Issue for Direct PDFExport

hi Experts,
I am using wcc11.1.1.7, I have an issue on Direct PDFExport as the following:
1.I configured outgoing provider from UCM server, enabled inboundrefinerysupport from UCM server, enabled PDFexportconverter from IRB server.
2. After restart UCM and IBR, the "IBR Provider Status" under ucm console->administration->refinery admin shows good status, the status is loaded for ibr->admin console->admin->system audit info->InboundRefinery
Issue is why "Direct PDFExport" is not listed in as accept conversion in IBR(ibr admin console->conversion settings->conversion list)? when I checkin a word which is supposed to be converted to pdf format, There is a message in conversion job status showed "No valid provider found for conversion." always.
Best regards

hi,
I did this: RefineryJobExpirationTime=86400 for both of the following files:
$domain\ucm\cs\bin\intradoc.cfg
$domain\ucm\ibr\bin\intradoc.cfg
UCM and IBR server have been restarted, but I have the same issue.
Best regards

Similar Messages

Direct PDFExport is not listed as accept conversion in IBR

hi Experts,
I am using wcc11.1.1.7, I have an issue on Direct PDFExport as the following:
1.I configured outgoing provider from UCM server, enabled inboundrefinerysupport from UCM server, enabled PDFexportconverter from IRB server.
2. After restart UCM and IBR, the "IBR Provider Status" under ucm console->administration->refinery admin shows good status, the status is loaded for ibr->admin console->admin->system audit info->InboundRefinery
Issue is why "Direct PDFExport" is not listed in as accept conversion in IBR(ibr admin console->conversion settings->conversion list)? when I checkin a word which is supposed to be converted to pdf format, There is a message in conversion job status showed "No valid provider found for conversion." always.
Best regards

Wonder why this topic can't be seen in recent content page?

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Business Partner Creation Issue-For object BU_PARTNER

Hi CRM Experts,
Need a help immediately.
Currently am working on CRM 5.2.
In SAP UI when I am creating a BP Type Organisation or Person system allows me to create But when i do the same in WEB UI i am having problem.
In Web UI when i am selecting New Account and creating New Corporate Account or Individual Account with Grouping and Role i am getting an error message as " For object BU_PARTNER , number range interval AB does not exist"
Message no. NR 751
Diagnosis
For object BUPARTNER , number range interval AB does not exist
Message no. NR 751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
I have already assigned number range interval because of which i could create and save BP in SAP UI where as am facing this problem in creating BP only in Web UI.
Do i need to do anything in SNRO? Please explain clearly what should be done to resolve this issue?
Let me remind you again that i could create and save BP in SAP UI without any issue.
Do i need to make setting for the message"settings are only in client 000"
Regds...Arup

Hi Pankaj,
Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
Active Synchroniztion Options
Set BP role Category for customer Integration
Define BP Role for direction customer to BP
Field Assignment for customer Integration
Thanks
Veman.

Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Dispatch Instructions for Direct Supply from Vendor to Customer.

Dear Experts,
Our Company is Project Industry. We have implmented SAP ECC 6.0 in 2008 with SD, FI, MM, PP, QM, PS, DMS modules.
In our case 70% Deliveries to customer are from direct dispatch from our vendor to Client. Steps are as follows.
1. Buyer issues PO to vendor for direct dispatch to customer. After readiness of material vendor gives Inspection call to Buyer.
2. Buyer creates inspection notification using T-code QM01.
3. Quality department visit the vendors place, inspect the material & clears the inspection notification.
4. After acceptance of material, Project Execution issues Dispatch instructions to vendor with PO No. & Item details. This is Outside SAP in MS word.
5. Vendor Supplies the material to Customer based on dispatch instructions.l
6. After receipt of dispatch document from vendor, Buyer creates Goods Receipt w.r.t. Purchase order in MIGO. We have Put ABAP check for GR creation to check Accepted Quantity of Inspection notification of that PO line item.
Now our Management wants to Implement above Step No. 4 of creation of dispatch instructions in SAP. At the time of creation dispatch instructions, system shall check if inspection notification is created & allow the creation for accepted PO line item quantity in the notification & only after the inspection notification is closed in SAP . Dispatch instructions should have information such as PO No., Line item no., Material Code, Material Description & quantity to be dispatch, Vendor Name, Project Name.
As per my knowledge in Standard SAP Dispatch Instructions Process is not there.
Request you to give your valuable opinion.

dispatch instructions can be put into a long text at header or item level, just depends if they are item specific or apply to all items of the PO.
if you do this after the initial PO creation, then this is a PO change and you can print the PO changes as an extra message and send to your vendor.
checking if inspection notification is created has to be made via user exit.

PO Error in Transfer for Direct Procurment

Hi All,
we are running SRM 550 and are at SP15.
We need to get SRM to order Direct Materials for a storage location in our ECC system.
So far all the config has been done, materials transferred, storage locations defined in Org structure extended attributes.
Problem is when I create a PO from a SC for direct materials I get an Error in Transfer and the error in RZ20 says that the account assignment is not valid for the ECC PO doc type.
This all used to work in 2008 when we went live wih SRM but direct procurment was switched off because the business did not need it.
In PPB_PD for the PO there is no account assignment data so I think this is where I have a problem.
I must be missing some small piece of config somewhere that provides the account assignment GL for direct procurment but I can't find it.
Any suggestions would be welcome.
Thanks in advance
Allen

Hi Allen,
Please create wildcard entries for AccAssCat in IMG table
V_BBP_DET_ACCT, details see encl. file V_BBP_DET_ACCT.DOC
The issue is that even for subtype DP Direct Procurement Account
Assignment Category must exist, otherwise PO cannot be transferred
Accounting is going to be eliminiated one step later after ordering,
in background task, not visible to the user. Please realize!
I have uploaded V_BBP_DET_ACCT.DOC to SAPMATS, click on the following link.
Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=LL0BCK4LD9DE7XZOG9M7WGGNG11AWE43UCBMUW1T05TKD1IOK2]
Hope this helps,
Kind Regards,
Matthew

FBVB error msg "Transaction not defined for direct call-up"

Dear Gurus,
Pls help me on issues below:-
1.)What is the diff between FBV0 and FBVB?
2.)When i try to initialize FBVB. I received an error "Transaction FBVB not defined for direct call-up. Can u teach me how to fix it up coz one of my end-user requested this T-code.
Thanks.

Nothing needs to be fixed - the transaction is called behind the scenes when the user uses FBV0 to post a parked document. Users should never call FBVB directly.
Andrew

Goods issue for Individual PO

Hi friend,
when doing third-party "Individual PO" (item category group BANC, item category TAB) , do we do a Goods Issue?
If so, what transaction for Goods Issue do we use (MIGO, MIGO_GI, MIGO_TR, MB1A, VL01) ? What Movement Type
gets triggered when we do a Goods Issue for "Individual PO" ?
Also, in the Sales Order(VA02) -> Procurement tab, the Schedule Line is CB which is tied to Movement Type 601 (tcode VOV6).
Does this mean that the Goods Issue transaction i must use is VL01? In tcode OMJJ, it shows allowed transaction for
Movement Type 601 is VL01.
Can anyone provide some clarification on this?
Thanks so much.

X = customer
Y = my company
Z = vendor
Based on my understanding, third-party 'Individual PO' is slightly different than the regular third-party
PO process. In regular third-party PO process, X orders goods from Y, Y order goods from Z, then
Z sends the goods directly to X, Z invoice Y, then Y invoice X. Thus, this process, i know that there's
no need to post a Goods Issue like you said.
However, in the 'Individual PO' process (from what i've read),
Z would send the goods to Y instead of sending it directly to X. Then Y sends the goods to X after
receiving the goods from Z. Here, i would think we would need Y to post a Goods Issue (when Y is sending goods to X). Because when i do a Goods Receipt during the 'Individual PO' process,
transaction MB5B shows that the plant(i'm assumping it's Y's plant) shows "Total Receipts = 5,
Total Issues = 0 " and my inventory g/l account also gets Debited. Thus, i wonder if Y posting a Goods Issue to customer X would then result in "Total Receipts = 5 , Total Issues = 5" in transaction MB5B
and hopefully my inventory g/l account gets Credit as well.
Perhaps i'm confusing "Goods Issue" with outbound delivery VL01N?
Is there a difference between Goods Issue and Outbound Delivery?
Thank you.
Your reply has been very helpful.

Error in Part1 entry for Direct consumption.

Hai all MM gurus,
Generally in Std SAP, the system will create a single material document for the goods receipt and issue for the direct consumption procurement. From this material document it generates two Part I entries for register RG 23 C, one for the goods receipt and another for the goods issue. Instead the system generated 4 part1 entries for register RG23C, one for the Goods receipt & other three for the goods issue. How to resolve this error?. Please give ur valuable inputs.

Closed.

UCCX Finesse silent monitoring for direct dial calls

I completely understand that Finesse is geared towards the inbound contact center, at least for right now. Although I can't say the marketing materials really stress that. But I cannot understand the lack of silent monitoring for all call types. Currently silent monitoring only works for inbound calls from UCCX, and does not function for direct inbound calls, or direct dialed outbound calls.
From a system view, Finesse is using UCM's built in silent monitoring, via a very basic JTAPI command. There is very little engineering required to enable this functionality, and I truly thing is is a major limiting issue. Many customers in fact only want the ability to do silent monitoring and basic reporting, and Finesse would be a perfect product for this.
I am considering looking at putting together some custom scripts/web apps to engage the required JTAPI in CUCM via a Finesse Gadget, to replace the built in Finesse silent monitoring function. I'm curious if anyone has some input on how involved that might be, seems like I just really need to pass the monitoring DN and monitored DN through a JTAPI command.
More importantly, is there any hope for Finesse to support this natively? Or other outbound features? If it's a feature "in the works" we have a customer who might be able to "get by" using the Cisco Agent Desktop silent monitoring, but only if that is the case.
Good link on silent monitoring capability in Cisco Finesse: http://www.cisco.com/c/en/us/products/collateral/customer-collaboration/unified-contact-center-express/white-paper-c11-730883.html

We've got to delimit the problem.
When we use 3rd party recording solution there are 4 RTP flows: 1 incoming to monitored/recorded phone and 3 flows outgoing.
1 incoming RTP flows
- voice of remote phone
3 outgoing RTP flows
- voice of monitored/recorded phone
- voice of monitored/recorded phone sent to 3d party recording server
- voice of remote phone sent to 3rd party recording server
When we use a network analyzer we see that the agent running in the PC (UCCX 5.0) establishes two RTP flows for the monitoring session. But we can see that one of these flows sends 3 packet RTP per 1 packet RTP sent in the other RTP flow (in the same time).
We think agent sends to monitoring device all the outoing RTP packets of the phone (that belong to three different RTP flows), instead of sending only the RTP packets belonging to voice of monitored/recorded phone.
The other flow, voice of remote phone, sounds fine.
Is there a solution to avoid this problem when we monitor with UCCX 5.0 and record with a 3rd party software at the same time?
Thanks,
Christian

Func_exec reports: no handler function given for directive in iPlanet webserver 4.1

Hi,
I am trying to run servlets on iPlanet webserver fasttrach edition 4.1 on Windows NT,The web server starts ok as well, but when I try to connect to it I receive a server error and the following messages are in the error log:
for host 124.163.117.31 trying to GET /servlet/sample, func_exec reports: no handler function given for directive.
could you please give me some solution for this.
Thanks&Regards,
Anne.

means there is an issue with the the Init Loadmodules line. Normally, check the syntax, make sure the shared objects are where the web server thinks they are.
If all is good, in unix, check to make sure the init line is all ONE LINE with no line breaks.

Goods Issue for GR qty to Production

Hi
While doing goods receipt for a Standard Purchase order (no a/c assignment), we receive goods into stock. But, if there is open Production order (material is due for goods issue to production order) or open Sales order (but delivery yet to be created), then GR stock qty should comedown this extent as a goods issue to direct production / Sales and Balance qty should come into Stock.
Is this possible is in standard SAP with Inventory Management transactions? Please let me know your suggestions on this scenario.
Best Regards,
Suresh

Please see the documentation below by SAP
Manual and Automatic Reservations
The R/3 System supports manual and automatic reservations. Manual reservations are entered directly by the user. Automatic reservations are generated automatically by the R/3 System. There are two types of automatic reservations:
Reservations for orders, networks, WBS elements:
When an order, a network, or a project is created, the components from the warehouse are reserved automatically.
Stock transfer reservations:
If reorder point planning is used at storage location level and the available stock on hand falls below the reorder point, the system generates a stock transfer reservation in the plant for the replenishment quantity.
<b>You cannot manually process automatic reservations. For example, it is not possible to change reservations for an order directly. You have to change the components in the order. The system then updates the reservation automatically</b>.
<b>What are the Results of a Reservation?</b>
When a reservation is entered, the following events occur in the system:
The system creates a reservation document, which serves as proof of the request.
In the material master record, total stock and unrestricted-use stock of the material remain unchanged. Reserved stock is increased by the reserved quantity.
In MRP, available stock is reduced by the reserved quantity. This is visible in the current stock/requirements list. The reservation causes an entry to be made in the requirements planning file.

Result analysis for Direct Postings

Hi All,
I have a new requirement for Result Analysis determination at service order level
Requirement is while posting cost to service order we have two costs, one is through Activity (KP26) and another is direct posting using KB11N.
Both have different cost elements
615000 is for activity pricing using KP26 which posted 120 $
195009 is for direct cost posting using KB11n which posted 150$
Now after the actual cost is posted to service order we are doing result Analysis using KKA1, I am getting 120+150 in WIP. But requirement is system should ignore cost of direct postings using KB11N from WIP and it should calculate 120 alone in WIP
I hope there is no settings using DIP profile to control this, i read some help and it says using OKG4 and OKG5 this can be controlling
I tried using OKG4 with Line id and assigning Category as N , but it is not ignoring
Could you please guide on how to ignore direct cost entries being determined to WIP. I have a vague idea on OKG4 and OKG5
thanks for your help
santosh

Hello,
While OKG4 can achieve however please bear in mind that since you are not going to settle this cost anywhere, cost will always seat of Service order. When you try and close service order you will get error that not all cost is settled, this will further impact your month end RA / Settlement job.
I know we can still close service order having cost but that requires setting on Settlement Profile and most of organization have SOX which does not allow them to close Cost object which has balance onto it.
I am side tracking bit but wanted to bring this up as down steam issue.
Thanks
Parth

Issue for Direct PDFExport

Similar Messages

Maybe you are looking for