ISP,INTERNET,SERVER failed on macbook air 2013 13'

hi,i have problem connecting to wi fi with new macbook air 2013 13' 2 days old,network bars showing that im connected all the time,but i cant surf the web,deley btw having and not having connection is about 20-30minutes sometimes is 10 minutes,i tried to reset router several times and its the same,my internet and cable provider is sending 2.4ghz internet,the model of router is
huawei HG532E and i have cable and internet with two devices, router and cable box they are connected each other its a adsl connection.
macbook air comes with mountaine lion 10.8.4 installed i updated to 10.8.5 but i have same problems with both versions of software.
so i run diagnostics and im almost always have first 3 icons green and always (when there is no connection) i have other 3 icons red and failed
ISP
INTERNET
SERVER
and asistent tells me that i need to check my router and access points,all other devices in my home works normaly with the same router.
i know that new macbook air 2103 comes with new 802.11ac Wi-Fi and as far as i know its a 5ghz i read someone have same problem with the same macbook air but different router,and he is assuming that new wi fi AC is not backward compatibile with the older or regular routers,i dont know if this is true but can someone try to help me to solve this problem,maybe i need to change settings in mac?

in the manual i linked up on resent post you can see how to acces the router.
it says
Step 1
Launch a browser on your computer. Enter http://192.168.1.1 in the address box, and press Enter.
Step 2
On the login page, enter your user name and password.
 By default, both the user name and password are user.
 For security reasons or to make the user name and password easy to remember, you can change them. For details, see section 4.1 "Changing the User Name and Password for the Web-Based Configuration Utility".
Step 3
Click Login.
After verification, the web-based configuration utility is displayed.
The first time you log in to the web-based configuration utility, a configuration wizard is displayed. To skip the wizard and further configure your HG532e, click Here when the following message displays: Click Here to enter the advanced configuration page.
and go to advanced configuration page and se WiFi settings, check transfer mode/protocol 802.11 if it is on b/g b/g/n
you can try to set it to 802.11g only and change channel to 11 or 9
Yes you need to do that on your mac when your connected to the network, then you will get an Advance view option over WiFi.

Similar Messages

Macbook ISP, Internet, Server Fail

My macbook pro has been having difficulties with wifi for some time now. When connected on wifi I frequently get the red ISP, Internet, and Server fails. I've noticed this only happens from my room and if I get closer to the router it's fine. But I used to be able to use it far from my router before, and my iPhone and iPad connect flawlessly where ever I am. On the odd chance that I do have a connection the speeds are usually pretty slow. Could this be a problem with my mac?

Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
          PHY Mode
          Channel
          Security
          Signal/Noise or RSSI
          Transmit (or Tx) Rate
Please do not post the BSSID, as that information is private.
Now hold down the option key again and select
           ▹ System Information... ▹ Network ▹ Wi-Fi
Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified.

Shows Full Signal -- Isp, Internet, Server failing

So I'm attempting to figure out why my macbook won't connect to my friends wireless router. It shows that I have full signal strength and that I'm connected, but still the internet fails. I've tried network diagnostics, and it shows green for Airport and Airport Settings and then Orange for Network settings, and Red for ISP, Internet and Server.
I tried fiddling around with the IP address but nothing seems to be working on that front.
The only thing I've found that makes this router an anomaly for my system is the fact that it uses a WEP password. All other routers I've used have been WPA, though I'm not sure what the difference is and whether it would even make a difference.
Any suggestions would be helpful, thanks!

My new MacBook had exactly the same symptoms. I tried adjusting every setting, and even replaced my Linksys router with an Airport Extreme, but the problems persisted. I just exchanged that MacBook for a new one (same model), and have not experienced any connection problems--yet.
I suspect, but cannot prove, this may be a hardware issue.
There are several other threads on related WiFi problems that might be helpful to you.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Can not open app store on macbook air 2013

I just bought a 2nd Macbook Air 2013 using OS X 10.9.2 (13C64), but don:t know why I can't open the App Store on my macbook without any notifications when I click on the icon. Anyone can let me know what's the problem and what should I do now? Thank you very much!

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

My macbook air 2013 will not find any wireless printers

My macbook air 2013 with OS X 10.9.3 will not find any wireless printers. I've tried to add printers at a number of different locations and each time it fails to find any printers despite one's being online and fully functional. I am able to print from my iPhone on these networks to the wireless printers but my macbook air won't find any at all? The macbook air is online using the wifi network no problem - just won't find any printers, please help.

You can download and run the free application Bonjour Browser. It will show whether the printer is detectable on the network. The printer should show up in one or more of the following categories:
Internet Printing Protocol
Print Spooler
Printer PDL Data Stream
Remote I/O USB Printer

Macbook Air 2013

I just got myself a new Macbook Air 2013 and while I realized I couldn't expect the smoothest experience, I never expected this much hassle with it. So many differnet issues. No need to have a sad face about it, though - let's get together and figure out how to make this work! At least we only have one graphics chip to worry about this time around
This is going to be a pretty long post but I figured it's good to have it all in one place. Please correct me if you think this is the wrong way to post these things.
Installing and booting
Booting from a normal 2013.6 USB key works fine, but I couldn't seem to get either GRUB or Syslinux working.
I was able to boot by first installing Arch Linux following the Macbook guide at the wiki (having a separate FAT32 /boot partition). Skip the bootloader installation.
Installing rEFInd from OS X (important!) and installing the EFI stub loader made me able to boot fine.
Separate thread.
Stability problems
This is the big worry for me. Every now and then my system hangs for a brief moment and everything involving net or disk access just hangs there for a while and then it seems to work.
So far it only seems to happen when I run something disk- or CPU-intensive. Also had an occassion when I couldn't start X and just got this repeating all over my screen:
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:f0:10:8c:c2/00:00:0b:00:00/40 tag 30 ncq 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
On the next attempt it worked fine.
I did SMART short and long tests on my disk and they returned fine:
smartctl -a
There are some messages in my boot that indicate this could be disk and/or ACPI related.
journalctl -b
dmesg
This was on a boot when my NIC was renamed from eth0 to wlp3s0 as noted under Wifi - this should hopefully not be a big deal to fix. Will update when I look more into it.
uname -a:
Linux temperance 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64 GNU/Linux
WiFi
WiFi does not work out of the box. Installing wireless-bcm43142-dkms from AUR made me able to connect to my network. I haven't been able to get it stable yet -interface name changes randomly between wlp3s0 and eth0 between reboots and I get disconnected from my network every 30 minutes or so. Disconnects seem to correlate somewhat with the freezes mentioned above.
Separate thread.
Touchpad
Have only been able to get it to work like a one-button mouse using evdev for now. Looks like an upstream bug.
Separate thread
Audio
In order to get audio, I need to put the following in /etc/asound.conf:
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1
I'm no ALSA pro, but I can only seem to get output from the headphone jack so far - no speakers yet.
Last edited by Legogris (2013-06-27 20:21:11)

While I'm using Ubuntu and not Arch, I wanted to chip in with my experiences.
First, I am happy to tell you that I've found a fix for the ata errors/freezes (which for me were so bad I could hardly install) -- at least I think it's the same or related. I got udevd spitting errors about blkid timing out, and it couldn't find the disks. I found this in a Ubuntu forum -- sadly, I can't find the url now. Anyway, Pass
libata.force=1:noncq
to the linux kernel parameters (in Ubuntu you can add this to /etc/default/grub). This disables NCQ, which according to that post wasn't needed.
YMMV and I am not certain that it doesn't have bad side effects, but for me it made the laptop usable.
Other findings:
My Fn key, and thus delete, page up/down, media keys etc didn't work. That's because the keyboard has a new device id which isn't in usbhid. I added entries like the existing apple keyboards with the new device id (05ac:0291) and after recompiling, it works. I'm pretty sure this is fixable by passing the correct "quirks" flags to the usbhid module, e.g. "quirks=0x05ac:0x0291:0x00001248", but I'm not sure which flags should be set (I have an ISO keyboard layout which is yet another flag).
My sound card doesn't work. Or; i hear no sound at least ;-). After checking in alsamixer, it had two cards, one HDMI with S/PDIF only and one with analog in/out and digital in. I tried passing "index=1" to snd_hda_intel, which makes alsamixer pick up the right card by default. I'm not sure if the problem is that pulseaudio still has the wrong card, or something else.
My wifi works after installing bcmwl from Saucy (i.e. the upcoming Ubuntu 13.10 release), which was a relief because I feared this not being supported.
Sometimes after resuming from suspend, the screen is totally dark -- barely discernible in bright daylight. First I figured this was an issue with lightum (a daemon which monitors the lighting and adjusts keyboard and screen brightness), but after checking /sys/devices/pci0000\:00/0000\:00\:02.0/backlight/acpi_video0/brightness it turns out that when this happens, only the brightness levels 13, 14, and 15 (which is the brightest) have any brighness at all. 12 and under means no backlight. The only "fix" I've found so far is rebooting, which sucks. I hope this will get fixed (I will report a bug on Launchpad next time it happens).
Somewhere I picked up that passing
i915.i915_enable_rc6=1
to the linux parameters enables some great power saving features in the GPU. From modinfo:
i915_enable_rc6:Enable power-saving render C-state 6. Different stages can be selected via bitmask values (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. default: -1 (use per-chip default) (int)
Oh, and if anybody knows how I get my GNU/Linux partition to show up in the Mac boot screen I would be grateful! Right now I have refit installed, which works but I would rather just use the built-in boot manager, which works on the predecessor (MBA 3,2).

How do I install Adobe Shockwave Player on the new Macbook Air 2013

I have just purchased the new Macbook Air 2013 I was trying to install the Adobe Shockwave Flashplayer. Now it dowloads but the problem is that when I go try to play the game it still says I am missing a plug-in. I have been trying to switch it to open Safari using Rosetta I read that if i changed it to that it would work but the option isnt even there for my computer. Please help is it even possible to download

Plug-ins need to be enabled in a new Mac.
    Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow all other plug-ins
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

How can I get Windows Internet explorer on my MacBook air?

I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.

Or install Parallels 7 and then you can run IE just like any other app from within OS X itself. That costs around $50 plus the Windows license though.
Personally I have created an IE9 RDP (remote) App on my terminal server at work and just run that. Looks like it is running on my Mac natively.

Imac suddenly dropping ISP/INTERNET/SERVER all the time

Since adding a new Macbook Pro to my home setup my iMac continually drops ISP/INTERNET/SERVER once its connected. All other devices are absolutely fine and connected to BT Home Hub with BT Infinity. When I perform Network Diagnostics it tells NETWORK CHANGE DETECTED - I click OK and its fine for 30 seconds then drops out again. The WIFI light is always green and I've tried 2 other computes and iPhone in the same location and they are fine too. I have also tried resetting the Home Hub but this doesn't help.
I can't help thinking its a device problem rather than a BT problem but wanted to check here first before calling them.
All help much appreciated - as I said this has only just started happening and the only difference to the setup is that I've added a new laptop into the setup.
Thanks
S

Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
And are there usually full bars?

Cannot make or receive calls from macbook air 2013

i installed OSX Yosemite 2 days ago but i cant figure how to make or receive calls from my computer.
everytime it gives an error "your phone and computer must be in the same wi-fi connection" which they already are.
i tried log out and log in again for icloud also re-installing yosemite but no luck.
any help would be appreciated
Thanks
Macbook Air 2013 (Yosemite)
Iphone 5 (IOS 8.0.2)

There are many reports like yours. Apparently there are bugs yet to be worked out in Handoff. Make sure you've taken all the steps directed in the support article linked below. If you have, restart the phone and try again. Failing that, you can either contact Apple Support, go to a "Genius Bar," or wait for an update to iOS and/or OS X.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Is anyone having trouble with internet on the new macbook air and an old modem?

Is anyone having trouble with internet on the new macbook air using an old modem?
I live in NYC and have an old modem/router and keep getting kicked off the internet. I have time warner as my internet provider.

Hello there adell723,
I suggest taking a look at this article we have named Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
If you have Mac OS X 10.8.4 Mountain Lion installed then I would recommend using Wireless Diagnostics tool which is on your computer already.
Here is the article for it and how to use it to assist with wifi connectivity issues.
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Sterling

My Macbook Air 2013 battery life is sub 4 hours. How do I diagnose and resolve the issue?

Hi,
I have a 6 month old Macbook AIr 2013 and I am getting sub 4 hours of battery life against the 12 hrs advertised. I looked into the application monitor and found that Spotlight has been causing my battery to drain
Here is a brief snapshot of System information
Hardware Overview:
Model Name:          MacBook Air
Model Identifier:          MacBookAir6,2
Processor Name:          Intel Core i5
Processor Speed:          1.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBA61.0099.B07
SMC Version (system):          2.13f7
Battery Information:
Model Information:
Serial Number:          D86349701E7F90KAV
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          511
Hardware Revision:          000a
Cell Revision:          1200
Charge Information:
Charge Remaining (mAh):          6362
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          7023
Health Information:
Cycle Count:          16
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1727
Voltage (mV):          8266
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          1
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
DarkWakeBackgroundTasks:          1
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          10800
Standby Enabled:          1
Battery Power:
System Sleep Timer (Minutes):          1
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
Current Power Source:          Yes
DarkWakeBackgroundTasks:          0
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          10800
Standby Enabled:          1
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Can somebody please advise me on what exactly is wrong and what I need to do to resolve the issue. Much appreciate the help.
Thanks
Nitin

1. Follow these instructions, or these for OS X 10.9 or later.
2. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
3. You can also try resetting the SMC.
4. Make sure your system is up to date in Software Update.
5. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Why can't I update bootcamp software on my Macbook Air 2013?

I'm running windows 8 on my 13" macbook air 2013. Apple sent me a notification of updated bootcamp support software and directions for installation. This web page included a list of the models that are supported by this software and mine is one of them. When I began installing this support software an error message said my computer model isn't supported. I called apple care and they told me it isn't their responsibility to supply windows drivers for people running bootcamp. This sounds fishy and completely wrong. Can someone help, please?

Can you go back and post the web page and actual details (drivers, versions, etc)?
Are you trying to update in Windows and from the Apple Software Update application? manually downloading in Windows? you can use either.
Yes, very fishy. Use to be even worse I think with just how well they are ready to answer and help with Windows on Mac topic.
Use to be the old support pages were to me easy to see and find updates and tech support articles but you can still try there for both your Mac, firmware and model specific, and for Boot Camp.
Also when Mac OS X gets updated, often you download new drivers from within Boot Camp Assistant, too, a 3rd method.
Wasn't clear which method was used.
http://www.apple.com/support/macbookair
http://www.apple.com/support/bootcamp
http://support.apple.com/downloads/

ISP,INTERNET,SERVER failed on macbook air 2013 13'

Similar Messages

Maybe you are looking for