Issue after applying Cumulative update on SharePoint 2010 Server

Hi All,
We got an issue after applying the "SharePoint Server 2010 and Project Server 2010 Cumulative Update Server Hotfix Package (MOSS server-package,
Project server-package): June 28, 2011" on SharePoint 2010 server.
Environment details:
OS: Windows server 2008 R2 with SP1
TFS: TFS 2010 with SP1
DB: SQL Server 2008 R2
SharePoint: SharePoint 2010 with SP1
Due to this issue we are not able to proceed further to integrate PS 2010 with TFS 2010. Can someone please suggest solution for this issue.
Thanks,
Rajukumar

Hi Rajukumar,
At the very first, please refer to the article below for installing CU on Project 2010 server:
http://technet.microsoft.com/en-us/library/dd239177(v=office.14).aspx#Installation_steps
I found a blog for this issue:
http://blogs.msdn.com/b/brismith/archive/2011/07/06/project-server-2010-sp1-and-june-2011-cu-formatexception-when-trying-to-provision-a-pwa-site.aspx
In addition, I'd recommend you install latest update for your server.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

Exhange 2013 not working after trying to apply cumulative update 6

Hi All,
Please can you help. Its been over a week since I tried to apply cumulative update 6 on my instance of Exchange 2013 and I am getting nowhere with it. With any user intervention it came up with errors in the middle of applying the update. I can't continue
the installation nor can I roll it back. Most of all it has rendered the server useless.
When I run the update I get the following error;
$connectors=Get-ReceiveConnector - Server $RoleFQDNorName;
foreach($connector in connectors){if($connector.MaxLocalHopCount - gt 1){Set-ReceiveConnector -identity$connector.identity -MaxlocalHopCount 5}};
"Was run: "Microsoft.Exchange.Data.DataValidationException:You must provide a value for this property.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception,ErrotCategory category,Object target,Boolean reThrow,String helpUrl)............................
Please could you help?
Thanks,
Dominic

I recommend that you open support ticket with Microsoft.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Product installation failed July 8, 2014 Cumulative Update for SharePoint Server 2010

HI
when i apply cumulative update ubersrv2010-kb2883005-fullfile-x64-glb
its showing the message , product installation failed
i already installed service pack 2
adil

adil

Do I need to install Security Hotfix (KB2977319) after Cumulative Update 12 for SQL Server 2008 R2 SP2

HI,
I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
Overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:31:21
End time:                      2014-09-06 10:55:49
Requested action:              Patch
Instance SPNTSQLTRN overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:48:08
End time:                      2014-09-06 10:55:45
Requested action:              Patch
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       2
KBArticle:                     KB2977319
KBArticleHyperlink:            http://support.microsoft.com/?kbid=2977319
PatchType:                     QFE
AssociatedHotfixBuild:         0
Platform:                      x64
PatchLevel:                    10.52.4321.0
ProductVersion:                10.52.4000.0
GDRReservedRange:              10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
PackageName:                   SQLServer2008-KB2977319-x64.exe
Installation location:         e:\ac2af22d88ee645b5b32b5c178\x64\setup\
Please inform if I need to apply the hotfix on CU12. Thanks in advance.
John S

Yes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Cannot download cumulative update for Office 2010 December 2014

I tried to download the cumulative update for Office 2010 (December 2014) at the following link:
https://technet.microsoft.com/library/dn789213(v=office.14)
When you click the link (http://support.microsoft.com/kb/KB3020815) you get to an "oops" page.
Oops!
The page you are looking for may have a new location, or is no longer available.
Does anyone have a link that works for that update?
Thanks,
--Jeffrey

Hi Protholl,
I visited the link you provided:http://support.microsoft.com/kb/KB3020815 , got the same result "Oops! The page you are looking for may have a new location, or is no longer available."
Please visit this link instead:
http://support.microsoft.com/kb/3020815
You should open the page with no issue then.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Installed Sharepoint 2010 Server SP2 Update; PSConfig succeeds but CA still shows "Upgrade Available"

I have installed SharePoint 2010 Server SP2. Central Administration shows the configuration database is at 14.0.7015.1000. I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc. But
I got those cleaned up and finally got PSConfig to complete.
However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have.
When I run stsadm.exe -o localupgradestatus it shows me the following:
[2] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[23] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
The 12 objects that cannot be upgraded are ancillary databases like:
StateService_[GUID]
Secure_Store_Service_DB_[GUID]
PerformancePoint Service Application_[GUID]
They all show "Cannot Upgrade" for the status.
Am I correct in thinking these are what's keeping the status at Upgrade Available? And if so how can I resolve?
If not, what else can be done to change that Upgrade Available status?
My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
Thank you.

use psconfig via command line:
> PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

After applying Security Update 2006-001 can't launch Office X apps

I noticed that, after applying Security Update 2006-001, I can't launch Microsoft Word nor Excel nor Power Point (Office X, 10.1.6 updated). If I double click the app icon, select and try to open from File menu or try to launch it from the Dock, I get the message "The app has unexpectedly quit". This does not affect Entourage so far. I can open existing files double clicking on their icons and, once the app is running, create new files from menu bar. Repaired permissions, checked for corrupted preferences files or templates but to no avail.
Can anybody help?
iBook G4 Mac OS X (10.3.9) 512 MB RAM

DivX Doctor is a freeware I had downloaded a few days before applying Security Update 2006-01 (http://www.macupdate.com/info.php/id/4683). It certainly was responsible for my problems with Office X apps because, as I said, they completely disappeared as soon as I got rid of it.
I hadn't the memory problems you mentioned (I've applied also Security update 2006-02 without problems).
Don't know if this can help, but you might want to give a try to Disk inventory X (http://www.macupdate.com/info.php/id/14393) [quote]Disk Inventory X is a disk usage utility for Mac OS X. It shows the sizes of files and folders in a special graphical way called "treemaps".
If you've ever wondered were all your disk space has gone, Disk Inventory X will help you to answer this question.[/quote]
Once DiskWarrior fixed a problem with free hard disk space on my machine, even though a small one.
iBook G4

Will Cumulative Update 12 for SQL Server 2008R2 SP2 fix: Warning: Unable to Verify TimeStamp for Path\ProgramName?

Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -

The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected]

Cumulative update 15 for SQL Server 2012 SP1 is released

Cumulative update 15 for SQL Server 2012 SP1 is released
http://support.microsoft.com/en-us/kb/3038001
MDS related fix is:
FIX: Add three stored procedures to clean up history that is created when you use SQL Server 2012 MDS
http://support.microsoft.com/en-us/kb/3036601
After using MDS for a while, the transaction/validation/staging history may grow very large. In this CU we provide 3 store procedure to clean them up manually.
The fix will be ported over to SQL 2012 SP2 and SQL 2014 CUs in the coming 2 months.
In next SQL Server release, it will be automated by MDS maintenance job.
--@ModelID is the model ID that you clean up the log for.
--@CLeanupOlderThanDate is the date before that the logs or records is deleted.
DECLARE @CleanupOlderThanDate date = '<Date>', @ModelID INT = <ID>
--Cleanup Transaction History
EXEC mdm.udpTransactionsCleanup @ModelID, @CleanupOlderThanDate;
--Cleanup Validation History
EXEC mdm.udpValidationsCleanup @ModelID, @CleanupOlderThanDate;
--Cleanup entity-based staging table
EXEC mdm.udpEntityStagingBatchTableCleanup @ModelID, @CleanupOlderThanDate;

Hi SelvaOnline,
I would recommend to install SP2 and the hotfix that came after it.
If you don't have a reason to install a CU than don't bother with it.
SP2:
http://www.microsoft.com/en-us/download/details.aspx?id=43340
Hotfix for SP2;
http://support.microsoft.com/kb/2969896/en-us
Thanks,
Teun

Cumulative Update 1 for SQL Server 2014

Microsoft has released Cumulative Update #1 for SQL Server 2014. Relevant for @@VERSION 12.0.2000 through 12.0.2341
http://support.microsoft.com/kb/2931693/en
[Personal Site] [Blog] [Facebook]

Shanky, I did not want to write clearly in the forum, what I think if there are dozens of fixes at bug's level like fails, error messages, crashes, etc.., about three weeks after the release of the production version. but I wrote about it few words
at facebook Israeli SQL Server User Group. In short.. It's realy look bad in my opinion.
[Personal Site] [Blog] [Facebook]

Cumulative Update 5 for Exchange Server 2013 (KB2936880)

Hi,
i have installed exchange server 2013 on separate servers, I deployed the Mailbox role on the first server, and the CAS role on the second server.
I checked the edition using the exchange management shell on the mailbox server and on the CAS server:
>>>
[PS] C:\Windows\system32>Get-ExchangeServer | fl name,edition,admindisplayversion
Name : EXMBX
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)
Name : EXCAS
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)
<<<
My question is, is it possible to update this current edition to the "Cumulative update 5 for Exchange Server 2013 (KB293688) ?
if it is, in my case, on which servers should i install this update ? on the Mailbox server ? or on the CAS server ?
i appreciate you fast response,
Thanks.

Hello,
It doesn't matter which build you choose: you should first update the mailbox role and then CAS. The best option is to have same version of all your Exchange servers (e.g. CU5).
It is not necessary to install Exchange binaries on DC.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

What needs to be done to rebuild a current Sharepoint 2010 Server farm to work as a Sharepoint 2013 Server farm?

Hello Community
    Currently I have a Sharepoint 2010 Server farm.
    One server contains the database and DNS server
because it is the the domain controller.
    The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
    Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
    I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
    The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
    Thank you
    Shabeaut

There is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Cumulative update 5 for SQL Server 2012 SP2 is released

Cumulative update 5 for SQL Server 2012 SP2 is released
https://support.microsoft.com/en-us/kb/3037255
MDS related fix is:
FIX: The notification email link is broken when a special character is part of the URL in SQL Server 2012 MDS
http://support.microsoft.com/en-us/kb/3036201

Hello,
The following blog shows the latest builds (updates) available for each version of SQL Server.
http://sqlserverbuilds.blogspot.com/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Able to connect the visual studio 2010 to Remote SharePoint 2010 server?

Able to connect the visual studio 2010 to Remote SharePoint 2010 server?
l
I researched the result value is null,
They asking to try in another method like
SharePoint Redistributable,
SharePoint SDK.
Any possible ways to connect the remote SharePoint2010 server with the local system.

hi,
try to see these links :
http://platinumdogs.me/2014/01/14/remote-sharepoint-site-connections-not-supported-using-visual-studio-2013-and-host-named-site-collections/
http://blogs.msdn.com/b/kvosters/archive/2013/03/27/sharepoint-2013-cannot-connect-to-the-targeted-site.aspx
if you try these and they didn't work so you can't :(
HOPE IT HELPS

EML files sitting in queue folder on SharePoint 2010 server

Okay, so the incoming email is actually making it to the SharePoint 2010 server. I actually sent 4 emails from my outlook to the sharepoint site library email. the emails are inside of the queue folder on the sharepoint server. Why would
this be? and tje emails all satrt off with NTFS_...

Hello,
Same here as well. all mails were going to sitting in queue folder prefixed with NTFS_.
Then I did a telnet {FQDN} 25
helo {server FQDN}
mail from:{your email address}
rcpt to:{email address of email enabled library}
give 250 success code if everything looks great.
In my case it gave me
501 5.5.4
then checked the SMTP Server Domain , was different then changed to correct one it worked fine.
Regards
Yogesh
YOGESHA H P(MCTS)

Issue after applying Cumulative update on SharePoint 2010 Server

Similar Messages

Maybe you are looking for