Issue - image date recognized only after metadata saved and re-loaded

I have been changing the Image Date on digitized scans to reflect the date the picture was taken, rather than when it was scanned. I use the "Date Created" field that is under "Image" in the IPTC data section. The Library Filter for date will not recognize that date until I save the Metadata to File, and then reload it (Read Metadata from file). Version 4.0beta

You've stumbled on two issues:
1. If you change the IPTC Date Created to a full date/time, e.g. 2010-01-01T00:00:00, the Library Filter Bar doesn't recognize the new date/time.   To avoid this problem, rather than changing IPTC Date Created in LR, use the Metadata > Edit Capture Time to change the date/time of an image. LR will write this date/time into the IPTC:DateCreated and XMP:DateCreated fields.
2. LR has never fully supported the current metadata standards with respect to date/time.  In particular, while the XMP standard allows for partial dates (e.g. 2010 or 2010:02), LR gets confused by them.  For example, you can use Exiftool to set XMP:DateCreated to "2010", import the file, and observe several problems:
- LR doesn't complain about a date format it doesn't support.
- The date doesn't appear in the Date Time Original field of the Metadata panel.
- The date/time under the thumbnail has the missing month, day, and time set to 1/1 12:00:00 AM.
- The Library Filter Bar gets confused.
Note that the Metadata > Edit Capture Time doesn't allow partial dates.
I suggest you file a report at the Lightroom Feedback Forum, where Adobe wants all problems to be reported:
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

Similar Messages

  • Data lock even after commit work and wait

    Hi Experts,
    Data is still locked even after commit work and wait step has run, which made me very confusing.
    The following are the details:
    These steps are in a FOP.
    Step1: Change Move-in Date of a move-in document in background after get the new move-date from user.
    Step2: Run BAPI_TRANSACTION_COMMIT and pass the wait parameter.
    Step3: Bring move-in document transaction to the user for other information changes.
               After the user confirms the changes and presses SAVE button, error message shows that the move-in document is still locked. But no other transaction is opened for the specified move-doc changing.
    Does any1 have any idea on this? How can I solve this issue?
    Thanks in advance and points will be rewarded.
    Vincent

    Hi,
    Normally every BAPI will work on Update task so that the data will be updated once the commit work is done. For the commit work, we will normally call the bapi function module - BAPI_TRANSACTION_COMMIT. It should work.
    In your case, just try the below option:
    Please call the bapi - BAPI_ACC_DOCUMENT_POST & BAPI_TRANSACTION_COMMIT in a seperate function module and call this function module in your program (just pass the import / export / table parameters accordingly).
    For the information, I had once a similar type of issue and it got solved once I did like the above.
    Regards,
    Selva K.

  • ActiveX container disappears after vi saved and recalled

    I can create a container and insert an active x object.
    The vi will run but if saved and recalled the control
    disappears! No other indication of a problem.

    This problem was related to the MS Forms 2.0 scrollbar. After talking to NI they recognized it as a known problem but it was not posted. The solution was to use the Microsoft Flat Scrollbar Control, version 6.0. This is fine except for the time spent looking around. It would have helped if it had been posted originally.

  • Image won't open after right click and "open with" command using Editor PSE 10

    Can't see image after right click and "open with" Windows XP command using Editor PSE 10. The editor opens but no image appears. I have to use the open command from within Editor

      Make sure you have chosen the application PhotoshopElementsEditor.exe and not a shortcut.
    To manually associate a file format with an application:
    In Windows Explorer, right-click a file whose file association you want to change. For example, if you want to change the file association for all jpeg files, click a jpeg file.
    Choose Open With > Choose Program from the pop-up menu.
    In the Open With dialog box, click Browse and then locate and select the exe application file.
    Checkmark "Always use the selected program to open this kind of file" and click OK.
    Note:If you choose a program from the Open With menu in step 2, instead of selecting the Choose Program option, this check box is not available, and the file association won't work.

  • How to make firefox to display page only after that page is fully loaded?

    I'm using some kind of simple monitoring tool, wich refreshes page every 10 seconds. And i see, how page loads: first text, then graphs. Is there any way to make firefox display page only after that page fully loaded to make such slideshow more smooth?

    Try to increase the pref nglayout.initialpaint.delay to a very large value
    *http://kb.mozillazine.org/Nglayout.initialpaint.delay

  • How can I delete an account, BUT only after having saved data

    I need to delete my account from the iPhone BUT not before having saved the current data. How?
    My Calendar, Contacts, Bookmarks sync is not working. As a solution, I was told to delete account from the iPhone, reset the iPhone, create my MobileMe account again on the iPhone and select Calendar, Contacts and Bookmarks to be synced using MobileMe.
    Fine, but I get a warning that all the information that I currently have in Calendar, Contacts and Bookmarks on my iPhone will be lost!!!
    That would be a problem, as I have entered a great number of new contacts on the iPhone, and I really don't want to lose them. Is there no way to MERGE without losing what's on the iPhone? Or can I save the Contacts and Calendar data somehow before I delete the account of the iPhone, so I can import them back later in a new account?
    In a nutshell: I need to delete my account from the iPhone BUT not before having saved the current data. How?

    If the sync process is not working between your iPhone and the MobileMe "cloud", is it working properly between the Address Book and iCal on your Mac with the MobileMe "cloud"?
    With a MM account, you can sync contacts and calendar events over the air, or direct with the supported applications on your compute via the iTunes sync process. You can do one or the other, not both at the same time. In order to sync direct with the supported applications on your computer via the iTunes sync process, you must turn Contacts and Calendars off for over the air syncing on your iPhone, which will remove all contacts and calendar events from your iPhone.
    I'm afraid you will need to manually enter the new contacts with the Address Book, the new calendar events with iCal on your Mac.
    There is an outside chance. Contacts and calendar events are included with your iPhone's backup. You can sync with iTunes to update your iPhone's backup before deleting your MM account on your iPhone - I suggest turning Contacts and Calendars off on your iPhone before deleting the account.
    Follow deleting your MM account from your iPhone by restoring your iPhone with iTunes from your iPhone's backup. This should restore the contact and calendar events on your iPhone from your iPhone's backup. Follow this by syncing with the Address Book and iCal on your Mac.
    There is a chance this won't work and if not, all contacts and calendar events on your iPhone will be lost in the process.
    Message was edited by: Allan Sampson

  • Issues with AR Invoice form after sending barcode and tab data to PC

    Hi,
    We have a barcode system to scan ItemCodes and send 5 x tabs 'keypresses' to the checkout users PC.
    This basically populates all the required fields on the AR Invoice row and jumps down to the next row ready for the next barcode.
    We have recently upgrading to 8.8, and we have developed an annoying issue.  Intermittently, the PCs not behaving as expected.  Here are some of the bad results we have experienced:
    1. The barcode scan is done, but the tabs being sent to the PC are not registered..  The PC just sits there with the cursor at the end of the (populated) ItemCode box without recognising that tabs have been sent
    2. The barcode scan is done and the ItemCode box is populated as expected.  However SAP has not processed all the expected tabs and the cursor remains one of the next few fields awaiting user input.
    3. As above the barcode scan is done and the ItemCode box is populated as expected.  However SAP has not processed all the expected tabs.  Also, the cursor is not present within the current 'selected' field - it seems to have almost lost focus from the fields on the form.  Note: the SAP window remains the active Window.
    All of this means that the processing of Invoices is being delayed as tabs are not being processing and form focus is being lost.
    The form settings are correct as they are unchanged from being working to suddenly stopping working.  The issue is occasionally resolved by a reboot of the client PC in question. 
    Is this a known issue in 8.8?  If not, is this most likely to be caused by display issues or SAP 8.8 not being able to handle the receipt of tab commands in such quick sucession?
    Any pointers or comments from your experience would be appreciated.
    Regards
    OB

    Which patch level are you using as this should be fixxed. I would also look if there are any conflicts with the add-ons as there some major changes in the SDK.

  • USB keyboard recognized only after restarting.

    Everytime I connect my USB keyboard to my rMBP I have to restart OS X to make it work. How can I make my MacBook recognize my USB keyboard without restarting?

    Morning Persian Apple,
    Thanks for using Apple Support Communities.
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
    For more information on this, take a look at this article:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Best of luck,
    Mario

  • Hello! i downloaded OS X Mavericks on my mac .since then my computer didn't restart properly.My desktop image doesn't appear after logging in and i'm unable to shut it down.

    Hello! I downloaded OS X Mavericks on my Mac and my pc didn't restart properly.my desktop image doesn't appear and i can't shut down my pc. what can i do ?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Consistently getting error on attempting to open a cc 2014 file even after just saving and closing

    I keep getting the above problem. The file is not corrupted as It will eventually open after many attempts to clear cache, or registering into the CC. It can be as many as 10 times trying different combinations before it will open the project file. I keep saving as in order to produce another project file and again the same problem. Is anyone else experiencing this? Any answers to a very off putting and critical experience?
    In the end to open the project I had to open a first version of the edit that opening in Premier CC which asked me to update the project file to a newer version of CC2014 which I did. Then open the most recent version of the edit at that stage instead!!!
    I am very unhappy with this approach and dont know how to get this problem saved out of this edit project - amy ideas will be very gratefully recieved! I previuosly have tried saving as now in the newer verion of the software and would expect the problems to be resolved and be able to open the new version without trouble.
    I am working at this time on a PC.
    Should i be uninstalling the earlier premier pro cc? Just concerned this may leave me with no way of teasing open this project!!
    Thanks

    dannyroger
    What version of Premiere Elements are you using and on what computer operating system is it running?
    Premiere Elements is not part of the Creative Cloud applications.
    If your program is Premiere Pro, you have posted in the wrong forum. If that is the case, please repost your thread in
    the Adobe Premiere Pro Forum or wait for a moderator here to see your thread here and move it from here to there.
    Premiere Pro
    Looking forward to your clarification with further details.
    Thanks.
    ATR

  • Boots up only after turning on and off several times then freezes

    I've been trying to repair my hp pavilion a6357c.....it keeps freezing up and it takes for ever to get it to boot up....I'm now using a repair disc that I made 2 years ago to boot up.....it seems to work.....I've also vacuumed out the insides and changed
    the cmos battery.....no change......today I got an error message 0xc0000001 and it said that "\windows\system32\boot\winload.exe" was either missing or corrupted.  Another help site said I would have to reinstall the OS.  My OS is windows
    7 professional that was upgraded from windows 7 home premium which was all done on line.  I've tried to reinstall it using my product key but they tell me my key doesn't work.   Does that mean I have to buy it again?  If so I'm junking
    this computer.

    Wag,
    Upgrade keys will not work for a fresh installation. They are designed to be used for upgrades only. I know because I had this issue with Windows XP back in the day. I was able to get around the issue by calling the number listed in the "Show
    me other ways to activate" screen and explain to them that I upgraded from home to professional and no longer have the home installation media. You might find luck taking that route, or they may not help you at all.

  • DIMM works only after shut-down and restart

    I put a 1GB DIMM (DDR SDRAM PC2100U-25330) in my iBook G4 1.42 GHz about a year ago. It works, according to the Activity Monitor and its often in use when I'm working in Photoshop. But when I install new software and restart, the computer doesn't detect it. I have to shut down and start up again to make it work. I've tried reinstalling the DIMM but no dice. Anyone with a similar experience? Thoughts on how to fix it?
    Nick

    Quit Mail.
    Select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library/Mail
    Restore the folder that opens from a backup made before the problem started. Relaunch Mail and test.

  • Mac OSX will not boot, when I log in, it shuts down after grey screen and grey loading bar show up: PLEASE HELP (:

    So here is a lowdown on my problem.
    I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted").  Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual.  I enter my password, hit the enter button (like I always do), and this is where my problem begins.
    After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath.  This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down. 
    No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
    NONE of the startup/boot commands work except holding the alt/option key.  I can't hold: Command plus r; command pr  to reset PRAM; shift to enter safe mode.
    I really dont know what to do here :/.  I have files that I want on the hard drive, that are pretty important but not critical.  I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
    More information that may be helpful:
              I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
              My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
              The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open.  Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
              Again, boot commands will not work, except for holding the alt/option key.
    So if anyone can help me fix my problem(s), which are:
    1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
    I would love you forever.  I would really prefer 1 or 2.  Thanks for reading this.

    Oh and one more thing, I do not have a disc drive in the mac osx.  The version I have comes without one.
    I am very puzzled about what to do right now.

  • RAW image date not exporting

    Hi there
    Currently I shoot everything as JPG, but would like to start using RAW on my Canon 300D. I have done a few trials, and find one thing perplexing – if I shoot in RAW the image date shows up in Aperture. When I export and add the exported JPG to my iView catalog, no Capture Date (image date equivalent) shows up. When I do the exact same steps after shooting in JPG, the Capture Date appears without any problem.
    Is there a way to have the image date added to the metadata of the exported image?
    Hannes

    I'm not sure about this but the problem may be that there are different "flavors" of EXIF data. I believe there's a basic set of data that all camera manufactures have agreed to and then there's custom EXIF data specific to a camera, lens, strobe, or manufacturer.
    It may be that Apple has chosen to only support the generic flavor(s) of data while ignoring the custom ones. I think that's why cell phone syncing with Address Book only gets some data to the phone. Pictures, groups, and the like are probably different for every phone and Apple decided not to support it. But I don't know that with certainty.
    If you want to see what data is actually in the original and the exported files download a free copy of ExifTool by Phil Harvey from http://www.sno.phy.queensu.ca/~phil/exiftool/
    It's a great tool and shows me more data for my Cannon camera's images than Canon's own software does.
    MacBook Pro 17" (with crappy screen)   Mac OS X (10.4.8)  

  • How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

    Hi All,
    I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
    This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
    I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
    When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
    But the user wanted the data to be populated from only the present year and the previous year.
    So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    PROPERTY PALETTE (ENQACMDTL block)
    WHERE Clause
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
    The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
    The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
    ENQNO
    RATNG
    2013900054
    500KC2
    2013900047
    800KC4
    2013520018
    750KC6
    2012900037
    1000KC2
    2012520109
    500KC2
    2012140019
    750KC6
    2011540036
    500KC2
    2011100030
    1000KC2
    2006100007
    90KD8
    2006750014
    750KC6
    2006900072
    500KC2
    The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
    So when i query on the field 'RATNG',
    Example:For RATNG=500KC2;
    I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on  EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
    I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
    Other than 500KC2 RATNG, no other RATNG must be displayed.
    The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
    I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
    Can You Help me or tell me what do i do for this?
    Hope I'm clear with my question!!
    If my question is not clear, let me know plz.
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle forms 6i.

    On key-exeqry you have to program.  Delete all other trigger codings for checking your condition.
    It dint work on key-exeqry.
    I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
    It did not display the message.
    I have a 'PUSH-BUTTON:EXEC_QUERY.
    For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
    I added the following code:
    if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
         message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
         raise form_trigger_failure;
    else
         execute_query;
    end if;
    It is working fine and the message is being displayed.
    But again I have a new problem and that is;
    On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
    but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
    FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
    but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
    The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
    How do i solve this?
    Thank You Priyasagi.

Maybe you are looking for