Issue in Creating a screen variant for FV50 through SHD0

Hi,
I need to create a Screen variant for FV50 to hide the post button through the Transaction SHD0, It was working fine and the function keys BU and BS  i disabled in the variant, but the problem is when i disabled the Function keys from FV50 it is not allowing me to post the transaction in FBV0 also. I found that T code FV50 is using the program :SAPMF05A  and FBV0 is using : SAPMF05V.
Is there any way to overcome the issue through the transaction SHD0 ?
Regards
San

Hi,
To Create  aVariant You can use Tcode : SHD0.
Provide the tocde and clik on Screen variant and create...
You can follow the below link as Reference ..
Link:[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Hope it helps you.
Thanks
Arbind

Similar Messages

  • To assign Screen Variant for VL02N to respective user.

    Hi Experts,
    I have created one Screen Variant for TCode VL02N. It is very well working if executing with SHD0.
    Now, I want that, if any particular user say XYZ executes VL02N, then VL02N should be executed with the variant I created, for that user.
    Plz. tell me what to do for this....any authorization object needs to create or is there any other way out.
    Thanks in Advance.
    Rgrds,
    Rahul

    Rahul,
    Am not sure whether you can create user-group from SHD0.
    just try to use these exit and do small code just like this:
    is sy-uname = than perform.
    Enhancement                                                                               
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outboun
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc  
    V53W0001                                User exits for creating picking waves              
    V53C0002                                W&S: RWE enhancement - shipping material type/time s
    V53C0001                                Rough workload calculation in time per item        
    V50S0001                                User Exits for Delivery Processing                 
    V50R0004                                Calculation of Stock for POs for Shipping Due Date L
    V50R0002                                Collective processing for delivery creation        
    V50R0001                                Collective processing for delivery creation        
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fie
    V50PSTAT                                Delivery: Item Status Calculation                  
    V02V0004                                User Exit for Staging Area Determination (Item)    
    V02V0003                                User exit for gate + matl staging area determination
    V02V0002                                User exit for storage location determination
    Amit.

  • Regarding Screen Variant for tcode va11

    hi all,
    i am trying to create a screen variant for tcode va11. the fileds in the item level has to changed.. we have a requirement to show only those fields that are usefull as per our clients requirement.. there are fields which will never be used .. so we have top remove it .. i have created a screen variant and made all the fiedls not needed invisible .
    then i link this csreen variant to a transaction varaiant .. howver when i execute
    this i don't find any difference in screen .. guess my screen variant not working..
    Is there anything we have to take care for table control.
    the Program name is SAPMV45A
    Screen number is 4900
    please if any body has done this before ,,kindly suggest.
    thanks and regards
    Sriniavs

    this variant is in Active state ?
    what is system status ?
    check which PF/GUI it is using .
    system-->status>Program here u have to get ur Zvariant name.
    Regards
    Prabhu

  • How to create transaction or screen variant for custom tcode in module pool

    Hi,
              I have one module pool program with custome tcode ,i want to create transaction or screen variant for this tcode.Next time when we run this tcode we need a variant for this tcode.
    I tried by using of SHD0 but it is working only for standred tcodes.Is there any possibilty please help me.
    thanks,
    Lavanya.

    Hi,
    you created a Custom Tcode for ur module pool Pgm..if u execute the Tcode in the output screen give the input details and press Save Option then variant will be created. Then you can use that variant.
    otherwise.. while creating a Tcode..
    select an option for Tcode type Tranasction With variant ..there u will provide the variant for ur Tcode ( which is already created ).
    Regards,
    PraVeen.

  • Screen variants for particular orders

    Hi,
    I have a querry.
    My client wants to make the material and quantity fields uneditable in CO01 and CO02 T-codes.  For this we have created a screen variant. But the practical problem is we are having Rewqoek Order types also. For this Rework Orders the material and quantity fields should be editable.
    So is it possible to tackle this problem by screen variants?
    Is it possible to call screen variant only for a set of order types?
    Regards
    Amit Parkhi

    Hi Parkhi,
    You can create a different screen variant for Rework Order type & then use to solve this issue.
    Please confirm.
    Regards
    R. Senthil Mareeswaran.

  • Why I cannot create a screen variant?

    Hi Gurus,
    In transaction SHD0 I am trying to create a screen variant but it is marking the following error:
    Attribute for user MYUSER contains errors. Inform system admin.
    Message no. BBP_PU245
    In transaction SU53 display message: The last authorization check was successful.
    The screen variant I am trying to create is for:
    Transaction code: BBPSC02
    Program: SAPLBBP_SC_UI_ITS
    Screen: 300
    Somebody can say to me why marks the error?
    Thanks

    Thanks Jay,
    MYUSER was not in PPOSA_BBP. I added it and no longer display error.

  • Selection screen variant for report

    Hi,
    Can we restrict the selection screen variants for reports by user? For example my report is ZREPORT. Different users can save variants for the report. When they choose a variant for executing the report, they would like to see only the variants they created.
    By default SAP lists all variants created (irrespective of who created).
    Thanks
    Anil

    Hi,
      If you want the other users doesn't want to execute (Not see) other variant..you can check if that user has created the variant in the AT SELECTION-SCREEN event..
      By checking VARI-VARIANT against the table VARID and check if sy-uname <> VARID-ENAME.
    Thanks,
    naren

  • Screen Variant for VA02

    Hi,
    I have a requirement according to which I need to make few fields of transaction VA02 as output only.
    While we create a sales order using VA01, all fields should be writable but when we open the sales order in change mode(using VA02) fields Ship-to-party, Net-Value should not be editable whereas all others should be. I have created a transaction variant for VA02 and also activated it. But the changes are not getting reflected when I open a sales order using VA02.
    Can any body help please. Thanks in advance.
    Regards,
    Dhiraj

    HI
    After Creation of Screen for reflecting changes you have to active screen variant
    Screen Activation procedure:-
    STEP1: T-code:SHD0 --> Enter transaction code: VA02
    STEP2: Click on "Stanrad Variant" tab --> Again choose "Standard variants tab"
    STEP3: Enter your variant name --> click on Active(Button)[it is in right  side of inputfield name]
    Appreciate points if it is useful.
    Thanks & Regards
    Sudheer Madisetty

  • Screen Variant for ENjoy Transaction

    Hi all,
    I want to create screen variant for enjoy transaction, i.e fb60. Through the guide in another threads, I click on the square icon, above the scroll bar on the table control (used for entering document line items). When I create new variant, hide some columns and save this screen variant, everything is not changed. How to apply this screen variant to this transaction ?
    I also use function "Add screen variant" when right click on this screen, but nothing changes.
    Thank you very much for your helps.
    Sylvecat.

    That little button you mention (above the scroll bars) will not create screen variants for this transaction.
    You have to use transaction SHD0 (also accessible by pressing Ctrl+F4 once you are inside FB60).
    Search inside http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBCEX/BCDWBCEX.pdf for the keywords SHD0 more info on usage, etc. if you need help with SHD0.
    Please remember to assign points if found useful.
    Regards,
    Gulshan

  • Default screen variant for a user in T.Code - FB60

    Dear All,
    My client requirement is create a new screen variant for T.Code - FB60 & make it default for certain user.
    Your help will highly appreciable.
    Regd,
    Sp sahu

    Hi Sahu,
    Have a look at URL
    http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
    Hope this provides inputs.
    Thanks
    Lakshman

  • Screen Variants for items

    Hi
    very one GM
    Can any one what is the procedure of Screen variants for items
    in FB50
    FB60
    FB70
    Pls suggest  at least one

    Hi,
    For FB60
    A) For the Header Data.
    1. Go to FB60.
    2. Click on Edit in the Top Header Bar.
    3. Click on Screen Variant & then Click on Create Screen Variant.
    4. Create your own variant.
    B) For the Line items
    1. In the Line item box on the Top Right corner there is a configuration button , click on this button. The Table setting window will open.
    2. Go to Maintain Variant box.
    3. Enter the Variant Name here.
    4. Click on Create.
    Similarly you can do for FB50 & FB70.
    Reward points as a token of your appreciation.
    Rgds
    Prasad

  • Screen variant for Fb60

    Hello People,
    Can Anyone help me with screen variants for transaction FB60.
    Actually i want to make the field Business place/Section  as mandatory.
    I tried creating screen variants .But The checkbox for making the field required is greyed out.
    Can anyone help out?

    Hi,
    make use of Tcode SHD0 and see its documentation
    Reward points if useful..
    Regards
    Nilesh

  • Screen variant for cost center

    Hi,
    How to assign a new screen variant for cost centers to all the new cost centers?
    Thank you!
    Dorel

    Biro,
    You could use transaction SDH0 to create and activate a new screen variant for transaction KS01(Create Cost Center).  Be aware that this change would impact any person using that transaction for any company code and controlling area, so  I suggest unless it is extremely necessary you use it with caution and assess its impact throughout both the system and organization.
    Hope this helps.
    GG

  • Screen variants for Header details info

    Hello Experts,
    I have a requirement to use Screen variants for the header related details to default values in FB50 and use Account assignment template for line item related details.
    We can create the screen variants in FB50 by right click on "screen variants for item" folder and select Create Screen variants in Screen variants. Even if i follow the alternate path to create screen variants in SHD0, and add it in the Tree of FB50, i still am not able to get the header details after choosing the created screen variant.
    Can someone help me to achieve defaulting the header information in FB50 using screen variant and tell me how can we use account assignment template after defaulting the header data?
    Thanks,
    Sindhu
    Edited by: SindhuSSwamy on Dec 22, 2009 2:55 AM

    Hi Bill,
    Yes, There are ways to disable these links. Since, You are in SRM40 (Think There is SRM40/EBP(SRM Server 50)only), you should be able to use BADU BBP_SC_MODIFY_UI to hide them which is simple.
    Regarding Ship-to/Performance Location, Use Doc Change BADI to read storage location address and pass it onto Ship-to/Performance Location. We have done many times in the past.
    SAP standard screen variants for the Shopping view is very limited. But, you can develop you own screen variants in SHDO and use Screen Variant BADI to trigger your customs.  We had used this and is pretty good. No hassle of HTML changes / maintaining them every upgrade. 
    Thanks,
    Jay

  • How to create a screen variant

    Hi Gurus,
    We need to create a screen variant(Tranasction - BBPSC04) SRM 5.0 tell us the step to create
    Regards
    Paul

    Refer this link
    http://help.sap.com/saphelp_nw70/helpdata/EN/67/232037ebf1cc09e10000009b38f889/content.htm
    Regards, IA

Maybe you are looking for