Issue in usage of - ARP_RAXINV_MLS_PACKAGE.ARP_RAXINV_MLS_FUNCTION

Hi,
We are facing an issue in one of our programs which uses a language function ARP_RAXINV_MLS_PACKAGE.ARP_RAXINV_MLS_FUNCTION
Earlier on submitting the program, the parent program would submit only one child program depending upon the responsibility from where it is run.
i.e. If run from a US responsibility, it will print the output in English.
If run from a ARG responsibility, it will print the output in Spanish.
But recently our client has come up with an issue where on submitting the program, the parent request submits two child requests and the outputs come up in English and Spanish respectively (which is not expected)
Please help us in fixing this issue.
Regards,
Shruti

"recently our client has come up with an issue where on submitting the program, the parent request submits two child requests and the outputs come up in English and Spanish respectively"
As you stated this has come recently and suddenly... main question is.. what has been changed? Any code changes to the custom code? Any patches that you loaded? If you are not sure can you check the latest compile date of all items that are involved and/or on which your code is depending.
This might shine some light on it.
Regards,
Johan Louwers.

Similar Messages

  • 5.0.1 update - battery issue - check usage/standby stats

    There might be more than one problem but i did find mine and fix it.  Check your usage and standby in general settings and if they are the same, then you have the same problem I had (they should not be the same).  If they are the same, that means your phone is never going in standby mode.  I fixed the problem with a complete reload.  I did not choose to restore from backup because I wanted to be %100 sure it was a fresh load of the software, so I setup as a new iphone.
    Background: I upgraded from v4 to v5.0.1 a few days ago and started having battery issues.  I went to the apple store and they did some diag test on my phone/battery and said everything checks out good.  They said my options were to buy a new battery or drain my existing batter to zero, let it set for two hours, then recharge to %100 again and see if it fixes my problem (it did not). The person at the apple store ask me if that sounded like a good plan, I said no, not really (does not make much sense), Im not buying a new battery, especially since you said mine checks out good, but i will try the recharge and see what happens.  So, I was back to square one and then a friend told me about the usage/standy thing. Maybe this is a bug in the software when you do the upgrade (or at least for me) and v5.0.1 works fine from a fresh install.  My phone battery is working great now.  Looking at my usage stats now, I have 1 hour, 19 minutes usage and 3 hours, 17 minutes standby, and %90 battery.

    Glad that a Restore as New resolved your issue...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Issue  in usage decision

    Hi,
    During usage decision, i have moved the stock to scrap by mistake , can you please tell me how to reverse the UD.
    I tried through MB1B. The problem is we dont know in which storage location it is posted
    Can you please suggest me , how to proceed.
    One more issue.
    I want to bring down the scrap field in inspection lot stock screen, how to do it.
    Thanks in advance.
    Regards
    Karthik

    Hi
    To find material document no. :
    1. if you know the lot number, you can use QA03 (Display lot) Tcode and click on the item mat doc. The doc no with type 3 assigned is your required material doc.
    2. Goto MB51, and use movement type 553, material and plant and execute to get the material no.
    To reverse from scrap to QI:
    1. Activate insp. type 05 in QM view of material master.
    2. Goto MB1A, use movement type 554 to transfet the quantity. Lot will be generated in QI, do UD and transfer the lot to unrestricted usage.

  • STILL having issues with Usage Stats

    My usage stats STILL do not reset after I fully charge my iPhone (regardless of whether or not it is plugged into the wall or my computer). What is the deal? The only time they have reset is when I have reset the phone itself (that was about all the advice tech support had for me).
    This isn't a huge issue, the life of my battery seems normal to me. It is however a useful feature if it were to work properly, and being as how I paid $600 for my iPhone I would like all of its features to work.
    Has anyone else figured out how to resolve this issue? It is not convenient for me to go to an Apple store, so I would like to try to avoid that if possible.
    Thanks!

    I don't know if this will help you or not, but I have had a couple of weird things happen to me on this subject as well. I found that my stats would not reset when using the wall outlet to charge the iPhone. Also if I used the docking station to charge it with the iPhone OFF completely, it wouldn't reset until I put it back into the docking station after I had turned the iPhone back on. I didn't check to see if the result would be the same with the wall charger option. I hope this helps.

  • Issue in usage of presentation variable

    Hi
    I have made a Presentation Variable which reflects a value like 'FY 11 Q3' and gave a name yearqtr. Trying to use it as filter to report like 'name_quarter < @{yearqtr}. When i select an option of 'FY 11 Q2' it has to populate like this 'name_quarter<'FY 11 Q2'' instead it is replacing the variable like a number 'name_quarter<FY 11 Q2. Used another option of 'nam_quarter is less than @{yearqtr}' then it passing the sql as name_quarter='FY 11 Q2'. Tried to use cast it is not working.
    Pls help me out, how to resolve this issue. To achieve < with presentation Variable.
    Thanks
    Sandeep

    Hi Amith
    Thanks for responding, but my issue is when i pass the filter " period<@{presentationvariable}" and its getting converted to "period=presentationvariablevalue".
    I didnot get why its happening, it their a way to get out of this issue.
    Thanks
    Sandeep

  • Issue with usage of Clob variable to hold the output data...

    Hi All,
    we are getting the output of the sql query out from a function and this function return type is defined as CLOB.
    because of the volume of data being fetched we are getting the below mentioned error message when this Function is getting executed.
    “ORA-06502: PL/SQL: numeric or value error”. : character string buffer too small
    Now even with CLOB if we are getting the buffer too small error message ...is there any other way or approach we could handle this..
    our requirement is to fetch the complete value from this function in one shot and we don't want to split the data based on the size / number of characters...
    This is causing us lot of issues...could someone please suggest as to what could be done regards this ...

    Post your script. How can we tell when we can't see your code.
    Also, better to post the table ddl's script and some demo insert statement here. And, please provide the DB version, too.
    Generally, you should not get such error. So, please post these details.
    Regards.
    Satyaki De.

  • Xperia z2 strange issue battery usage graphic

    Hello everyone! Yesterday i did a factory reset to my xperia z2. Now when i want to analyze battery usage, the graphic of it appears very compressed on the estreme left (unreadable).. Any suggest? Thanks to everyone

    No I'm saying exactly what I said above - If you perform another full recharge then the graph will reset but will still be the same look or UI interface
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Hi I'm using iPhone 5s ..I don't use much but face battery issues ..usage comes only for 3 hours if I use wifi ..can someone tell if you are facing this issue ..

    Hi I'm using iPhone 5s ..I'm facing problems with battery ..usage time is only 3-4 hours if I use wifi and I don't use much ..can somebody please tell if you're experiencing the same problem ..average users get around 9-10 hours or even more

    Hello MengyaLiu, and welcome to the forum,
    I’m honestly not sure why our delivery team would have told you they were on their way to your home and then not arrive without an explanation as to why. Our delivery agents should be notifying you of all necessary changes in their delivery schedules, as we realize the inconvenience any possible delay may cause, so it’s regrettable to hear we failed you in this regard. I truly apologize for any frustration this oversight may have caused.
    While I’ve personally documented your feedback here at the corporate office to ensure something of this nature doesn’t happen in the future, I’m glad to hear our delivery team was able to make this right and successfully delivered your TV yesterday. Please feel free to let us know how it went and if you have any further questions for me. I’ll be glad to help.
    Best wishes,
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • XI Design Issue- BPM Usage and Performance

    Hi All
    System A is sending mutiple messages to XI and every message has a node called TEVEN which has line Items. The TEVEN is repeated and based on EId value. The receiver has to be decided, that means a single message can have multiple same Eid which has to be colleted in one set of Message and XI will keep on receiving such messages for 30 minutes and after the same grouping from all messages and their payload being done a file will be created to different Receivers (in case of Eid 1 the receiver will be System A in case of Eid 2 the receiver will be System B)
    How do I Achieve this in my BPM - the problem is to go through every message payload and then collect TEVEN header in one single message and keep on doing so for all messages received within 30 minutes and then using file adpater put those files on File Server (The receiving system desires to have only one file and will check every 30 minutes for the file)
    Any thoughts on designing this scenarion in XI are welcome. And also regarding comments on designing a BPM to handle this and the performance related with that.
    <ns0:TEVEN>
    <ns0:EText />
    <ns0:EId>0001</ns0:EId>
    </ns0:TEVEN>
    <ns0:TEVEN>
    u2026u2026.
    u2026.
    </ns0:TEVEN>
    BR / Swetank

    Hi,
    If you have collect the messages till 30 mins and then create a file then i see you have to use BPM only.
    You can use the correlation for different  Eid, or you can use the option of Enhanced Receiver Determination.
    The help for both is available on SDN.
    with regards,
    Ravi Siddam

  • Macbook Air running extremely slow - kernel_task at 300% cpu usage

    I purchased my Macbook Air roughly 15 months ago and it's performance has constantly been impressive since I purchased it - until roughly a fortnight ago. I came home from work one afternoon and it was running at a snails pace. I had recently upgraded to Yosemite though I'm unsure if this had anything to do with it. I had also recently installed FitBit software to sync to my new FitBit flex.
    It has continued to run in this manner constantly since the problem began. It is ridiculously slow, every single request takes a very long time to respond. Logging in takes forever. When I click on an app to open it, the icon bounces for 30 seconds or more, and it's not a smooth bounce either, it's quite a jagged bounce!
    I'm hoping someone is able to provide some advice, guidance or help. The laptop is no longer covered by the 12 month Manufacturer Warranty, and I did not purchase an Apple Care plan as no Apple product I've owned before has experienced issues like this.
    This whole experience is killing me! I'm suspecting hardware failure and I'm just so sad that this could happen to the laptop I've loved so much since I bought it!
    The problem:
    The kernel_task process is constantly running at 300% or higher cpu usage, with Activity Monitor indicating the processor is being maxed out by a system task. Also, the laptop's fan is constantly running at full capacity - from the moment the laptop turns on, or wakes up.
    What I think the problem might be:
    As a result of many, many Google searches, it appears that this behaviour may be due to the Macbook Air thinking it is overheating - and I will clarify here that it certainly is not. It is cool to touch, always, when this problem occurs. (yet the fan is almost taking off!). As a result of the MacBook Air thinking it's overheating, it not only is running the fan at a very high RPM (confirmed with iStat), but it also is intentionally choking the system with 'simple requests' in attempt to cool the computer down. Apparently this is a built-in feature of OS X. The kernel has priority over user tasks, causing all user tasks to be granted a lower priority, causing the computer to run INCREDIBLY SLOW. Even as I'm typing this, I'm about two sentences ahead of what is showing on the screen!
    Steps I have taken:
    - Read widely across the internet with every possible relevant search term I can think of
    - Downloaded iStat to see if any of the temperatures are too high (they all seemed fine..)
    - Disabled Bluetooth and Wifi. (no change)
    - Reset SMC (multiple times.., no change)
    - Reset PRAM (multiple times.., no change)
    - Drained the battery completely (2 or 3 times, no change)
    - Install Windows 7 on BootCamp in attempt to bypass the issue (CPU usage was 100% constantly in Windows also)
    - Uninstalled FitBit software (no change..)
    - Uninstalled other software I did not need (no change..)
    - Attempt to boot into Safe Mode / Recovery Mode (even in this modes, the same thing is happening)
    - Repaired Disk Permissions
    - Backed up all personal data
    - Used the built-in Internet Recovery mode to format my Macintosh HD and re-install a fresh copy of OS X (Mountain Lion). (no change…)
    - Re-upgrade to Yosemite (no change..)
    I've downloaded EtreCheck and here is the output:
    Problem description:
    OS X is running incredibly slow. kernel_task process is constantly using 300% and upward CPU usage.
    EtreCheck version: 2.1.5 (108)
    Report generated 20 December 2014 3:38:49 PM AEST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Air (11-inch, Mid 2013) (Verified)
      MacBook Air - model: MacBookAir6,1
      1 1.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 - VRAM: 1024 MB
      Color LCD 1366 x 768
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Uptime: 1:24:6
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 120.47 GB (106.42 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    User Login Items: ℹ️
      uTorrent Application (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
      QuickTime Plugin: Version: 7.7.1
      JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          17% WebProcess
          16% storeagent
          15% Safari
          9% WindowServer
          9% repair_packages
    Top Processes by Memory: ℹ️
      404 MB repair_packages
      395 MB WebProcess
      129 MB Safari
      86 MB App Store
      64 MB Finder
    Virtual Memory Information: ℹ️
      1.77 GB Free RAM
      1.76 GB Active RAM
      140 MB Inactive RAM
      623 MB Wired RAM
      425 MB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 13, 2014, 09:47:32 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-214732_[redacted].panic [Details]
      Dec 13, 2014, 08:31:50 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-203150_[redacted].panic [Details]
      Dec 13, 2014, 04:54:18 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-165418_[redacted].panic [Details]
      Dec 13, 2014, 07:05:03 AM /Library/Logs/DiagnosticReports/Kernel_2014-12-13-070503_[redacted].panic [Details]
      Dec 20, 2014, 02:15:38 PM Self test - passed

    Hi,
    I have an update so I thought I would share in case any other users are experiencing a similar problem.
    I made an appointment with the Genius Bar at the Apple Store.
    I went in and they ran a thorough diagnostic check on my Macbook Air and determined that the sensors were indeed faulty - several were providing no information "No reading" instead of providing a temperature. Thus, the Air was unaware of the temperature across multiple components.
    Despite the laptop being outside the 12 Month Manufacturer Warranty, the Apple Store determined that it was covered under warranty through Australian Consumer Law - the laptop is now in for a complete repair under warranty at no cost to myself.
    I couldn't be happier.

  • After upgrade, high cpu usage while browsing

    not sure what happened. i performed a system upgrade, as detailed in my log:
    [2010-04-18 20:09] synchronizing package lists
    [2010-04-18 20:10] upgraded pacman (3.3.3-1 -> 3.3.3-5)
    [2010-04-18 20:10] synchronizing package lists
    [2010-04-18 20:10] starting full system upgrade
    [2010-04-18 20:16] upgraded acl (2.2.48-1 -> 2.2.49-1)
    [2010-04-18 20:16] upgraded libdrm (2.4.18-2 -> 2.4.19-2)
    [2010-04-18 20:16] upgraded libgl (7.7.1-0.1 -> 7.7.1-1)
    [2010-04-18 20:16] upgraded ati-dri (7.7.1-0.1 -> 7.7.1-1)
    [2010-04-18 20:16] upgraded bash (4.1.002-2 -> 4.1.005-1)
    [2010-04-18 20:16] upgraded openssl (0.9.8n-1 -> 1.0.0-2)
    [2010-04-18 20:16] Clearing symlinks in /etc/ssl/certs...done.
    [2010-04-18 20:16] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
    [2010-04-18 20:16] Running hooks in /etc/ca-certificates/update.d....done.
    [2010-04-18 20:16] upgraded ca-certificates (20090814-2 -> 20090814-3)
    [2010-04-18 20:16] upgraded curl (7.20.0-1 -> 7.20.1-1)
    [2010-04-18 20:16] upgraded db (4.8.26-1 -> 4.8.26-2)
    [2010-04-18 20:16] upgraded device-mapper (2.02.61-1 -> 2.02.62-1)
    [2010-04-18 20:16] upgraded dhcpcd (5.2.1-1 -> 5.2.2-1)
    [2010-04-18 20:16] upgraded hunspell (1.2.8-2 -> 1.2.9-1)
    [2010-04-18 20:16] upgraded enchant (1.5.0-3 -> 1.6.0-1)
    [2010-04-18 20:16] upgraded x264 (20100312-1 -> 20100410-1)
    [2010-04-18 20:16] upgraded libvorbis (1.2.3-1 -> 1.3.1-1)
    [2010-04-18 20:16] upgraded ffmpeg (22511-1 -> 22837-2)
    [2010-04-18 20:16] upgraded sqlite3 (3.6.23-1 -> 3.6.23.1-1)
    [2010-04-18 20:16] upgraded heimdal (1.3.1-3 -> 1.3.2-1)
    [2010-04-18 20:16] upgraded libcups (1.4.3-1 -> 1.4.3-2)
    [2010-04-18 20:16] upgraded gtk2 (2.20.0-1 -> 2.20.0-2)
    [2010-04-18 20:16] upgraded kbd (1.15.1-1 -> 1.15.2-1)
    [2010-04-18 20:16] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2010-04-18 20:17] upgraded kdebase-workspace (4.4.2-2 -> 4.4.2-3)
    [2010-04-18 20:17] upgraded kernel26-firmware (2.6.32.10-1 -> 2.6.33.2-1)
    [2010-04-18 20:17] >>> Updating module dependencies. Please wait ...
    [2010-04-18 20:17] >>> MKINITCPIO SETUP
    [2010-04-18 20:17] >>> ----------------
    [2010-04-18 20:17] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-04-18 20:17] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-04-18 20:17] >>> More information about mkinitcpio setup can be found here:
    [2010-04-18 20:17] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-04-18 20:17]
    [2010-04-18 20:17] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-04-18 20:17] ==> Building image "default"
    [2010-04-18 20:17] ==> Running command: /sbin/mkinitcpio -k 2.6.33-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-04-18 20:17] :: Begin build
    [2010-04-18 20:17] :: Parsing hook [base]
    [2010-04-18 20:17] :: Parsing hook [udev]
    [2010-04-18 20:17] :: Parsing hook [autodetect]
    [2010-04-18 20:17] :: Parsing hook [pata]
    [2010-04-18 20:17] :: Parsing hook [scsi]
    [2010-04-18 20:17] :: Parsing hook [sata]
    [2010-04-18 20:17] :: Parsing hook [filesystems]
    [2010-04-18 20:17] :: Generating module dependencies
    [2010-04-18 20:17] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-04-18 20:17] ==> SUCCESS
    [2010-04-18 20:17] ==> Building image "fallback"
    [2010-04-18 20:17] ==> Running command: /sbin/mkinitcpio -k 2.6.33-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-04-18 20:17] :: Begin build
    [2010-04-18 20:17] :: Parsing hook [base]
    [2010-04-18 20:17] :: Parsing hook [udev]
    [2010-04-18 20:17] :: Parsing hook [pata]
    [2010-04-18 20:17] :: Parsing hook [scsi]
    [2010-04-18 20:18] :: Parsing hook [sata]
    [2010-04-18 20:18] :: Parsing hook [filesystems]
    [2010-04-18 20:18] :: Generating module dependencies
    [2010-04-18 20:18] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-04-18 20:18] ==> SUCCESS
    [2010-04-18 20:18] upgraded kernel26 (2.6.32.10-1 -> 2.6.33.2-1)
    [2010-04-18 20:18] upgraded kile (2.1b3-2 -> 2.1b4-1)
    [2010-04-18 20:18] upgraded libarchive (2.8.3-1 -> 2.8.3-3)
    [2010-04-18 20:18] upgraded libfetch (2.30-1 -> 2.30-3)
    [2010-04-18 20:18] upgraded libldap (2.4.21-1 -> 2.4.21-2)
    [2010-04-18 20:18] upgraded libpcap (1.0.0-1 -> 1.1.1-1)
    [2010-04-18 20:18] upgraded libssh (0.4.1-1 -> 0.4.1-3)
    [2010-04-18 20:18] upgraded libzip (0.9-1 -> 0.9.3-1)
    [2010-04-18 20:18] upgraded lvm2 (2.02.61-1 -> 2.02.62-1)
    [2010-04-18 20:18] upgraded mdadm (3.1.1-2 -> 3.1.2-2)
    [2010-04-18 20:18] upgraded mesa (7.7.1-0.1 -> 7.7.1-1)
    [2010-04-18 20:18] upgraded mkinitcpio-busybox (1.15.3-5 -> 1.16.1-1)
    [2010-04-18 20:18] upgraded ntfs-3g (2010.1.16-1 -> 2010.3.6-1)
    [2010-04-18 20:18] installed pm-quirks (0.20100316-1)
    [2010-04-18 20:18] upgraded pm-utils (1.2.6.1-4 -> 1.3.0-2)
    [2010-04-18 20:18] upgraded postgresql-libs (8.4.3-1 -> 8.4.3-2)
    [2010-04-18 20:18] upgraded qca-ossl (2.0.0-2 -> 2.0.0-3)
    [2010-04-18 20:18] upgraded psi (0.14-2 -> 0.14-3)
    [2010-04-18 20:18] upgraded python (2.6.5-2 -> 2.6.5-3)
    [2010-04-18 20:18] upgraded qt (4.6.2-2 -> 4.6.2-3)
    [2010-04-18 20:18] upgraded qtcurve-kde4 (1.2.0-1 -> 1.3.1-1)
    [2010-04-18 20:18] upgraded smbclient (3.5.1-1 -> 3.5.2-1)
    [2010-04-18 20:19] upgraded virtuoso (6.1.0-1 -> 6.1.1-1)
    [2010-04-18 20:19] upgraded soprano (2.4.1-1 -> 2.4.2-1)
    [2010-04-18 20:19] upgraded sudo (1.7.2p5-1 -> 1.7.2p6-1)
    [2010-04-18 20:19] upgraded syslog-ng (3.0.4-3 -> 3.1.0-1)
    [2010-04-18 20:19] upgraded taglib (1.6.1-1 -> 1.6.2-1)
    [2010-04-18 20:19] upgraded texlive-bin (2009.5-2 -> 2009.5-3)
    [2010-04-18 20:19] upgraded tzdata (2010g-1 -> 2010h-1)
    [2010-04-18 20:19] upgraded util-linux-ng (2.17.1-1 -> 2.17.2-1)
    [2010-04-18 20:19] upgraded wget (1.12-1 -> 1.12-2)
    [2010-04-18 20:19] upgraded wpa_supplicant (0.6.10-1 -> 0.6.10-2)
    [2010-04-18 20:19] upgraded xf86-video-ati (6.12.4-3 -> 6.12.192-1)
    [2010-04-18 20:19] upgraded xf86-video-vesa (2.2.1-1 -> 2.3.0-1)
    [2010-04-18 20:19] upgraded xorg-server (1.7.5.902-1 -> 1.7.6-3)
    but now, when i use rekonq (also tested arora; same issue), cpu usage for the browser shoots up to nearly 50% and stays there. also, pages don't load unless i move my mouse around. flash is worse as well.
    (note: after my upgrade, i got a black screen on booting up. i had to use the 'nomodeset' option to disable kms. this probably isn't related, but i thought it might be worth mentioning.)
    any ideas?
    Last edited by anti-destin (2010-04-19 16:58:41)

    you're right. i forgot that i made some changes to my igoogle page. the chat function is the culprit. adding it causes the spike. i've reported the problem. thanks for the help!

  • SAP NetWeaver 7.02 ABAP Trial Version Installation issues

    I have been trying to install 7.02 trial version for a while but I keep running into issues. At present I am stuck, the install has been at the same load for the past 6 hours with no indication of an error or progress. Below is the last part of the program starter output screen and the logs. Please help
    INFO       2011-02-28 21:16:35.505 [synxccuren.cpp:775]
               CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
    Switched to user: cfm\nspadm.
    INFO       2011-02-28 21:16:35.661
               CJSlibModule::writeInfo_impl()
    Output of "C:\Program Files\Java\j2re1.4.2\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
    Logs:
    Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 35, failed 0, total 37.

    The install finally progressed but I am now getting the following error -from C:\usr\sap\NSP\DVEBMGS00\work\dev_disp-please help if you know th issue
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    7080
    sapstartsrv.exe
    19532 K
    27284 K
    54172 K
    106692 K
    8
    5852
    conhost.exe
    384 K
    2312 K
    556 K
    32188 K
    0
    5056
    msg_server.EXE
    [MS] NSP_00
    7932 K
    7932 K
    8592 K
    8592 K
    1
    6976
    conhost.exe
    2336 K
    2336 K
    560 K
    560 K
    0
    8864
    disp+work.EXE
    27872 K
    27872 K
    66672 K
    67484 K
    6
    6684
    conhost.exe
    2332 K
    2332 K
    556 K
    556 K
    0
    Sum
    60388 K
    131108 K
    Error 11 while initializing OS dependent part.
    ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   10357]
    ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   10271]
    DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Mar 01 18:20:26 2011
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Mar 02 02:20:26 2011
    ========================
    No Type  Pid    Status  Cause Start Rstr  Err Sem Time Program          Cl  User         Action                    Table
    Dispatcher Queue Statistics               Wed Mar 02 02:20:26 2011
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    2000
    0
    0
    --------++++--
    +
    DIA
    0
    0
    2000
    0
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          0
    wake_evt_udp_now     0
    wake events           total     0,  udp     0 (  0%),  shm     0 (  0%)
    since last update     total     0,  udp     0 (  0%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Mar 02 02:20:26 2011
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Mar 02 02:20:26 2011
    =============================
    Slots: 500, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Mar 01 18:20:31 2011
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >cfm_NSP_00                              < (normal)
    DpJ2eeDisableRestart
    DpHalt: switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    DpHalt: stop work processes
    DpHalt: terminate gui connections
    DpHalt: wait for end of work processes
    DpHalt: not attached to the message server
    DpHalt: cleanup EM
    EsCleanup( )
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 8864) [dpxxdisp.c   11177]
    DpHalt: Good Bye .....

  • Ovi sign in Issue on E5

    Hi all
    I have a major issue on usage of OVI store on my E5 , every time I enter my username & password it just gives me a POP UP " Invalid Username " .....but the same ID works on my PC.....Appreciate ur inputs on this

    I can login OviStore without any problem.
    Which firmware software version do you have? and which RM version. (Press *#0000# to know this)

  • CPU usage 100%  when WLS 10.3.3 is idle on OS X 10.6.4 (Snow Leopard)

    I've installed WLS 10.3.3 on OS X 10.6.4 and executed using the instructions in the README (including setting the MEM_ARGS).
    Upon startup, the CPU usage spikes to ( then stays ) around *104%* ( dual-core CPU ); this, of course cripples the computer to where all running applications suffer. Attempting to access the console, brings the system to it's knees. This happens even if it is the only (non-system) application running.
    We need to be able to run WLS on our local development machines (MacBook Pros from 2007-present).
    We are currently running OAS (OC4J) on the machines with out any issues (CPU usage at OAS idle = ~1.1%).
    Are there any WLS performance settings that can be adjusted to alleviate the CPU utilization issue?
    My System Info:
    Model Name:     MacBook Pro
    Model Identifier:     MacBookPro4,1
    Processor Name:     Intel Core 2 Duo
    Processor Speed:     2.4 GHz
    Number Of Processors:     1
    Total Number Of Cores:     2
    L2 Cache:     3 MB
    Memory:     4 GB
    Edited by: user8664206 on Aug 3, 2010 8:54 AM

    Thank you!
    The key was modifying the "setDomainEnv.sh" file (this file is generated using the domain GUI configuration tool).
    I added the following at the top of the script (just below the comments):
    JAVA_VENDOR="Sun"
    export JAVA_VENDOR
    I modified:
    SUN_JAVA_HOME=""
    export SUN_JAVA_HOME
    ...to be:
    SUN_JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home"
    export SUN_JAVA_HOME
    Now when I execute the container, it consumes only 0.2% of the CPU.
    Thanks again,
    Jim

  • Issue while making a AJAX call to a servlet in ALUI.

    Hi,
    The problem scenario is :
    I log into the portal using "http://147.149.132.93:7001/portal/server.pt"
    i have two instances of applications which have same files but provide different functionality one on 147.149.132.93 and other on 147.149.132.102 .
    I have configured my portlet that points to the application on 147.149.132.102 , when i make a ajax call to a servlet using the relative path for the aaplication , in normal scenario the ajax should make call to the servlert on the 147.149.132.102 but this does not happen and ajax makes call to the servlet on the machine 147.149.132.93 .
    Is there any issue regarding usage of Ajax in ALUI portal?
    Why the Ajax takes the server path from the portal login URL and not from the remote server configured for the portlet ? ?:|
    HELP !!!!!!!!!!!!!!!
    Regards,
    Prashant

    I m also facing same problem. I resolve the problem by simply giving >complete servlet address in ajax call.There are 2 issue with this:
    1) AJAX call will bypass portal, so it makes calls unsafe + you can not use portal functionality anymore. Plus some other issue like session expiration and so on.
    2) URL is hardcoded, so it's difficult to manage.
    All calls (include ajax) have to go through portal in portal environment. It means that AJAX url has to be gatewayed like any other url. There is no issue with ajax in portal. In G6 make sure that <inline> refresh checkbox (for WS) is unchecked.
    Here is example how to create AJAX URL on the fly by using Javascript. Let's say we have 2 files in root folder of <RemoteProjectName> web application:portlet.jsp file and ajaxExample.jsp.
    Code in portlet.jsp may looks like
    <script>
    var Url = "<pt:url xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/' pt:href='ajaxExample.jsp'/>";
    </script>
    Here is what you can get as result of this transformation (based on data provided in first post):
    http://147.149.132.93:7001/portal/server.pt/gateway/PTARGS_0_0_XXX_XXX_X_XX/http%3B/147.149.132.102%3B/RemoteProjectName/ajaxExample.jsp
    where XXX - are numbers specific to particular portal environment.
    Edited by Bryazgin at 12/21/2007 7:43 AM

Maybe you are looking for