Issue regarding 0MATERIAL_ATTR - Attribute not Updated for Some Materials
Hi All,
As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
I had also activated master data by running Attribute change run but still problem persist.
Please help.
Regards,
Divyesh Khambhati
Hi Venkatesh,
I had write code in CMOD for MRP controller.
As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
if I take one example..
For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
please help.
regards,
Divyesh Khambhati
Similar Messages
-
Regarding OBD is not created for some materials
Hi,
I have created one STO using BAPI_PO_CREATE1 with 10 articles,for that STO,OBD is automatically created.In that OBD is created for 7 articles and for the remaining 3 articles OBD is not created.Can any one tell me,what is the reason?
ThanksDear Arun,
You wrote
=============
Cache is first in first out... if you exceute too many queries then cache might force out the first query for want of memory. Check the cache immediately after the query is ruin once then you should also check the cache settings for the query in RSRT to see if cache is enabled for the query. Ideally the option for cache should be " Main memory cache with swapping " in RSRT.
==============
I executed my query in question as the first query but no cache was created. The options for the cache mode was 'H Query reads data upon navigation' and 'main memory without swapping' along with a tick in the 'Query cache added to Delta' checkbox.
Just to check, i went on removing formulaes and calculated key figures and free characteristics from the query one by one and in the end the cache did get created for the same query. But I still could not pinpoint the exact reason for the query not producing cahce in its original form.
It only makes me think that there may be a particular scenarios or a peculiarity pertaining to the design of a query, that would prevent its cache being generated.
regards,
Kulmohan -
LastLogonTimeStamp Attribute Not Updated for Computer Account Over SSL-VPN
We like to use LastLogonTimeStamp (LLTS) to find stale computer accounts, disable them, and eventually delete time. What we have found is that domain member computers that connect to the domain exclusively by SSL-VPN (for instance in the case of employees
who work from their home office) do not update LLTS. Consequently these computers frequently appear on stale computer reports.
I suppose the required logon type is never used when connecting over SSL-VPN. Therefore I would like to know if there is a way via a logon script or some other method that we can update this attribute.That is normal as you connect to VPN using locally cached credentials for the user and the computer accounts.
My recommendation to track these computers is to have an agent that periodically report the computer status (Example: Using Microsoft Intune) or have a scheduled task that will run a script when the user is connected to VPN and register the computer name
as active in a file that is hosted in a share.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Data not updating for raw materials only in cube level
HI all gurus,
we have flow like ods1->ods2->cube1,cube2 and cube3.
In ods1 we mapped ZMATERIAL WITH OMATERIAL.
In ods2 we mapped zmaterial with zmaterial directly.
In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules 0mat_type is master data attribute of zmaterial.
But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
what could be the problem.
I checked the Attribute change run.
I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
Please help and i will definitely assingn the points.
It's very urgent becauz total my development work is stopped.
Thanks & regards,
Kumar.Hi,
Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
PB -
Why is iTunes play count not updating for SOME songs played on iPod Touch?
I have noticed that when I play some songs on my iPod the play count won't update. This only happens with some I bought recently. I was actually testing witha song I purchased 3 weeks ago and the play count will only update if I play it on the computer. However, when I played the song on my iPod Touch 4g running iOS 5, nothing happened. How can I fix this as I use the recently played playlist quite often. also, Im pretty sure most of the songs were downloaded from iTunes app in my iPod.
I've had this problem before with my 1G and still have it with my 2G. I can replicate it EVERY TIME.
If I listen to nothing but music on my iPod touch, and then go back home and sync, I have no problems with the playcount and smart playlists.
However, if I listen to a bunch of music, then play a few games, or browse Safari for a while, any record of my recently listened to music is wiped out. The Music application even loses my place in what song I was listening to and even which artist/album I was last listening to -- kicking me back to main music screen when I click the Music icon on the Home screen.
My hypothesis -- Apple is not using a dedicated/untouchable portion of memory to store playcounts. It is shared with all other memory access. So if an application or Safari uses a lot of memory during your session AFTER you've played your music, your playcounts gets wiped out in the process.
But that's just my take on the situation. -
MAM application is not working for some users
Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova -
Validity Table not updating for 0IC_C03 while updating data
Hi,
1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
Key fields : 0Plant
0Calday
if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
and 2LIS_03_BX in DTP I am getting below this option only
Can you please give me solution for this issues.
Regards
UmashankarHi Uma,
Please go through the below link which might be helpful.
Not able to Edit Validity Table : RSDV
Marker Update Option is available under Collapse tab of Info cube.
Thanks,
Karan -
Message server information not updated for SIDs in SMSY
How do I get the message server information updated for systems in SMSY?
I moved a system from one server to another but the information is not updating for the Java stack. The informatoin was updated successfully for the ABAP, but not the Java side. I've reviewed the SLD information and everything there is correct.
In change mode the information is greyed out, so it's updated automatically somewhere.
Thanks for any help.
RyanHi Ryan,
What's your solution manager version?
Have you taken a look into this note?
-> 1301106 SMSY: Enhancements and errors in Enhancement Package 1
Within this note you will find another list of related notes that may fix your issue.
Please take a look as there are many notes reporting similar issues, like:
1298517 SMSY: Server of SCS instance not known in SMSY
1273095 SMSY: Incorrect database server (Java)
Regards,
Daniel. -
Can't see updates for some Apps
Hi! I have a problem with the Apps in iTunes.
I know that TomTom have released yesterday a new version (1.7) of all their navigators. I have TomTom Italy and TomTom Western Europe. For some unknown reason, when I checked for new updates, it only displayed the new version for the Italy app (and some other apps, of course). So I updated it, thinking that maybe the WE version would be available in the next hours. But still, after more than 24 hours, I have no updates for the Western Europe App.
I've already downloaded updates for some other Apps, so I don't know what's going on.
I've checked in the TomTom page in iTunes and the new version is there but I don't want to download it, because I want iTunes to see it, otherwise I can't trust it anymore for all my Apps updates.
What can I do? Is this a knows issue?
Thank you so much. Bye!Please, can someone help me?
I'm not the only one having this problem:
http://forums.toucharcade.com/showthread.php?t=4670
http://getsatisfaction.com/apple/topics/itunes_application_store_lying
Unfortunately, no answers there. -
Originating document number not updated for one invoice line item
Hi,
We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
Best Regards,
RohitDear All,
I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
Is there any other way to clear this document.
Thanks... -
KSPP -Scheduled Activity are not updated for last 2 periods
Hi All,
When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
Do we miss any thing.
Regards,
RajHi,
It can be due to the sales demand you have uploaded and the Lead time in the material master
because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
Ajay M -
Outlook autodiscover is not working for some users in coexistence
Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank youHi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?
You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.
-
Inspection Lot Status (CROK)not updating for Certificate Reciept
Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
QM Procurement : Checked
Control Key :0005
Certificate Type :YA72
3) Goods Recipt
MIGO < Purchase Data<Cert Reciept :Yes
Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advanceIs the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents. -
In Robohelp 9, search does not work for some Vietnamese characters.
In Robohelp 9, search does not work for some Vietnamese characters.
I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
If you need a more immediate response, you would need to take that up with Adobe support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
Installing Acrobat Pro 9.2 in a Terminal Server Environment
Hi everyone, we're facing massive problems in our attempts to install Acrobat Pro 9.2 in a terminal server environment. It seems to be impossible to convert for example a .doc-file into a pdf via the adobe pdf-printer using a restricted user-account.
-
Is there a way to block the inappropriate content in the podcasts app?
Hello, I am a husband, father and pastor and do a lot of podcast listening throughout the week, but was recently very disappointed to find some very adult content in the podcasts app under "top stations," with seemingly no way to block or monitor pod
-
CS3 saving from actions & batch error, what to do?
Hello! I am trying to edit a big bunch of my photos using actions and the batch script in Photoshop CS3 Extended on Windows Vista. The whole thing falls apart when PS is trying to save during an action sequence (or even if the saving is bypassed by t
-
Channel Grouping - Adjusting send levels simultaneously
Please help! I can happily select multiple channels (for instance 8 channels of a drum kit) and adjust all fadr levels simultaneously but can somebody please tell me how I may adjust all send levels (to a bus) simultaneously? An example: I wish to ad
-
Does anyone know how to get the buttons on the Nano 1st generation to work again once they've stop reponding?