Issue in Flat File load through FTP set up

Hi All,
I am trying to load the flat file using FTP set up ( through process chain ).
I put a file in the FTP server, the file is being picked up from the FTP server but I cannt see the same in Interface file manager (ZIFM) under unfinished or comleted jobs.
I am not able to understand where is the eror?
any suggestion for this would be of great help.
regards
Amol
Edited by: Amol Jaiswal on Nov 8, 2008 12:33 PM

i don't get you.
You are trying to FTP a file to your application server in your process chain; is that correct?
Marco

Similar Messages

Issue with flat file loading timing out

Hello
I have a scenario, where I am loading a flat file with 65k records into a cube. The problem is, in the loading process, I have to look up the 0Material table which has a million records.
I do have an internal table in the program, where I select a subset of the Material table ie around 20k to 30k records. But my extraction process takes more than 1 1/2 hrs and is failing (timed out).
How can i address this issue? I tried building indexes on the Material table and its not helping.
Thanks,
Srinivas.

Unfortunately, this is BW 3.5, so there is no END routine option here. And I tried both .csv and notepad file methods, and both are creating problems for us.
This is the total code, do you guyz see any potential issues:
Start Routine (main code)
refresh i_oldmats.
refresh ZI_MATL.
data: wa_datapak type transfer_structure.
loop at datapak into wa_datapak. (** I collect all the old material numbers from my flat file into an internal table i_oldmats**)
   i_oldmats-/BIC/ZZOLDMATL = wa_datapak-/BIC/ZZOLDMATL.
   collect i_oldmats.
endloop.
sort i_oldmats.
SELECT /BIC/ZZOLDMATL MATERIAL (** ZI_MATL only has recs. where old materials exist, this gets about 300k records out of 1M**)
         FROM /BI0/PMATERIAL
         INTO ZI_MATL FOR ALL
         ENTRIES in i_oldmats WHERE
          /BIC/ZZOLDMATL = i_oldmats-/BIC/ZZOLDMATL .
            collect    ZI_MATL.
Endselect.
Sort ZI_MATL.
Transfer rule routine (main code)
IF TRAN_STRUCTURE-MATERIAL = 'NA'.
    READ TABLE ZI_MATL INTO ZW_MATL
    WITH KEY /BIC/ZZOLDMATL = TRAN_STRUCTURE-/BIC/ZZOLDMATL
    BINARY SEARCH.
    IF SY-SUBRC = 0.
      RESULT = ZW_MATL-MATERIAL.
    ENDIF.
ELSE.
    RESULT = TRAN_STRUCTURE-MATERIAL.
ENDIF.
Regards,
Srinivas.

Issue with flat file load

Hello,
I am trying to load data via flat file. we have entries in a field which starts with 0s are skipped when we load in CSV format.
like i have an entry 00657, is being loaded as 657 .
How can i prevent this?
Thanks.
Praveen

Hi Praveen,
It is of lenghth 5. but when i upload CSV file it is not considering 00 infront. But i want those. I am loading hierarchy from flatfile.
Suggest me, if we can also load from text ?.
Thanks.
Praveen

Flat file load through Integrated planning

Hi Expert,
Could any one help me in finding a K9*.BIR

Hello friend,
I used the How to... and work OK.
I can send to you the K900516.BIR
I have the instalation SAP NetWeaver 2004s in my system with these nivel of support package in the system:
SAP_ABA     700                           0016     SAPKA70016     Componente multiaplicaciones
SAP_BASIS 700                     0016     SAPKB70016     Sistema Base SAP
ST-PI     2008_1_700     0000          -     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0016     SAPKIPYJ7G     PI_BASIS 2005_1_700
SAP_BW     700                 0018     SAPKW70018     SAP NetWeaver BI 7.0
and this could be the razon for you have problems with the import.
Marc Bernard saw that is necesary the SP 0013
Saludos
Im not a expert, only this solution works fine to me.

Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Hi experts,
When loading through flat file in BI 7.0 for Info Package Level Initialization Delta Process with data Transfer is coming by default,but when i want to select Initialization Delta Process without Data transfer is disabled. (in the creation of Data Source (flat file) in the Extraction Tab Delta Process is changed to FIL1 Delta Data (Delta Images).
please provide me Solution.
regards
Subba reddy.

Hi Shubha,
For flat file load please go throught he following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
This will help.
Regards,
Mahesh

Transformation not generating-Flat file loading

Hello guys, I hope you can help me with this little confusion I have on BI7 Flat file loading.
I got a File (CSV) on my workstation. I am trying to load Master Data. Here is the example of my file and issues:
Lets say, I have CSV file named "CarModel.CSV" on my PC.
This excel file has 10 Records and No atributes for this Field.
So the records should show like this and it is showing correctly in PSA level, DS level.
A
B
C
D
E
F
My goal is to load Flat file data to InfoObject (inserted in Infoprovider)
I created Source system, DS, all thats stuffs.
I am now on Display DS screen under Proposal Tab. I am putting 10 Records to show and hitting Load example data....it works fine by showing all 10 records. However in the bottom part of this screen, what should show as a Field ?In my case , First it was showing the First Record ("A")...i didnt think it was correct but i prceeded anyways. Transformation could not be generated.
I tried by deleting "1" from the field "No. of header rows to be ignored" and its the same result ..No transformations.. I mean i know its very simple to load this data but i am not sure what i am doing wrong..My question is:
1) What should show under Field/propasal tab in my case?am i supposed to create this Field?
2) Should the system to propse the field which is from my flat file header ?in my case i dont have any header..should i have include header in my csv file like "car model"? i am confused please give me some info thanks
dk

Hi,
In filed tab, u have to enter ur infoobject names in an order...and press enter it'll automatically give the description and its other factors...
i guess u shuld have some header in the sense eg: customer,cust ID like this..this only u have to enter as fields...in proposal tab...try that
rgds,

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Issue importing flat files into SQL server 2008R2

I have csv files that the last column may not have data. SSIS (version 2008R2) will insert the next row's data into the empty cells, which causes my package to fail.
I know this is resolved in 2012 but we are using 2008R2 still. Any suggestions?
Thanks.

Hi sqlBI2014,
After testing the issue that Flat File Connection Manager cannot handle file with uneven number of columns in each row in my SQL Server 2008 R2 environment, I can reproduce it.
Based on my research, the issue is caused by the Column Delimiter gets first preference and then Row delimiter. So the next row data would be inserted in the empty column cell. This is by design in SQL Server 2005, SQL Server 2008 or SQL Server 2008 R2.
Good news is that the issue is fixed in SQL Server Data Tools which comes with SQL Server 2012. In SQL Server 2012, by default, the Flat File Connection Manager always checks for a row delimiter in unquoted data, and starts a new row when a row delimiter
is found. This enables the connection manager to correctly parse files with rows that are missing column fields.
If you still want to fix the issue in SQL Server 2008 R2, there is a sample component posted to the CodePlex that might help you with this:
http://ssisdfs.codeplex.com/
References:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2013/03/13/flat-file-source-cannot-handle-file-with-uneven-number-of-columns-in-each-row.aspx
https://connect.microsoft.com/SQLServer/feedback/details/293193/ssis-import-of-flat-file-with-uneven-number-of-columns
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Best practise around handling time dependency for flat file loads

Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.

Bump!

Unit Code, Commercial Code - Flat File loading vs BPS Loading

Hi SDN Community,
Recently, we have moved our flat file loading to be performed by BPS interfaces.
During flat file loads, the Commercial code of all units of measures, are verified.
eg.DAY
But when loaded by BPS, the UNIT code is verified.
eg. TAG.
In the display of the BPS upload, it displays DAY which is the commercial code.
The only thing, is the customer is forced to use TAG in the BPS upload files.
They wish to create another record in the transaction
CUNI to be
Unit code = DAY
Commercial code = DAY.
However, i have found that we cannot allocate the same commercial code to another unit code.
Is this a design constraint, or a process error that i am doing.
Thank you.
Simon

04.01.2010 - 02:22:53 CET - Reply by SAP
Dear customer,
As i do not fully understand how this works, but the base table T006A
has 2 entries, 1 for english, 1 for German, should it not be that the
English EN entry field be working rather that the German DE, hence DAY
should be used? Can you please confirm my understanding on this?
>>> If you check my attachment "SE16.xls", you can see that it's for
language >>English<<, and the internal format is TAG while the external
format is DAY.
- Are there any plans to modify the BPS functionality in newer SAP BW
versions to allow the customer to indicate the same UOM as per flat
file laods? Or is an upgraded Support Pack that allows this?
- If not, would it be possible to make any customer enhancements to
allow this to take place depending on customer requirements.
>>> There is no plan at this moment to change this BPS functionality
in newer SAP BW versions or support packages.
We really recommend you to use internal format TAG in the upload file
in BPS which I think should be acceptable and feasible to you. All
other ways trying to use external format is risky and we cannot assure
you that it will work well as it's not SAP standard function. (I think
it's not worth the risk as the standard function which requires
internal format should not be too unacceptable)
Thanks for your understanding.
I also don't think my BC-SRV-ASF-UOM colleague would be able to help
you a lot regarding this.
Best Regards,
Patricia Yang
Support Consultant - Netweaver BW
Global Support Center China
SAP Active Global Support

Flat File Load Issue - Cannot convert character sets for one or more charac

We have recently upgraded our production BW system to SPS 17 (BW SP19)
and we have issues loading flat files (contain Chinese, Japanese and
Korean characters) which worked fine before the upgrade. The Asian
languages appear as invalid characters (garbled) as we can see in PSA. The Character Set
Settings was previously set as Default Setting and it worked fine until
the upgrade abd we referred to note 1130965 and with the code page 1100
the load went through (without the Cannot convert character sets for one or more characters error) however the Asian language characters will appear
as invalid characters. We tried all the code pages suggested in the note e.g.
4102, 4103 etc on the info packages but it did not work. Note that the
flat files are encoded in UTF-8.

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Flat File Load- issue

Hi All,
I am facing a problem while doing a deta load through Flat File; it's an .csv file.
Problem arises whne I have some records like this £1,910.00 ; it's creating a separate column.
I am having lot's of such amount field.
is there any breakthrough for this issue ?? Your ans would be highly appriciated.
Regards,
Kironmoy Banerjee

Hi,
As satish has mentioned it is better to maintain two seperate columns as below
1.0currency
    GBP
2.0amount
    1910
(GBP )Indicates British Pound.
When ur maintaining amount as 1,910.00 it will go for next column because in info package Extraction tabe Data Separator will be , (Comma).
Regards
Surendra
Edited by: vaade surendra on May 7, 2010 11:37 AM
Edited by: vaade surendra on May 7, 2010 11:37 AM
Edited by: vaade surendra on May 7, 2010 11:38 AM
Edited by: vaade surendra on May 7, 2010 11:41 AM

.csv flat file loading data issue

Environment: SQL Server 2008 R2
Purpose: Load source data which are stored in a csv file to the destination table
Problem: After setting up flat file transformation, including the columns in the output alias, see the following picture:
,because SSIS set datatype to 50 char while the length is 65. I also set up response string filed to 100 in the destination table, An error message showed as the following picture
What I could do differently to overcome this issue. please advise

There are a number of them but not associated with that field
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
1. [Flat File Source [511]] Error: Data conversion failed. The data conversion for column "Version_cd" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
2. [Flat File Source [511]] Error: The "output column "Version_cd" (604)" failed because truncation occurred, and the truncation row disposition on "output column "Version_cd" (604)" specifies failure on truncation.
A truncation error occurred on the specified object of the specified component.
3. [Flat File Source [511]] Error: An error occurred while processing file "C:\Users\data\ETL files\dummydata.csv" on data row 2.
4. [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (511) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
5. Task Data Flow Task failed

Urgent: Flat file load issue

Hi Guru's,
Doing loading in data target ODS via flat file, problem is that flat files shows date field values correct of 8 characters but when we do preview it shows 7 characters and loading is not going through.
Anyone knows where the problem is why in the preview screen it shows 7 characters of date when flat file has 8 characters.
Thanks
MK

Hi Bhanu,
How do i check if conversion is specified or not and another thing is it is not just one field we have 6 date fields and all of them are showing 7 characters in PSA after loading where as flat file have 8 characters in all of the 6 date fields.
In PSA I checked the error message it shows 2 error messages:
First Error message:
The value '1# ' from field /BIC/ZACTDAYS is not convertible into the
DDIC data type QUAN of the InfoObject in data record 7 . The field
content could not be transferred into the communication structure
format.
em Response
The data to be loaded has a data error or field /BIC/ZACTDAYS in the
transfer structure is not mapped to a suitable InfoObject.
The conversion of the transfer structure to the communication structure
was terminated. The processing of data records with errors was continued
in accordance with the settings in error handling for the InfoPackage
(tab page: Update Parameters).
Check the data conformity of your data source in the source system.
On the 'Assignment IOBJ - Field' tab page in the transfer rules, check
the InfoObject-field assignment for transfer-structure field
/BIC/ZACTDAYS .
If the data was temporarily saved in the PSA, you can also check the
received data for consistency in the PSA.
If the data is available and is correct in the source system and in the
PSA, you can activate debugging in the transfer rules by using update
simulation on the Detail   tab page in the monitor. This enables you to
perform an error analysis for the transfer rules. You need experience of
ABAP to do this.
2nd Error Message:
Diagnosis
The transfer program attempted to execute an invalid arithmetic
    operation.
System Response
Processing was terminated, and indicated as incorrect. You can carry out
    the update again any time you choose.
Procedure
1. Check that the data is accurate.
-   In particular, check that the data types, and lengths of the
            transferred data, agree with the definitions of the InfoSource,
            and that fixed values and routines defined in the transfer rules
-   The error may have arisen because you didn't specify the
         existing headers.
2. If necessary, correct the data error and start processing again.
Thanks
MK

Issue in Flat File load through FTP set up

Similar Messages

Maybe you are looking for