Issue in IDOC-File Scenario

Hallo Everybody,
In one of the requirements,for the interface design which involves IDOC-FILE scenario we have a req as:-
Multiple IDOCs would be sent from SAP R/3 to SAP XI. Each IDOC can have 0-4 segments and for each segment a file needs to created.
The files needs to be FTPed to a location, only if all the IDOCs have been processed successfully.
Requirement:
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
2) We need to send a notification from XI, in case any IDOC processing fails.
3) How do we check in XI, if all the IDOCs have been processed successfully.
Please suggest me with some good stategies to resolve this issue.
Appreciations and Rewards in line.
Regards,
Younus

Hi
Are you planning to use BPM as it suits your requirement.
To collect the idocs in small bunches refer
Collecting IDocs without using BPM
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
BPM will allow you to wait for the time all IDOC are processed
2) We need to send a notification from XI, in case any IDOC processing fails.
BPM exception handling will allow this functionality even to the exact field you want to send notification
3) How do we check in XI, if all the IDOCs have been processed successfully.
Set Acknowledgment for IDOC's
refer
Posting multiple IDocs with Acknowledgement
Thanks
Gaurav

Similar Messages

Production Time Issues on IDOC---File Scenario

Hi All,
We have done all the IDOC--File scenarios Successfully in DEV System.
Now its time to Production and Go-Live.
Q1) Assume If Bulk messages are Failed in RWB-----Receiver CC Due to some error, Then how to Handle these Error messages
Regards
Suman

Hi Mahesh,
This is My Trace File
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: 116866</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPPIS</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 700</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 700</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA07</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
</Trace>
<Trace level="2" type="T">party-scheme: ALE#KU</Trace>
<Trace level="1" type="T">party normalization error: scheme = ALE#KU</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:15:27Z INDIA</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start with given receiver C086 -</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_Soap_Service_Qty MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO0___0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping C5523ABE7D9A35BDABE2082468D67E41</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 1FB1D8C0010B11DD9AB1F535AC101018</Trace>
<Trace level="1" type="T">Interface Mapping http://sub-sapretail-pos.com/Itemmaster IM_POS_Itemmaster_OB</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_ completed. (executeStep() of com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU )</Trace>
<Trace level="1" type="T">ContentType application/xml</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-Subhiksha_PIS_subprd1</Trace>
<Trace level="2" type="T">-BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">http://sub-sapretail-pos.com/Itemmaster.MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Channel found: - BS_Soap_Service_Qty - CC_POS_Itemmaster_OB_Qty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: SOAP</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: SOAP</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://psxprd:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Regards
Suman

IDoc- File scenario: can you explain thses acknowledgments?

Hi,
I have an idoc->file scenario. in sxmb_moni I can see a green "OK" mark for my message in acknowldgment status column. when I dblclick the message, I can see my original message and 2 acknowldgment messages under this one in the top left.
1 acknowledgement is the OK one, the 2nd one is of type AckNotSupported.
When I dlbclick the OK one ack and click the idocoutbound, I can see:
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>450</SAP:MANDT>
<SAP:DOCREL>700</SAP:DOCREL>
<SAP:DOCNUM>0000000000257842</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ALEAUD</SAP:MESTYP>
and when I dblclick the 2nd ack and IdocOutbound, I see:
<SAP:MANDT>450</SAP:MANDT>
<SAP:DOCREL>700</SAP:DOCREL>
<SAP:DOCNUM>0000000000257862</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ALEAUD</SAP:MESTYP>
<SAP:MESCOD />
450 is the client of my IE, not the sender SAP system.
What should all this mean? What does each ack mean and why do I get 2 of them?
When I check the Idoc no. in XI, there is no such IDoc. Where are these Idocs sent from?
POINTS WILL BE ASSIGN FOR SURE FOR CORRECT ANSWER.
Thanks, Olian

green:
hoplist
<?xml version="1.0" encoding="UTF-8"?>

<SAP:HopList SOAP:mustUnderstand="1" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
 <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
 <SAP:Engine type="IS"/>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">IDOC</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info>ARTMAS.0000000000026370:20080610211506</SAP:Info>
 </SAP:Hop>
 <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
 <SAP:Engine type="IS">is.12.shlxiqcis1</SAP:Engine>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info>3.0</SAP:Info>
 </SAP:Hop>
 <SAP:Hop timeStamp="2008-06-10T21:15:13Z" wasRead="true">
 <SAP:Engine type="AE">af.xiq.shlr3qdbs3</SAP:Engine>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info/>
 </SAP:Hop>
</SAP:HopList>
content
<?xml version="1.0" encoding="UTF-8"?>

<SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
 <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
 <SAP:MANDT>350</SAP:MANDT>
 <SAP:DOCREL>700</SAP:DOCREL>
 <SAP:DOCNUM>0000000000258080</SAP:DOCNUM>
 <SAP:DIRECT>2</SAP:DIRECT>
 <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
 <SAP:CIMTYP/>
 <SAP:MESTYP>ALEAUD</SAP:MESTYP>
 <SAP:MESCOD/>
 <SAP:MESFCT/>
 <SAP:SNDPOR>SAPXIQ</SAP:SNDPOR>
 <SAP:SNDPRN>SHLSYSQAS</SAP:SNDPRN>
 <SAP:SNDPRT>LS</SAP:SNDPRT>
 <SAP:SNDPFC/>
 <SAP:RCVPOR>SAPR3Q</SAP:RCVPOR>
 <SAP:RCVPRN>R3QCLNT330</SAP:RCVPRN>
 <SAP:RCVPRT>LS</SAP:RCVPRT>
 <SAP:RCVPFC/>
 <SAP:TEST/>
 <SAP:SERIAL/>
 <SAP:EXPRSS/>
 <SAP:STD/>
 <SAP:STDVRS/>
 <SAP:STATUS>03</SAP:STATUS>
 <SAP:OUTMOD/>
 <SAP:SNDSAD/>
 <SAP:SNDLAD/>
 <SAP:RCVSAD/>
 <SAP:RCVLAD/>
 <SAP:STDMES/>
 <SAP:REFINT/>
 <SAP:REFGRP/>
 <SAP:REFMES/>
 <SAP:CREDAT>0000-00-00</SAP:CREDAT>
 <SAP:CRETIM>00:00:00</SAP:CRETIM>
 <SAP:ARCKEY/>
</SAP:IDocOutbound>
Red one:
<?xml version="1.0" encoding="UTF-8"?>

<SAP:HopList SOAP:mustUnderstand="1" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
 <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
 <SAP:Engine type="IS"/>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">IDOC</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info>ARTMAS.0000000000026370:20080610211506</SAP:Info>
 </SAP:Hop>
 <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
 <SAP:Engine type="IS">is.12.shlxiqcis1</SAP:Engine>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info>3.0</SAP:Info>
 </SAP:Hop>
 <SAP:Hop timeStamp="2008-06-10T21:15:13Z" wasRead="true">
 <SAP:Engine type="AE">af.xiq.shlr3qdbs3</SAP:Engine>
 <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
 <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
 <SAP:Info/>
 </SAP:Hop>
</SAP:HopList>
content
<?xml version="1.0" encoding="UTF-8"?>

<SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
 <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
 <SAP:MANDT>350</SAP:MANDT>
 <SAP:DOCREL>700</SAP:DOCREL>
 <SAP:DOCNUM>0000000000258083</SAP:DOCNUM>
 <SAP:DIRECT>2</SAP:DIRECT>
 <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
 <SAP:CIMTYP/>
 <SAP:MESTYP>ALEAUD</SAP:MESTYP>
 <SAP:MESCOD/>
 <SAP:MESFCT/>
 <SAP:SNDPOR>SAPXIQ</SAP:SNDPOR>
 <SAP:SNDPRN>SHLSYSQAS</SAP:SNDPRN>
 <SAP:SNDPRT>LS</SAP:SNDPRT>
 <SAP:SNDPFC/>
 <SAP:RCVPOR>SAPR3Q</SAP:RCVPOR>
 <SAP:RCVPRN>R3QCLNT330</SAP:RCVPRN>
 <SAP:RCVPRT>LS</SAP:RCVPRT>
 <SAP:RCVPFC/>
 <SAP:TEST/>
 <SAP:SERIAL/>
 <SAP:EXPRSS/>
 <SAP:STD/>
 <SAP:STDVRS/>
 <SAP:STATUS>03</SAP:STATUS>
 <SAP:OUTMOD/>
 <SAP:SNDSAD/>
 <SAP:SNDLAD/>
 <SAP:RCVSAD/>
 <SAP:RCVLAD/>
 <SAP:STDMES/>
 <SAP:REFINT/>
 <SAP:REFGRP/>
 <SAP:REFMES/>
 <SAP:CREDAT>0000-00-00</SAP:CREDAT>
 <SAP:CRETIM>00:00:00</SAP:CRETIM>
 <SAP:ARCKEY/>
</SAP:IDocOutbound>

Help with idoc-file scenario

Hello,
I am doing IDOC - File scenario.
(source is DEBMAS and reciever end, there is flat DT with no heirarchies as of now. )
The requirement is that if the segment at the source side has multiple lines of " sold to party " values, then customer bill should also have multiple lines with account number different for each line. Can I acheive this using "split by value"? if yes please help me.
Regards,
Haritha

Use the sold-to-party node to create the row node of the file...if some of the elements in the sold to party node have to duplicated/repeated use the one as many function.

Mapping issue from Invoice (Idoc - file) scenario

Dear All,
I am working on Idoc to File scenario and i have a requirement like..
INVOICE02
   E1EDP01
        E1EDP05
              BETRG
        E1EDP05
              KSCHL
              BETRG    etc
condition :
If KSCHL not equals to space then map all BETRG's to a target field which is not mandatory.            Sometimes E1EDP05 may not contain KSCHL and when i set the context to E1EDP05 level its not considering the BETRG values, it behaving lik taking up the condition part and summing part seperately.
It would be really great if anybody comes up with some ideas.
Thanks a lot
Hari

KSCHL ----> exists
                                             -----------------------> And ------->ifWithoutElse -------------> Target
KSCHL                                                                            Then(BETRG)
                 -------> equalS ---> Not
Constant(blank)
Context of KSCHL should be above that of E1EDP05
I hope that Target node is repeating -
0...unbounded.
Regards,
Abhishek.

How to use a existing Business Service in IDoc-File Scenario

Hi Experts,
I am new to XI.
I am working on a IDoc to File scenario where in i am importing the CREMAS.CREMAS03 IDoc from the R/3 System.
When i try to create a Business Service in Configuration Scenario Object in Integartion Directory, i get a message saying "SAP system ID ER1 and client 800 already exist in service | CLNT800ER1".
Can i reuse this Business Servie in my Configuration Object?
If yes, can you please guide me How to go about it?
Thanks for the effort.
Cheers
Gaurav Raghav

U may directly use it.
Just select the business service wherever required. It is not necessary that the Business Service is present in ur configuration scenario. But if u still want it, u may add it using "Add to Scenario" option from other configuration scenario or from Objects tab
Regards,
Prateek

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

IDoc output type not getting configured in IDoc-File scenario

Hello
I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
1] Created output type
2] Created partner function as EDI LS for this output type
3] Configured RSNASTED as Processing Routines for output type
4] Included this output type in the Header output procedure
5] Configured XI system as the partner in partner profile with appropriate Message control
Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
I checked in SPRO but could not find such flag.
Does anyone had came across such output type configuration.
Thanks in advance.
I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
Regards
Rajeev

Hi,
Please check the following
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Copy NEU to ZNEU or YNEU
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
G.Ganesh Kumar

Idoc- File scenario: Read a data field in IDOC and name the file with it

Hi All,
I am configuring an IDOC to File scenario.
I have a requirement where I need to read one of the IDOC data field and use that as the name of the File.
E.g: If the IDOC data field-1 = '123456', then I need to name the output file as '123456'.
Is it possible to do this. Appreciate your help on same.
Thanks
Shirin

Try this code..
desired field from IDoc will be input parameter to UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key,a); // a is input parameter
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also, check Adapter specific message attributes in file adapter, check filename

IDoc - File Scenario

Dear SDN,
We have to develop something like this:
An IDoc is generated from an ABAP Business System. Using content based routing conditions the IDoc must be sent to different FTP servers. The problem is that the IDoc must be written in its "native plain" format, not in XML format.
Any ideas?

hi Gustavo,
2 ways
1. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
2. send the idoc from R3 in native IDOC (file port) and just tranport it via XI
both ways will produce native IDOC:)
for file ports you can check out my book
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Segment filtering in IDoc -File scenario

Hello
I am currently working on IDoc to File scenario where I am distributing changes in materials to legacy systems. For the same I am using MATMAS IDoc and planning to use change pointers to track the changes of the same.
The scenario is working fine but from fine-tuning perspective can i filter some of the segments from IDoc because I am hardly using few data from MATMAS IDoc.I checked the distribution model in R3 but i guess it allows us to define data filters.
Thanks in advance.
Regards
Rajeev

hi,
thanks for the reply but i found one transaction in SAP BD56 where I guess we can specify segments to be filtered.
Regards
Rajeev

Problem in SOAP to IDOC & File scenario

Hi,
My scenario is SOAP ->IDOC and FILE,when I run the scenario IDOc was processed and File was not created at the target system.I maintained LS name for sender SOAP and IDOC business service.Nothing was maintained in adapter spec identifiers for Recer business service(i.e For target File CC).This was working fine in Dev.After Importing another scenario which uses same business service,this didnt stp working?
what could be the reason?
Thanks,
RP
Edited by: RP@261 on Oct 21, 2008 10:59 PM

> my imported scenario and existing scenario in QA using same sender business service.After importing the other scenario,existing scenario is failed to create files at target system even though it shows successful in MONI.
>
Check the target dir permission once again from your BASIS team. Reconfirm the the target dir name in receiver CC also.
> Should we maintain Logical system in adapter specific identifiers for Recr File CC also??? I create a file in BI application server from recr File CC.
>
No, for creating a file you don't require this. This is required only in case of IDOC.
> my scenario is
> (SOAP sender) --> TO IDOC & FILE ..i maintained LS name in sender BS where SOAP CC is created and also at Recr BS where IDoc CC is created. The other Recr BS for File where I didn't.IS it required ?
>
For File recever BS, No need.

DESADV.DELVRY 03(IDOC) - File Scenario .Issue with Mapping

Hi All,
we have used DESADV.DELVRY 03 as Source. we need to generate an XML file.
Condition : we have segment :u2022E1ADRM1 : Central Address Segment Group, Main .this is Unbounded (0 ...99)
The Segments has field: PARTNER_Q . The IDOC can have PARTNER_Q(Qualifier) as -> WE, SP, OSO.
The condition is if PARTNER_Q =WE , then the data of SHIP TO PARTy should be transfered to file
Same time, If Partner_Q =AG , Data of Sold to Party " should be transfered.
Note :1.I DOC generated can have PARTNER_Q= SP, AG , OSP , ZM etc.
2. The adress are unique . Sold to Praty id , Sales ORG address are not same .. its different.
I have develeoped interface with Ship to party , sold to party , sales org fields , but I am little confused how to match all fields of Qualifier : SP, WE, OSP a once to -> file.
I can't duplicate segment: E1ADRM1 structure as it is Source
Please provide your input .
Edited by: Varalakshmi SB on Jan 14, 2011 1:27 PM
Edited by: Varalakshmi SB on Jan 14, 2011 1:29 PM

Hi,
this kind of conditions will be common during handling of idoc structures...
All you need to do handle the context of the segment E1ADRM1 to the parent node..so that data of all qualifiers will be in single context and checks for the condition you provide
i.e if E1EDRM1/PARTNER-Q Equals WE then pass the target value to the target field..
if you like to gain confidence of your mapping once mapping is done put some test data and right click your mapping conditions and click queue to see the output and how the values are passed to the conditions..
HTH
Rajesh

IBAN issue in Idoc file

Hello All - Our CoCd is based in Belgium, and we have Idoc payment process. Recently Our payment files are getting rejected as IBAN of Beneficiary is not populated in Field FIIKONTO.
Last month, when we processed Payment to Brussels Vendor, IBAN was populated in that field and when we are making payment to the same Vendor now, Bank account number is populated. Due to this, Payment is failed by HSBC.
We have not done any changes either Config or Master data level.
Can you please give me a little idea on how to investigate this issue.
Thanks

Hi Hoysala SAP,
Are you using programm RFFOEDI1 to create the IDOCs?
If so, please check in the variant used, if in Output control the checkbox 'Trasfer IBAN' is selected.
Regards,
Emöke

Problem with Idoc-file scenario

Hi Sdn
In my scenario I am sending data from R/3 using Idoc.I am using Change Pointer in SAP side. My receiver adapter is File adapter, generating a .CSV file.
Now whenever there is ny change in the data in SAP side, Idoc will get triggered and data will come to XI and file will get generated. Now the requirement is, the file shud contain only the changed data with header ,other fields shoud be blank and comma-separated. I don't have ny receiver file structure.
my questions:
1. How much helpful is 'file content conversion' in this case??
2. if mapping is required, how can we do the mapping??
3. Is there any standard mapping function, so that we can check every field with condition and then map them (1:1)?
plz help me.
Thanx in advance.

> Hi Sdn
>
> In my scenario I am sending data from R/3 using
> Idoc.I am using Change Pointer in SAP side. My
> receiver adapter is File adapter, generating a .CSV
> file.
> Now whenever there is ny change in the data in SAP
> side, Idoc will get triggered and data will come to
> XI and file will get generated. Now the requirement
> is, the file shud contain only the changed data with
> header ,other fields shoud be blank and
> comma-separated. I don't have ny receiver file
> structure.
>
> my questions:
>
> 1. How much helpful is 'file content conversion' in
> this case??
You have to use it in order to convert to csv
> 2. if mapping is required, how can we do the
> mapping??
in message mapping
> 3. Is there any standard mapping function, so that we
> can check every field with condition and then map
> them (1:1)?
you can use 'if' or ifWithoutElse to check the condition
> plz help me.
> Thanx in advance.

Issue in IDOC-File Scenario

Similar Messages

Maybe you are looking for