Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Hello
We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same.
Regards
Ankit Arora

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

Similar Messages

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

Discount Condition type is picking Tax Code(URGENT)

Dear All,
I have a very serious problem on Condition types and Tax codes.
I have configured the pricing procedure with two taxes (China).
Sr.No   Condition Type    TAX Code
1               VAT                  V7
2.             CONC                V6
Now, If i will give some Customer discount Condition type then System is picking picking Tax code as V7.For that i have not maintanied any Condition records in VK11.
What should be the reason for this?
Since it is very Urgent Issue,Please Guide me on the same
Thanks
Vinay

Have you run the country installation program before you started the customisation. This is supposed to install the entire information required to configure the tax scenarios for the particular country. If you are trying to create the tax codes and the procedureson the vanilla system, then you need to work very closely with FI because the posting for tax is done from the tax procedure in FI. As an SD or MM consultant we are only interested in the Taxes on sales and purchases and their customisation. The procedure and the Tax codes are created in FI.
This is the first thing that is normally done after you copy client 000 to start your customisation. The coountry installation program does not run if you ahve made changes to the client.
regards
Jude

Show Concerning Condition Type in PricingProcedure while Create of Contract

Salute Masters!!
Please provide me solution for this......
There are several Tax Condition Type in Pricing Procedure; when creating contract, all the Tax Condition type is automatically coming in Condition Tab. Here, user has to delete the irrelevant Tax Condition Type and keep only that concerning Region (State) Tax Condition Type every time.
Now, is it posible to get only concerning Region (State) at Condition Tab while creation of Contract to that particular Customer?
I shall be thankful to you all for solution.
Regards,
Srivastav
+91 7829755109

You can use 2 regions in access of tax condition type:
1. Region from Delivering Plant
2. Region from Customer Master Ship-to Party.
Refer following SDN thread for your understanding/reference:
- Tax determination .
Regards
JP

VPRS Condition is missing in invoice for bacth determine line item

Hi Gurus,
I have an Concern, My user has created Sales order with three line items.
He did delivery and Invoice individually for each line item.
For 2 line items he entered batch manually and did invoice there we didn't find any issue.
For third line item he did auto batch determination there for that item VPRS condition is missing in invoice.
I have checked the note ( 70038 ) and I have applied the note also, But still I am facing same problem.
Please provide me solution if any modification need to be done,
Thanks and Regards
Subbu

Hi Subbu
As VPRS condition type is coming for the first 2 line items and not for 3rd line item , so kindly check the Material Master Record->Accounting tab.What is the difference between the 3rd material and another 1st and 2nd materials.Also check in the Analysis what it is showing for the third line item billing document
Regards
Srinath

We would like to Use the SKTO condition type as Acrual condition

Hello Experts,
We have a requirement to track the possible cash discounts in discounts bucket, Hence we though that we will use the SKTO condition type as a Accrual condition type and post to Accrual accounts at the time of billing document creation.
While processing the Payment we will clear the bucket with relevant discounts with eligible payment terms.
We are debating and discussing the use of SKTO as a Accrual condition type and start posting GL accounts with it (This means that we are removing the statistical check box from pricing procedure).
In a nutshell our requirement is.
1. Track the cash discounts in a Accrual bucket.
2. Relieve the accrual when payment is applied (This will be done in Cash app)
3. What are the consequences of making this change?
4. Is there a better way of managing this?
Thanks
Sreedhar

Hi,
Your issue can be solved by CO consultant.
Your CO consultant can generate report from CO-pa documents.(when invoice is released to a/c ,FI and CO documents are generated) and you know SKTO- cash discount amount even if it statistical condition type.
You do not need to change in Pricing procedure for tracking cash discount.
SKTO is linked wtih payment terms and it is applied accordingly through standard programs.
thanks,
Vrajesh
Edited by: Vrajesh G. Nayak on Jun 2, 2010 5:12 PM

Cash discount condition types

Hi Gurus,
what is the difference between SKTV and SKTO cash discount condition types?
Thanks

Dear Biswas,
Both SKTO and SKTV is Cash Discount Condition Type. Both of them are Item Condition Type.
The major difference among the two is SKTV is Group Condition.
As per Standard Group condition - It indicates whether the system calculates the basis for the scale value from more than one item in the document. To use it effectively, the items must belong to a group. You can freely define the group to meet the needs of your own organization. The items can, for example, all belong to the same material group.For instance, a sales order contains two items. Both items belong to the material group 01.
- Material Quantity Material group
A 15 01
B 10 01
The group condition indicator is set in the definition of the condition type for material group discounts. The condition record for material group 01 includes the following pricing scale:
Scale quantity Discount
from 1 pc -1%
from 20 pc -2%
Neither item alone qualifies for the 2% discount. However, when the items are combined as part of a group condition, the combined quantity creates a basis of 25 pieces. This basis then exceeds the scale value of 20 pieces, which is necessary to qualify for the higher discount.
So, these both Cash Discount Condition Type works on the basis of Cash payment received with relevent term of payment for Cash Discount, if offered any to you customer.
Regards,
Abhee.

Using 2 discount conditions as %10+%15=%25

Dear all,
I have 2 discount conditions. Z01= %10 and Z02 = %15
Normally if pricing procedure like below, system use the conditions by one by and total discount is less than %25
PR00
Z01
Z02
Customer wants to use the discount as %10+%15=%25
How should I design the pricing procedure to achive this.
Thanks

Hi,
1.maintian subtotal for 2 discount condition types.( Z01+Z02 = subtotal 1)
2.Copy the subtotal 1 value to another total discount condition type (Z03)
3. Maintian condition record in VK11 for Z03 as 100%.
Hope this helps.
Regards,
Sharan
Edited by: SharanKumar.S on Oct 31, 2011 2:25 PM

Sale order showing a discount condition type twice in conditions Tab

Dear Experts,
Sale order showing a discount condition type twice in conditions Tab.
Could you resolve my issue?
Thanks in advance.
Regards,
Ravi

Hi,
In the Sales order, go to Conditions and in the Pricing 'Analysis' , check for where the system is determining the two values of this discount condition. It may be possible that it is determining from two condition tables.
Also in the access sequence of this condition type, please make sure that the 'exclusive' indicator is checked for the condition tables.
Please check if it helps.
Thanks,
Saurabh

Regarding the Discount condition type in sales order

Hi All
I have 3 key combinations in my Discount Condition Type. I have maintained records at all the 3 key combinations and all the records are relevant for a sales. In my sales order all the relevant records (all 3 records) getting displayed, but for calculation all the three discounts are considered. I do not want use exclusive concept in access sequence.
But when i use the same access sequence for Base Price, it is behaving deferrently, where whatever record is found at the last is getting considered for calculation.
Please give your valuable comments.
Your inputs are appreciated.
Thanks and Regards
Prasad

Dear Friend,
If you have specified the various Discounts under the three access Sequence .
There your pricing system condition type will have three records.
To achieve the best result you might use the requremnets routine in the access sequence determination.
But if you consider this......
Take Three discount Condition types for that matter....
Now to find out the best conditions out of conditions you can use the functionally of Condition exclusions
which you will find in the Basic Functions --> Condition Exclusions.
This methord you will not be required to maintain any routine.
regards,
SAP SD

On Net value: Discount Condition Type

Hi,
I would like to know whether the below requirement can be fulfilled with the standard SD configuration.
As far as I know all discount condition types calculates on Gross value. But I have a discount condition type (lets say 123 = Special Discount) which should calculate based on Net value. I can create a step after Netvalue but the problem I see is, how the system calculates Output tax
eg.
10 PR00
20 ABC (Customer discount)
30 XYZ (Material discount)
40 Discount Sum
50 Net Value
60 123 (Special Discount)
70 MWST (output tax)
So if I place discount type 123 after Net value, I think it will calculate on net value, but the problem might come with MWST as it cant calculates on Netvalue but on 123. Am I right? I knew it can be done with the ABAPer help. But I would like to know whether it can be done with standard (alrady predefined) SAP configuration. (by assigning any routine or some settings in Pricing procedure determination in V/08 ???)
Thank you.

Hi santosh
Sub total will the PR00 - Discount sum
Net price will be Sub total - Special discount
how do I mention that sub total will be PR00 - Discount. I configure like this
10 PR00
20 ABC (Customer discount)
30 XYZ (Material discount)
40 Discount Sum from20 to39
50 Sub total
60 123 (Special Discount)
70 Net price
80 MWST (output tax)
90 Total
when I indicate from 20 to 39 besides Discount Sum, system will sum the discounts between step 20 to 39. How do I write at sub total like this, so that system will deduct the discount sum from PR00. Similary how do I write Sub total - Special discount.
Could you please explain bit more detail.
Thank you.

DIscount condition types mapping to value field (+/-)

Hi,
1)While mapping SD condition types to Copa value fields, do we need to check the transfer +/- symbol for all discount condition types...
or when do we need to check it..
2) In our case we have some 4 to 5 discount condition types mapped to copa... If we check that symbol, as discount will always be negative system is posting discount values in negative in copa. At the time of report execution, since we give formula as Sales Less discount and discount is already negative in system it is getting added... so we are planning to change formula as sales + discounts... is that approach is right?
Reg
Karthik

Hi Ajay,
Thanks for your quick reply... generally for which condition types do we need to check this indicator in ke4i... for all discount condition types and rounding off condition types... is that right? Because as I told we have some 4 to 5 discount condition types and we have ticked for only one discount condition type which is mostly used...
Reg
Karthik

Authorization for discount condition type

Hi Experts
1)when create a sales order client want flexibility for discount condition type
like 10% ,15% , 20% it should not be manual and end user can choose from drop down and
2) If they want to give excess discount there should be authorization any supervisor can give excess discount
how to map this authorization to condition type
Regards

hello again, friend.
go to IMG > SD > Basic Functions > Pricing > Pricing Control > Define Cond Types... here you will find the settings for the upper and lower limits. please note that the larger discount rates would be represented by the lower limit. for surcharges, the lower rate is the lower limit.
scales in pricing allows you to set different discount/surcharge rates or fixed amounts depending on either value, quantity, weight, etc. in the same pricing condition record (using VK11 or VK31). if you look inside your condition type using V/06, you will see under sub-tab Scales if this has been set.
example: condition type Z007, with Scale 'Quantity'
you can set a discount of 2% if item quantity is from 0 to 100 pieces
you can set a discount of 3% if item quantity is from 101 to 200 pieces, and so forth...
regards and thanks.

Discount Condition types is not showing values

Hi All,
We have defined 5 discount Condition Types which will work based on percentage all these are header level, but in the transaction when i am entering 2% or 3% it is taking discount percentage but its not showing discount values.
Please help me to resolve this issue.......
Thanks in Advance.

Hi,
Refer to note 731831- Transaction DB02 always shows 0 as the number of tables.
Regards,
Maheswaran

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Similar Messages

Maybe you are looking for