Player.plugin
- com.macromedia.Flash Player.plugin
/Library/Application Support/Adobe/Plug-Ins/CS3/File Formats/Camera Raw.plugin
- com.adobe.CameraRaw
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/Versions/2.0/Resources/PlugIns/CFXmlParser.plugin
- com.hp.dmf.plugins.CFXmlParser
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/ -
Need help with Berkeley XML DB Performance
We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
XmlIndexSpecification spec = container.getIndexSpecification();
// ids
spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// index to cover AttributeValue/Description
spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
// cover AttributeValue/@value
spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// item attribute values
spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// default index
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// save the spec to the container
XmlUpdateContext uc = xmlManager.createUpdateContext();
container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig -
Need help with almost completed plugin engine project
Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces. -
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Good Morning SAP Gurus-
I need help with an request. My client wishes to create a new Payment term with the following:
Due date should fall on the 1st day of the month after the due period of 60 days end of month. So for example; an invoice with document date of March 8th should have a due date of June 1st 2012.
How would I configure that in OBB8?OBB8
Base line date as "Document dat"
Fixed day 01
Additional months 2
try this,
thanks -
I need help with my mapping - CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV
hi, guys, i need help with my mapping, i dont know this error (i not speak english)
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Object-Id:4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="1" type="T">Mapping-SWCV:88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Step:1 </Trace>
<Trace level="1" type="T">Mapping-Type:JAVA_JDK </Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_mm_sgipi_fi001_vta_clientes_ </Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="3" type="T">Executing multi-mapping </Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
help me pleaseyou can use the sharedobject to record a user/computer has taken your quiz, the session data and record their results. at the start of your quiz, check for the sharedobject and, if it exists, check the other data and take appropriate action.
-
Need help with reviewing in acrobat professional 8.0
Hi,
I need help with reviewing in adobe acrobat professional 8.0 for windows.
When I click in Edit->Preferences->Reviewing I choose Network folder and in browse button I select the network folder.
It´s ok, but when I restart the computer, the configuration of reviewing dissapear.
Any sugestion for solve this problem?The closest I came was:
// Custom calculation script
(function () {
// Get the field values, as strings
var s1 = getField("Charged").valueAsString;
var s2 = getField("Reduction").valueAsString;
// Perform the calculation if both fields are not blank
// and Charged is not zero
if (s1 && s2 && +s1 !== 0) {
event.value = 100 * (+s1 - +s2) / +s1;
} else {
event.value = "";
which I got from another thread. It works, but the result tends to have a - before the number. Also when I use the formatting in acrobat and select percentage the decimal placement gets confusing. I'm creating this form for a bunch of morons in my HR department so extraneous numbers makes them confused. I need the most simplified result possible. -
Need help with the Magic Trackpad
I really need help with my Magic Trackpad. I just got it in the mail yesterday and when I was trying to set it up, it's not responding to the "one click." In the TrackPad Settings, I managed to turn off the Secondary Click and just have the Single Click checkbox turned on. How I managed that was double clicking on the bottom right side of the trackpad, but that's if I'm lucky enough for that even to respond. I have also tried to turn off my Mac and turning it back on with the trackpad on hoping it would just turn on the default settings. This is really starting to get frustrated and I know the Magic Trackpad is really cool on fun to use because I used it plenty of times I the Apple Store. Now I do know that all the motion gestures work, the only problem I'm having is the clicking mechanism.
The clicking mechanism is located in the lower left or right corner of the trackpad, for single-click select, or secondary (menu) select, respectively. You can also configure single finger tap to select or double-finger tap for the alternate menu selection. Watch the trackpad preference videos by clicking on each setting text.
Here are my System Preference settings for the Magic Trackpad.
Point & Click
Everything checked but three finger drag.
Secondary click configured to click or tap with two fingers.
Scroll & Zoom
Everything checked
More Gestures
Everything checked but App Exposé -
Need help with error: XML parser failed: Error An exception occurred! Type:......
<p>Need help with the following error.....what does it mean....</p><p>28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1<br /><font color="#ff0000">28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at</font><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>.<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.</p><p>Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.</p><p>-m<br /></p>
please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.
Maybe you are looking for
-
Can I use multiple sa-ns500 on the same network?
Is it possible to use multiple sa-ns500 speakers on the same network? they seem to want to have the same name on the network and therefore only 1 will connect at a time? Can I rename one somehow? Thanks!
-
Any way of restoring iTunes selections from iPhone back to hard drive?
First, I have been in a series of PC-like disasters ever since I installed Leopard at Christmas--to the point where I've actually given up any hope of getting my data back--and I can only blame this on synching problems between my iPhone, Mac Mini, a
-
I Need to have many internet windows open at once
I'm used to PC based work where I can have several internet windows open at once. I can't seem to do this on the iMac. I have downloaded Firefox, so I can use Firefox and Safari at the same time, but I would like to have at least 6 internet windows o
-
Where is the link to register your iPhone if you're a developer?
I can't find it and need it to active my phone using iOS 7. I am a developer and have downloaded the Beta version and am trying to install.
-
HI experts, I have alrady learn sap ABAP with BW/BI . NOW i am trying to get a job but i want to know one thing,can BO knowledge make a advantage for that for current market situation. plz guide me about the career. Regards, skmohanty.