Issue in Adhoc-Query_Bank details(IT0009)

Hi Guru's,
I created a query for Bank details IT0009,And tried to execute .
In table i have 1480 records,But report showing 1495 recordes.
For few Perner's Its coming duplicate.One record coming with exact data and one record with full blank date except Personnel Number.
Can one of you give me some solution,with out extracting the blank record.
Currently we are in Moc testing for GO-LIVE.
Thanks,
Anitha

Hi Anitha,
Multiple lines normally have two sources:
1. Split
If you e.g. have an output defined that contains IT0000 and IT0009. Evaluation period is he whole year.
IT0000 has a split because of Org.reassigment in this year.
This leads to two data sets in it0000 and therefore a split that also leads to two output lines.
-> Try the output with key date this normally eliminates such splits.
2. Subtypes
In case an infotype in the output has multiple Subtypes this can also lead to multiple lines for this infotype and therefore also multiple lines in the output.
Regards,
Michael

Similar Messages

Performance Issue With Displaying Candidate Details for iRecruitment

We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant> the page spins for a quite whille to show the results and some times we see the 500 errors..
We are in R12.1.3 and also applied the Patch.10427777:R12.IRC.B patch.. is there any tunnign steps for the iRecruitment page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
thanks

Issue in adhoc Query

Dear All,
When i am running adhoc query for a particular infotype iam getting fine.
My issue is iam not getting the start and end date of the record.
can any body help me out how to get the start date and end date of each record.
Thanks in advance
Regards
Ananya.K

Hi,
If you want to add the dates to the output of the querry, While creating/editing the query, you should add feilds ENDDA and BEGDA for the infotype to get the start and end date correct.
If this does not answer your question, could you explain your query in detail?
Thanks,
Dhiraj

Issue in AdHoc Report result

Hi Guys!
This is the AdHoc Report SS_PH0_48000513. When two different person runs this report based on same selection criteria then for one person the result shows 2400 hit list and for other person it shows only 200 hit list. Does anyone have any solution to this problem.
The selection criteria is employee sub group and company code and output field is pernr.
Regards,
Arul Joseph Isaac

Hi,
Please compare the authorizations of these two persons'.
Generally, this kind of issues end up to be auth. issues.
Regards,
Dilek

Issue in MIGO item detail tab Enhancement

Hi,
I have enhanced MIGO by adding a text tab in the item detail section which shows the PO texts as in ME23N
'texts' tab.
Now when the user executes tcode MIGO and enters the PO number for doing goods receipt
the the text tab screen flashes before the material tab is displayed at the item level.
The text tab screen is designed like the ME23N text tab with a tree control and editor.
I searched SDN but could not find any related link for this issue.If there are any such issues answered
please give me the link for the same.
Thanks,
R.Paul

Hi,
Did you use MB_MIGO_BADI?
Regards,
Arpan

Issue with Adhoc queries

Hi,
Background: 3 additional fields were added to infotype 0023 to capture the position at the previous organization, Years of exp and Months of previous exp.
The year and Month of previous exp gets populated automatically if you save the start date and end date.
Issue: We try to populate a repot using adhoc query but it doesnot give proper data. example if 0023 has been updated for 100 employees the output would reflect only for 20 odd numbers.
There is no authorization problem
Can anyone suggest why we are facing this issue and if this can be resolved also is there any standard SAP reprot which can give a listing of 0023 for a list of employees
RB

Also, if the dates of IT23 are before hire date (as they often are), you need to set the switch for time-dependency. You do this in "extras" -> "Code". The syntax is shown below, and the *$ is part of the syntax
*$HR$ [P0022,P0023]
*$HR$ TIME_DEPENDENCE = 'INDEPENDENT'
You still need to ask for period all, but then it should work.
Hope this helps.
Kirsten

Issue while updating vacancy details through 'RH_UPDATE_DATABASE'

Hi,
i am trying to update the vacancy details through a Zprogram.
This zprogram updates the infotype 1007 correctly which is done by:
CALL FUNCTION 'RH_INSERT_INFTY'
    EXPORTING
      fcode               = 'INSE'
      vtask               = 'B'
    TABLES
      innnn               = lt_1007   " lt_1007 has all the values for updation.
After this i am calling the fm :
CALL FUNCTION 'RH_UPDATE_DATABASE'
      EXPORTING
        vtask     = 'S'
      EXCEPTIONS
        corr_exit = 1
This updates the infotype 1007 in the database but the vacancy table T750X is not updated.
However if i run the zprogram in foreground, this FM 'RH_UPDATE_DATABASE' updates infotype 1007 and also the table T750X. But in background mode only infotype 1007 is being updated and not T750X.
Please let me know if any idea on how to solve this.
Thanks.

any inputs on this if any one had the same issue using 'RH_UPDATE_DATABASE'.

Issues in displaying the details in the transaction CS03

Hi Group,
I am facing an issue in the Transaction CS03 while displaying the EXTRAS->MORE->Parameter Eff Value Assignment as under:
we have created a set of BOM items on the previous data(21.11.2011) with a different Changed documents for the two BOM items. when we checked the same in CS03 with the Effectivity 'Serial no' , Date (as today - 22.11.2011) and Material as Main material, the System is throwing a message 'No items are valid on 22.11.2011) and when I checked with the same using the Current date(22.11.2011), the BOM items are getting displayed correctly.
Now the requirement is that, the User should be able to see the BOM item details(irrespective of the dates) using the Serial number created in the Change document number for the BOM items.
Kindly provide inputs ASAP.
Thanks in advance for your help.
Regards,
Vishnu

hi Group,
I resolved the Issue myself by managing to populate leading zeros for the Serial Number while creating the Change document number and it resolved the issue.
thanks for your help.
Regards,
Vishnu

Captivate 8 resolution issues - devil in the details

I want to get good resolution with imported power point, and also video demo screen capture. My priority is on the video demo, because I am capturing a fairly busy screen with much text and graphics, and the __ text may be rather small ___ . The issue is that with any scaling, even 10 %, some fonts will appear off and chopped. My target resolution is 1024x768( I defined this at project creation). when i captured, i had captivate size my window to the red 1024x768 box. But the resolution is NOT as good as I expected. I wonder - does the button window (stop, skip, etc.) that gets added at the bottom of the window screen things up ? In other words, if the vertical resolution including these buttons is 768, then the content window may be something closer to 700. This would explain the odd effects. Adobe must have this all figured out already in best practices. need to have the captured video look the same as the original- there is no technical reason why this is not possible.
thank you!

Thanks for the thoughtful suggestion. I carried out an experiment using your method, and I didn;t see too much difference in the captured video quality for the text. It might be better, its not obvious to me. master project is 1024x768. I made the video capture project 1600x1200 to match my 2nd screen monitor resolution. I see there is some odd behavior with the red rectangle that appears for capture; this seems to be a bug for 2 screen operation. In any case, I ignored the 'snap to application' so it didn't matter.
I also see that the effects are really in a few categories: scaling, image compression, and dynamic range. I have left the compression options at default, but i experiemented with 32 bits instead of 16 bits. This gives marginally better text contrast and clearer icons.
Since capturing a screen session with text and icons is not an unusaly requirement, it would be great if there are guidelines for 1:1 scaling. They must exist, but in the meantime I'll keep experimenting. Next I'll have to try some more detailed graphical items, and also manual zoom and pan.

Urgent Issue - Immediate=true vs Detail form behavior

I have an ADF Faces Master Table and a Detail Form (both on the same page - this is a functional requirement). They were created using the ADF Faces Master Table Detail Form Control and are based on a Master Detail Entity based View Object.
The underlying Entity Object has some basic validations (ex: Required Name, Address)
I have different actions in the page (Save, Add, Delete), all of them execute the corresponding data control methods.
For Delete and Add I want to bypass input validation so I set immediate="true". So far so good.
Now the issue (or bug):
1. The user selects a record from the master table.
2. The user modifies some values of that record in the detail form (ex: name).
3. The user hits Save - > Values are committed to the database and the master table is refreshed with the detail values.
4. The user hits Add (note that previous values are still there).
5. The user enters Add mode but the values from the previous record are still there.
Correct behavior should be that the current form values are cleared out when hitting add.
I already tried the following in the Entity Object Impl class with no luck:
protected void create(AttributeList attributeList) {
setName("");
super.create(attributeList);
The only way I see it works is by setting immediate="false", but validations are not bypassed here.
Any suggestions / experience with this issue is greatly appreciated.
Thanks,
Claudio.

Hi there, I had the same problem and between us at work we spent 5 days trying to figure this out. The solution is:
* The 'Cancel' commandButton (or commandLink) has immediate="true"
* The inputText fields do not specify immediate (and are therefore immediate="false")
* The action in the backing bean invoked on Cancel click must return an outcome, eg. "list"
* There must be a navigation rule in faces-config.xml for the action, eg. as follows
<navigation-rule>
     <from-view-id>/Admin.jsp</from-view-id>
     <navigation-case>
          <from-outcome>list</from-outcome>
          <to-view-id>/Admin.jsp</to-view-id>
     </navigation-case>
</navigation-rule>* sessionMap.remove("/Admin.jsp") is not necessary
If the action outcome string is null or cannot be found in faces-config.xml, then stale values from the component tree are re-displayed - the bane of many JSF programmers lives. Tinkering with the UIViewRoot seems to have no effect.
Hope this help...
- Adam.

Issue in displaying header details in ALV report

Hi,
I have used slis_t_listheader and REUSE_ALV_COMMENTARY_WRITE to display the header details in ALV report.I want the details to be displayed as below.
Requester : ----------------------                                                                               Page: 1
Program: -----------------------                                                                                Date:---------
                                                                 Title of Report
But when I use the structure slis_t_listheader to display the header details,all the fields are coming one below the other.
How can I get the fields as shown in the above format
Edited by: Abaper12345 on Jun 25, 2009 7:54 AM

Hi,
Go through following code... its showing the data exactly the way you want....
REPORT TEST3.
TYPE-POOLS:slis.
TABLES:MARA.
*Type Declaration
TYPES:BEGIN OF t_mara,
      matnr TYPE mara-matnr,
      ersda TYPE mara-ersda,
      ernam TYPE mara-ernam,
      END OF t_mara.
*Internal Table
data:it_mara type standard table of t_mara.
*Work Area
data:wa_mara type t_mara.
DATA:i_repid TYPE sy-repid .
i_repid = sy-repid.
*Declaration for field catalog
DATA : fcat TYPE slis_t_fieldcat_alv,
       wa_fcat TYPE slis_fieldcat_alv.
*Declaration for Layout
data : WA_LAYOUT type SLIS_LAYOUT_ALV.
*Initializing ColumnWidth_Optimize For Layout
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
START-OF-SELECTION
START-OF-SELECTION.
*Fetching data into internal tables
PERFORM get_data.
*Buil Fieldcatalog
PERFORM build_fcat.
*Display ALV Report
PERFORM alv_display.
*Build Fieldcat
FORM build_fcat .
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Material Number'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERSDA'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Date'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERNAM'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'User'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
endform.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
form GET_DATA .
select matnr ersda ernam from mara into table it_mara.
endform.                    " GET_DATA
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
form ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = i_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = fcat
TABLES
    t_outtab                          = it_mara
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " ALV_DISPLAY
*&      Form html_top_of_page " I_CALLBACK_HTML_TOP_OF_PAGE "
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
CALL METHOD document->add_text
EXPORTING
    text          = 'Program'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_text
EXPORTING
    text          = 'Requester'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_gap
EXPORTING
     width      = 125
CALL METHOD document->add_text
EXPORTING
    text          = 'This Is Test Data'
    sap_color     = document->list_group
   sap_fontsize = document->LARGE
   sap_fontstyle = document->standard
   sap_emphasis = document->strong.
ENDFORM.                    "HTML_TOP_OF_PAGE
Thanks & Regards
Ashu SIngh

Strange issue in Family dependents details

We are implementing ESS/MSS for India country grouping.
ESS Personnel Information -->>> Family dependents service allows the employee to add new spouse at anytime. It means the New Spouse button is always available in WDJ screen even though a spouse already been added.
Ideally, New spouse button has to be disabled. I have checked the WD iview personalization and no luck found. These buttons come from spro customization settings in ECC backend.
I have checked -
>>>> Determine Active Subtypes and Make Settings. The check box "New Button Always Available on overview" is a mandatory field and it a time constraint value 2.
Furthermore, I have checked "Determine Active Subtypes and Make Settings" for Infotype 0021 and subtype 1 with Use case "B2" (button shouldn't be available once an infotype record exists).
Anyone has gone through this problem ? How to disable the button ? Any inputs in this regards would be greatly help.
Regards,
Anil Kumar

Please do not give answers just for sake of getting points.
As I already mentioned, we are implementing ESS/MSS for India country grouping and you are telling to give the following entries
08 0021 1 A1
08 0021 2 B3
in View V_T7XSSPERSUBTYP where 08 stands for United Kingdom. Now, why is the entry for 08 (UK) required here ?
By the way, the issue has been resolved. It was related to time constraint issue and the solution is in spro customization itselfs.
Personnel Management --->>> Personnel Administration -->> Personal data --->>> Family --->>> Personal data --->> Define family types.
Just unchecked the required option here.
Thanks for your time.

Issue with number/contact details showing on new iPhone

Hi I'm having an issue with numbers. Myself & my mum both have iPhones. My Mum had previous phone (not iPhone), she purchased an iPhone & ported her old number across. before she ported we were texting each other on the new iPhone number. Now she has ported her old number to iphone, when she texts me it still shows the number she got with iphone, not her contact name or original ported number which I have saved, however if she calls me it does show her contact name & not the number. When I text or call her contact in my phone she does get it, however message sends as txt message not iMessage (iMessage is active on both phones) hope this all makes sense. can anyone help at all?
Many thanks

Swipe down from the middle of the screen to open Spotlight Search then type Contacts. If it is in a folder the folder name will be to the right of the Contacts listing in search.
By default it is in the Extras folder on the second page.

Issue with changing bank details.

MY iTunes account keeps telling me to come to this website when I try to change my bank details. What is the solution.
thanks

If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know whyyou are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

DMEE issue in header and detail record

Hi Gurs,
I am working in DMME payment medium .
I have declared DMEE header structure(00000001000001 ) as level 1 and detail (050000010020192             XX110000001) as also level 1.
This is the output format i am getting.
00000001000001
05000001002000             XX110000001
00000001000001
05000001002012            XX110000002
00000001000001
05000001002012             XX110000003                                                                00000001000001
05000001002011             XX110000004
But my requirment not lke this. i need to dispaly all detail items under one header also i need to increase the counter for every items starting from 2.
Both header and detail are at level 1.If i declared the detail as level 2 the output is not generated.
This is what i need.
00000001000001
05000002002000             XXX110000001
05000003002012             XXX110000002
05000004002012             XXX110000003
05000005002011             XXX110000004
Pls suggest me any solutions
Thanks .

NOT answered

Issue in Adhoc-Query_Bank details(IT0009)

Similar Messages

Maybe you are looking for