Issue in document creation

hi all,
when i am creating a document in pm-wcm  it shows an error Message no. I4812
Update could not be completed successfully in sap
kindly help me pls

Hi Peter,
SAP Note 1721446 might help.
Regards
Gary B

Similar Messages

  • I am facing problem document creation the error is Message no. 3G103

    i am facing problem document creation the error is Message no. 3G103

    Dear Satish,
    Usually this error is due to a wrong customizing.
    Go through note 1594322 and 179655 will help you to make an analysis of this issue, you should created an excel file for each wage type which should be posted as it is showed in the note.
    1594322 Error message 3G103 in RPCIPE00 & RPCIPE01 'Posting balance is
    not cleared'  179655 RPCIPE00:Rejectn, employee w.posting bal.not clrd
    Best Regards,
    Deepak.

  • Authorization for Measuring document creation

    Hi,
    i have one issue. I want to provide authorization for measuring documents creation. That has been done by providing the different authorization groups in roles for T codes IK11, Ik12 etc to the users. Now users with a authorized authorization group for perticular measuring point can create a measuring document fo that. But the problem is that despite the authorization group, if user goes to t code iw41 for order confirmation , there he can create measuring documents of any authoprization group. How to control that thing. I also give authorization group authorization for t code IW41 but still it is allowing for the creation of documents. any help on this thing.
    Regards,
    Aman Sharma

    Hi
       there are two ways you can control the measurement reading entry
    1. Block the authorisation of IK11.When you go to confirmation screen through IW41 , there a button for measurement document update. Even the user will press it system will not allowed to enter in it as he is no authorisation
    2.You can configure the screen template for overall confirmation  and use this profile while doing overall confirmation using iw42. There you can hide the measurment detail screen.
    customising node " Set Screen Templates for Completion Confirmation "
    Regards
    Amar

  • Excise Invoice List-Pending for ARE document creation

    Dear All,
    Is there any standard Tcode for getting the list of excise invoice which are pending for ARE documents creation or with the status of ARE documents.
    Thanks & Regards,
    Antima

    Hi,
    No there is no standard report available for this requirement.  You may need to develop a Z report.
    J1ARE_AGE gives u the status after creation of ARE1.
    Thanks
    Krishna.

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • Automating Goods issue during Delivery creation

    Hi all,
    We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
    We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
    But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
    The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
    I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
    Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
    Thanks,
    Packia

    Dear Siva,
    As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
    Please let me summarize, I am really desparate here:
    This is only IM related, Not WM.
    Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
    Issue is not Aut. PGI.
    VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
    In the deliveries of correct processed shipping points  I do not find any picking output type.
    Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
    There is no picking block active.
    PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
    Can you please try to help me out?
    Tnx & regards,
    Chris

  • Document creation

    hi guys,
    i have one requirement. I want to upload thousands of technical manuals in to SAP . So what i did is i made one BDC for document creation and uploaded in the system. Now the problem is the doucments created have status create. By BDC i am not able to change the status to in work and released. Without releaseing the document i am not able to use it in equipment master data.
    Can anyone kow how to do the mass change of documents where i can change the status to release from create. Or any other program for this

    Hi,
    Its simple ask the concerned developer to make a modification in the upload program to open in change and set the document status one by one means opened in change make the status Work Request and save than again open in change set the status In Work then again and so on .... unless the status will become released.
    or
    In customization  set the status directly to released at first step.
    Regards,
    EJ

  • Issue in PO creation for Direct Material Procurement.

    Hi Experts,
    I am working with SRM 7.0 Classic Scenario.
    I have no issues with SC creation for indirect materials with Account Assignment.
    But when I select Order as Direct material in SC for any material with out account assignment on Approval of SC PO is created in SRM system as Extendended Classic Scenario even though I have not activated Extended classic scenario.
    Kindly help me out in this issue how can I order as DIRECT MATERIAL WITH Classic scenario.
    Regards,
    B.N.Karthikeyan.

    karthi
    it is standard behavior,
    but you can do one thing .
    BBP_CREATE_BE_PO_NEW  BADI - TRY . CLEAR THE ACCOUNT ASSIGNMENT .Thats all . check it up with technical resoucre.
    but you have to decide by developemnt what are the materials are PO with account / without account assignment
    br
    muthu

  • SRM 7.0 PCW. Follow-on document creation

    Dear experts: we are in SRM 7.0 and have implemented PCW with approval at item level. Our end users want to have automatic follow-on document creation inmediatlly after SC item approval. However, as per standard SAP SRM, they have to wait untill all levels for all items have been approved.
    One example will illustrate: A shopping cart with two items. Due to the threshold, item1 requires only one level of approval, while item2 requires two levels. Both items will result in a dfferent purchaisng document in the backend system in a classic scenario: Item1 will result in a PReq, while item2 will result in a Purchase Order.
    Once first level for the two items have been approved, would it be possible to generate the follow-on document for the first item as no further approval for this item is needed is needed?
    Our end users are familiar with Preqs in MM, where item approval process is done at item level and the follow-on document can be created even when the other items in the PReq are not yet approved.
    Thanks in advance for your valuable  help.
    Regards
    Valentí

    Hi,
       No, this is not possible, once all the item in a SC approved, then only system will create a follow-on-documents. As per your scenario , item1 will still wait until item2 gets approved. This is standard.
    Saravanan

  • ECC document creation timing  for mismatch values in ECC and Bw report.

    hi gurus,
    i am extracting data from ECC at 10.pm (ist) and my process chain should start to load data at 2.30 am (ist) then in morning  i am refreshing BW report try to reconcilied from my extracted ECC but i am finding so many mismatsh values. so i want to know that record (document creation time )from BW refresh is after or before Process chain start or after ECC extraction,if this case record posted after ECC so that its showing me mismatch in BW and it will populate in ECC on next day.please tell me step to freeze on which record  come to me on next.
    i hope u undarstand my prob.
    Many thanks
    Ganesh

    got it.

  • Document creation date DMS

    Hi Folks,
    How do I find out the creation date of a DMS document (CV01N)? Document info structure table DRAW does not have it. I could not find it in any table of CV package.
    /Sagar

    DRAP helped. First entry in DRAP has document creation date.

  • How to use Add Shipments functionality in Shipment document creation

    Dear All,
    We wanted to use the Add Shipments functionality in the Shipment document creation / change.
    We have two different shipment types.
    I want to add shipments of one shipment type in to Shipment document of anohter shipment type.
    I am not able to do it now as system is saying in the selection log that the shipment types are not same.
    Please let me know what are the pre requisite configurations to enable us to add shipments in to another shipment.
    Please let me tknow he standard functionality of "Add Shipments option" and how to use it to add shipments in a Shipment
    Regards
    Venkat

    Hi Venkat,
    The option "find shipments" is provided to select the shipments to reassign or deassign the deiveries etc in VT01n or VT02n
    transaction planning screen. Basically you can play around to assign and reassign the deliveries to different shipments
    This option is not creating the shipment within shipment. It is just selection of shipments for planning purposes
    Hope this helps.
    Regards,
    Ramana

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Office document creation capabilities of Acrobat XI Pro same as in Acrobat Plus?

    Are the Office document creation capabilities of Acrobat XI Pro the same as the capabilities in Acrobat Plus? Thank you.

    They are the same appllication as far as the Acrobat 11 part that they both include. Acrobat Plus includes the Export PDF service, which should do the same thing that Acrobat can as far as exporting to Office document formats, but it's different software.

Maybe you are looking for