Issue in installing JDK 1.6

Hi experts !
i am trying to install JDK 1.6 on x86 64 bit machine with RHEL 5.4 however, when i run the bin file using "./" command from root user, i get following error :-
[root@oim2 setups]# ./jdk-6u24-linux-x64.bin
Unpacking...
Checksumming...
Extracting...
./jdk-6u24-linux-x64.bin: line 113: ./install.sfx.5234: cannot execute binary file
Failed to extract the files. Please refer to the Troubleshooting section of
the Installation Instructions on the download page for more information.
i have downloaded file again to ensure that file is not corrupt but in vain.
system specs are as under :
[root@oim2 setups]# uname -a
Linux oim2.af 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:12 EDT 2008 i686 i686 i386 GNU/Linux
plz help me out here
regards

Please don't crosspost.
I'm locking this thread now

Similar Messages

Issue in installing Jdk 1.6 update 3

Hi,
I am installing jdk 1.6 with update 3. However it seems that javac.exe is not present in the bin folder.
Let me know how to solve this issue.
Thanks!

Zia wrote:
but my OS is 64 bit as "uname -a" command shows.No ...
i686 i686 i386... these are part of the x86 family, which is 32-bit.

Issue while installing ODI 11.1.1.6 with JDK 7u

Hi All,
I am working on installing ODI on windows 64 bit. I downloaded lastest web logic server files, ODI files and JDK files from oracle site..
I installed Web Logice server with no errors but when I tried to install ODI by running the setup.exe it was giving me an error:
"Error: Provide the JDK/JRE Location while launching the installer. Invoke the sertup.exe with -jreLoc <JDK/JRE Location absolute path>Parameter(s)".
So, I looked in to JDK file and noticed that it is an old file and need to be updated so I installed "jdk-7uf-windows-i586.exe". After installing when I try to setup ODI, I am still getting the same error..
It is asking me to provide the location but I am not srue where to provide the location.. I know the location for JDK i.e. C:\Program files\Java\jdk1.7.0_04 but I am not sure where to provide this location for ODI..
Thanks a lot!

2 things must be noticed:
First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
I did over 20 windows installations using these settings, it'll work perfectly.
Regards.
Luiz Araujo

Issue while installing NWDW 7.0 on Windows Vista

Hi all,
    Please give me your inputs in resolving my issue.
     I am trying to install NWDW 7.0 on windows vista machine(32 bit) and the installation stuck at the phase "Import Java dump". It's in the same phase from yesterday and couldnt proceed further/ throwing any error.
I have installed JDK 1.4.2_13 and using MAX DB version as "50095979_3   NW 7.0 Presentation - MaxDB Release 7.6.03 " from market place.
I have my time zone as GMT + 1.00 .
I 've referred few posts but couldnt figure out the solution.
Any pointers are highly appreciated.
Regards,
Sandeep.

Hi Senthil,
I've checked sapinst_dev.log file and couldnt find any error/ inconsistencies ecept the following oen which ended up incompletely.
    TRACE      2009-11-05 06:47:54.673 [synxcfile.cpp:339]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/IMPORT.XML to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB
INFO       2009-11-05 06:47:54.693 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/I
I couldnt find dev_server0.log and dev_w0.log files .

Issues while Installing SOA 11g in windows 8

Hi Experts,
I am trying to install SOA Suite to my laptop which have windows 8. Data base and RCU and Weblogic everything is completed successfully with out any issues.
I have used oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32 for weblogic . When i am trying to run the G:\SOA_Software_Downloads\SOA_11g_64bit\unzip\ofm_soa_generic_11.1.1.7.01 of2\Disk1>setup -jreLoc C:\Oracle\Middleware\SOASuite11gR1PS6\jdk160_29, i am getting issue like on Prerequisite Checks 3 of 8 step is giving Checking operating system certification and Checking service pack status are in red with cross symbol but Checking physical memory status is checked.
I try to install generic weblogic as well wls1036_generic, which is giving error like The Java Run Time Environment was not found at C:\Program\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run. Please visit heep://www.javasoft.com and install JRE version 1.3.1 or higher and try again, but i have installed jdk1.6.0_35 from oracle, still same issue.
I uninstalled weblogic and tried different options all are facing similar issues, can any help me what is doing wrong here? what is missing
-Thanks,

Hi Sahil
I am using Win8 64bit OS. And I'm trying to install V37380-01_1of2.zip and V37380-01_2of2.zip after the jdk-7u51-windows-x64.exe and wls1036_generic.jar were installed in my pc successfully. Below are the setup in my PC:
JAVA_HOME = C:\Program Files\Java\jdk1.7.0_51; which is correct location in my pc;
PATH = PATH=C:\Program Files\Java\jdk1.7.0_51\bin;C:\Program Files\Java\jdk1.7.0_51\jre\bin;D:\ProgramFiles\product\11.2.0\dbhome_1\bin;
A foler 'jre7' in the same forder with JDK was generated after install JDK. That means there are two folders under folder 'C:\Program Files\Java' after JDK installation.
I ran the command setup.exe -jreLoc C:\Program Files\Java\jdk1.7.0_51\jre under SOA folder disk1 foder 'D:\Tools\SOA\Disk1'. Oracle Universal Installer error shows: The Java RunTime Environment was not found at C:\Program\bin\javaw.exe. Hence, the Oracle Universal Installer can't be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
I checked there is no folder Program under C drive in my pc. so I don't know which part is wrong. Please advise, thanks.

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

Installing jdk 1.4.2 and 1.5 parallel

Hello,
I would like to know it is possible to install jdk 1.5 on a windows XP machine already countaining jdk 1.4.2.
I need both versions. I want to switch between them with Eclipse build in features or by selecting the whole path to the bin folder of the target version in batch scripts.
Is this possible or does dll or registry stuff collide?
Tanks in advance.
Alex

When you install a JDK in Windows, you are given the choice to not install a JRE (it's installed by default).
The JRE uses the Registry and also installs copies of java.exe, javaw.exe, and javaws.exe in /Windows/System32 directory. The JDK doesn't alter or install anything outside of the directory it installs into.
You can have as many JDK installs (directories) of different versions as you want, and access the programs in each with a full path to the program. You can provide the path information either from the commandline or a .bat file.
If any of the installs also install a JRE, then the Registry entries and java files in the System32 directory will be for the last version installed. There can only be one active JRE installed.
Whatever version's files are found first on the PATH environment variable's list will be the version executed when a naked java command (without the path) is issued. This also means that you will [usually] execute the version whose files are in the System32 directory, since that directory is [usually] the first directory listed in the PATh list.

Issue in installing oracle apps 11.5.5

Hello all,
i have an issue while installing oracle apps single node(vis demo).
if some one can help to sort out my issue or suggest some link where i can get the solution, i will be very thankful to him.
problem
1. i installed the j2sdk-1_4_2_06-windows-i586-p. also set the path
C:\j2sdk1.4.2_06\bin (this is the folder created while installing jdk).
also there is C:\Program Files\Java\j2re1.4.2_06\bin in window pragram folder.
i am sure which path has to set.
2. then install ms tool kit.
3. when i started apps installation then following erro is shown:
i/o exception in execprog:java.io.ioexception:createprocess: e:\dump\11.5.5\11istart001\rapidwiz\oui\nt\install\wiz32\setup.exe -responcefile c:\document~1\dhiren~1\locals~1\temp\rapidinstall\epd\vis8i.rsp error=2
"i know it is not apps forum but i get help then it will be great"
thanks n Regards
Yash

also there is C:\Program Files\Java\j2re1.4.2_06\bin in window pragram folder.
i am sure which path has to set.Do not use directories with space it the name (i.e. Program Files), so make sure you have it installed in another directory (i.e. C:\Java).
3. when i started apps installation then following erro is shown:
i/o exception in execprog:java.io.ioexception:createprocess: e:\dump\11.5.5\11istart001\rapidwiz\oui\nt\install\wiz32\setup.exe -responcefile c:\document~1\dhiren~1\locals~1\temp\rapidinstall\epd\vis8i.rsp error=2This is a generic error so please check the installation log file for details about the error.
Thanks,
Hussein

Issues in installing SAP NWDS

Hi guys,
I am trying to install SAP NWDS
First i installed jdk (jdk-1_5_0_11-windows-i586-p.exe)
[http://java.sun.com/javase/downloads/index_jdk5.jsp]
Then, i installed CE711SP1_IDE_SDN-Preview,
I am getting the error as,
You have to use a JDK as a JVM instead of a JRE.
Can anyone provide the proper link for JDK.
B'cos the above link also mentions it as JDK. i am confused with it.
regards.
santosh.

Hi guys,
Thanks a lot,
Now, after choosing the right jdk folder, nwds is installed.
After installing nwds, according to steps mentioned in install guide, i need to configure, update manager,
13. The update manager is
automatically invoked when
NWDS starts up. The update
manager asks you to select the
folder of the local site. The
local site is the folder in
which the
NWDS_platform.zip file was
extracted (see step 4 of this
installation). Navigate to this
folder and click on OK to
proceed.
But, it is not invoking automatically when i restart nwds.
Can u guide me to manually start update manager.thanks.
Another issue,
our xi system is on 3.0.
when i installed jdk-1_5_0_11-windows-i586-p.exe for nwds, IR & ID components are not working in jdk 5 version.
how to rectify it.....
santosh.
santosh .
Edited by: santosh koraddi on Aug 23, 2010 1:21 AM

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7 Where is appletalk or the replacement?
My it guy has set all the Ricoh (The only brand of printers we use.) to enable Appletalk. I am unable to see how to enable appletalk or an equivalent on Lion and have spent 3 hours now searching for it. If I connect to the printer via TCP/IP it prints random characters. I have a Ricoh working for another moddle but I am needing to use this machine. HELP!!!!!

AppleTalk has been gone eons ago. Connect via USB and see what happens. If you are networking the printer then advise on your connection set up.

Issue in Installing Oracle Service Registry 10.1.3.1 on Soa Suite 10.1.3.3

Hi,
I am facing issues while installing OSR 10.1.3.1 on soa suite 10.1.3.3
Below is the log message -
Configure Systinet Registry module ..
Configuring Registry...
[java] [java] ERROR: account.com.systinet.uddi.account.AccountCoreApiImpl - Initialization of accounts has failed. The config file with accounts probably has a bad format. For help please contact the administrator of the registry.
[java] [java] EXCEPTION: Length is too small. The minimal allowed length is 1.
[java] [java] org.systinet.uddi.InvalidParameterException: Length is too small. The minimal allowed length is 1.
ERROR: group_core.com.systinet.uddi.group.GroupCoreApiImpl - Initialization of groups has failed. The config file with groups probably has a bad format. For help please contact the administrator of the registry.
[java] [java] EXCEPTION: The user with login name 'admin' does not exist.
Configure BSC module ..
Repacking compiled bsc.jar JSPs for oraclefull
Make Service Registry module war...
Deploying application...
[java] [java] Failed at "Could not get DeploymentManager".
[java] [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
The above 'admin' username and password is populated by default in the installation screens.
I have tried changing to 'system' but again it gives the same error.
Any advices on this....
Thanks,
Anuj

HI Einstein,
We'll take this offline as discussed.
Thanks
Dan Hynes

Error while installing JDK 1.6 on Linux?

Hi,
Could not locate a suitable jar utility.
Please ensure that you have Java 6 or newer installed on your system
and accessible in your PATH or by setting JAVA_HOME
Below is environment variables on Linux. when I try to install JDK 1.6 I'm getting forllowing error.
do I need to add environment variable before installing JDK ? In windows it will automatically add to path variable while installing. how to fix above problem?
environment variables on Linux server below.
HOSTNAME=lx-cphrobi-t49x
TERM=xterm
SHELL=/bin/bash
HISTSIZE=1000
SSH_CLIENT=10.172.18.240 62878 22
OLDPWD=/opt/oinstall/software
SSH_TTY=/dev/pts/0
USER=hrobi
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or= 01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:* .bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.l zh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31 :*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35 :*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/hrobi
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/share/centrifydc/bin:/usr/X11R6/bin:/home/hro bi/bin
INPUTRC=/etc/inputrc
PWD=/opt/oinstall/software/Java
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/hrobi
LOGNAME=hrobi
CVS_RSH=ssh
SSH_CONNECTION=10.172.18.240 62878 10.179.8.117 22
LESSOPEN=|/usr/bin/lesspipe.sh %s
G_BROKEN_FILENAMES=1
_=/usr/bin/env

When you installing Java on Linux, installable should not ask for JAVA_HOME as you mentioned "Please ensure that you have Java 6 or newer installed on your system and accessible in your PATH or by setting JAVA_HOME "
Check this link for more info, it suppose to be as good as Windows
http://docs.oracle.com/javase/7/docs/webnotes/install/linux/linux-jdk.html

Error message while installing JDK on RED HAT - linux interprise 5

Hello!
I have got an error message while installing JDK on RED HAT - linux interprise 5:
[user@localhost Desktop]$ cd jdk-6u22-linux-i586-rpm.bin ./jdk-6u22-linux-i586-rpm.bin
bash: cd: jdk-6u22-linux-i586-rpm.bin: Not a directory
[user@localhost Desktop]$ ./jdk-6u22-linux-i586-rpm.bin
Unpacking...
Checksumming...
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-6u22-linux-i586.rpm
inflating: sun-javadb-common-10.5.3-0.2.i386.rpm
inflating: sun-javadb-core-10.5.3-0.2.i386.rpm
inflating: sun-javadb-client-10.5.3-0.2.i386.rpm
inflating: sun-javadb-demo-10.5.3-0.2.i386.rpm
inflating: sun-javadb-docs-10.5.3-0.2.i386.rpm
inflating: sun-javadb-javadoc-10.5.3-0.2.i386.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
Installing JavaDB
error: can't create transaction lock on /var/lib/rpm/__db.000
Done.
What is the problem?
Thanks!

Good point.
Moderator action: thread locked.

Unable to install JDK 6 on Windows Vista

Hi
I am unable to install jdk 6 (jdk-6u4-windows-x64)on windows vista. I am getting error at installing time and it will terminate process.
Can any one help me!
Thanks in advance
Dave

Not without exact problem information.
Read the Installation Instructions (at where you gor Java.)

Installing jdk on windows 7

Forgive me in advance as I am completely new to this. In September of this year I'll be starting an ict degree with the Open University. I figured I'd get a head start by learning a bit of java. I have installed jdk (64bit) for windows 7 fine, and altered the path so that the javac command works ok from the command prompt. However, it still does not work as I am getting the following error:
error while writing.......a required privelage is not held by the client
The problem seems to be that the javac application (and presumably all the others too) needs to be run in admin mode. I edited the properties of javac, and now when i use it from the command prompt it works fine. Is there an easier way around this?

Looks like you are trying to compile in a directory where you don't have rights.
Like a JDK directory under \program files. If this is the case, work in a directory under your user profile.
Copy samples from the JDK as necessary.

Issue in installing JDK 1.6

Similar Messages

Maybe you are looking for